1HZ-500KHz DDS Function Signal Generator FG-100
Main features:
Compact, full-featured , simple operation, easy to carry . You can use the adapter, can
also be a lithium battery.
Together with the oscilloscope can be used to test and measure the electronic circuit testing
and debugging , audio amplifier frequency characteristics and impulse response. As good accuracy
and frequency stability of DDS , is also very suitable for scanning time oscilloscope
calibration factor .
Square wave output attenuator suitable oscilloscope and probe pulse characteristics adjustment.
major technical indicators:
1 Frequency range: sine 1Hz-500kHz ( flat frequency where the output amplitude to 200 kHz,
With a further increase in the frequency of the output amplitude will decrease ) , other
waveforms 1Hz-20kHz ( but not to limit the adjustable frequency limit ,
If you do not ask for distortion and shaking , can further increase the frequency of use ) .
2 Resolution :. 1Hz.
3 Output waveforms : sine, square , triangle wave , sawtooth forward , reverse sawtooth .
4 Sine Wave Distortion : 1kHz or less <1%, 1kHz and above <0.5 %.
5 Output amplitude: maximum ± 10V (P-P).
6 Output Impedance : 50 ohms.
7 DC offset : maximum ± 10V, there are off function.
8 There can be opened and closed filters are well suited to a sinusoidal waveform with a pulse
output .
9 Power : DC3.5-10V. Select DC5V adapter is recommended when using 3.7V lithium battery
batteries.
include:
1pc 1HZ-500KHz DDS Function Signal Generator FG-100
1pc USB to DC power cord
