| Dual 16dBi 1800MHz - Yagi Antenna Kit
for
4G LTE 1800 - MIMO mode.
Wireless Broadband to suit 4G LTE modems with two antenna ports 4G ONLY - NOT suitable for 3G These are the same as our 16dBi 1800MHz Yagi Antennas in our other listing.
This Dual
Yagi Kit comes with special brackets to allow each Yagi to be mounted
at +45deg and -45deg polarization, also known as X-polarization(X-Pol)
to matches the 4G Cell Towers antennas.This
provides the necessary "spacial separation" between the two channels
used to connect your 4G modem at Full Speed in MIMO mode (Multiple
Input Multiple Output) A single
antenna can be used for 4G, but the Dual/MiMo antenna system can
double the Download/Upload speed when the Cell Tower uses MiMo mode. Why do you need this... More info here:
Do I need one antenna, two antennas or a MIMO antenna ? |
| 
| | | Kit includes:
- Dual Antennas shown above.
- 2x Coax cables (select length) with FME female connector.
- 2x Patch Leads (suit the modems shown below)
- 2x Weatherproof tape to seal antenna connection.
| 
| +
| 
|
2x LOW LOSS
*Select coax cable length
option above
| |
2x CRC9 Patch Leads
mfd using very low loss
LMR100A coax | Suits 4G capable modems with two external antenna sockets
Some examples below ... Modem NOT included
|
|
|
| The modems listed are capable of Telstra, Vodafone and Optus 4G on 1800MHz
and are suitable for use with this antenna kit.
Telstra branded modems often need to be unlocked to work with a Optus or Vodafone SIM
|  | |
Optus Huawei E3276 iinet MobiiBroadband 4G
Modem capability: 3G 900,2100 - 4G 1800,2100,2600 *modem not included
| Suit Modems with a CRC9 type external antenna socket ..
| | |
|
|
| | | Find your closest Cell Tower frequency at getme.onwireless.com.au
|
** Alternative MODEM ADAPTERS and LOW LOSS COAX cables also available **
Please contact us BEFORE purchasing if you need to change the kit components.
ask us about....
5m, 6m, 10m, 12m, 15m & 20m, LMR240 and LMR400 SUPER LOW LOSS Antenna Cables.
**
500mm, 1m, 2m, 3m, 7m and 10m LMR195 low loss Coax Cables
suited for connection from a wall plate mounted Antenna Cable or directly to antenna in semi-mobile installations..
**
CRC9, TS9, TS5, MS147, FME, N-type and RP-SMA Modem Adapter/Patch Leads to suit other Modems
**
Note: Adjustments to your order may incur additional costs, so please contact us prior to purchasing.
| | |
| | Electrical Data
| | Frequency: | 1710-1880 MHz
(4G LTE 1800)
| | Gain: | 16 dBi | | VSWR: | <1.5:1 | | Polarization: | Vertical, Horizontal
Dual kit is X-Polar
| | Horizontal Beamwidth: | 27° (vertical mount) | | Vertical Beamwidth: | 23° (vertical mount) | | Nominal Impedance: | 50 Ohms | | F/B Ratio: | >18 dB | | Max Input Power: | 100 W | | Lightning Protection: | DC Ground | Mechanical Data
| | Connector: | SMA Male | | Dimension: | 805mm x 120mm | | Weight: | 0.5kg | | Cable: | 240mm LMR200
| | Reflector Material: | Aluminum Alloy | | Antenna Material: | Aluminum,
Steel Mounting Plate | | Mast Diameter: | Ø30-Ø50mm | | Rated Wind Velocity: | 210km/h | | Operating temperature: | -40~+65°C | | Elements: | 16 |
| | |
|
| | Carrier/Service | Band | Mode | Bandwidth | Compatible? | Telstra/Bigpond/Vodafone
nextG 3G, 3G+
| 850MHz | 3G UMTS/HSPA
DC-HSPA+
| 824~894 MHz | x | Optus, Virgin, Vodafone 3G & GSM
| 900MHz | UMTS/HSPA 900 | 880~960 MHz | x | | Telstra - 4G LTE | 1800MHz | LTE 1800 | 1710~1880 MHz |  | | Vodafone Optus - 4G LTE | 1800MHz | LTE 1800 | 1710~1880 MHz | | Telstra voice/sms
| 1900MHz | UMTS 1900 | 1850~1990 MHz | x | Vodafone, Optus, Telstra
| 2100MHz | UMTS/HSPA
| 1920~2170 MHz | x | 4G LTE 2300
| 2300MHz | Band 40 | 2302~2400 MHz | x | | 4G LTE 2600 | 2600MHz | Band 7
| 2500~2690 MHz | x | | *Services are being continuously updated - subject to change. |
| |
|
| copyright: remoteONE
|
|
