4G MIMO LPDA Directional Antenna Kit
Dual 11dbi 700-2700MHz
Covers all 4GX, 4G, 3G & GSM Bands
For All Service Providers Worldwide
Telstra 4GX 700, 900, 1800 & 2600MHz
Optus 4G 700, 1800, 2300 & 2600MHz
Vodafone 4G 850 & 1800MHz
Telstra Optus Vodafone Virginmobile
All Mobile/Cell Carriers Worldwide
Mobile Broadband and Mobile Phone Antenna
Testing the Optus Huawei E8372 with an External Antenna
This antenna kit comes complete with all coax and leads specifically to suit the modem shown in the title above. Carriers such as Telstra, Optus and Vodafone use for different bands/frequencies for their 3G and 4G services, so this antenna covers all. Listed down the page are the various bands used for 3G and 4G in Australia. Mobile broadband and cell phone services worldwide use bands within the 698-2700MHz range, all covered by this antenna kit.
The Patch Lead and/or Adapter included with this kit suits a number of mobile broadband devices, listed further down the page.
4GX 4G CA MiMo Antenna
Two 11dBi LPDA antennas are mounted at +45° and -45° from vertical to create the "X-Pol" configuration used by all Australian 4G MiMo mobile broadband services.
Many other countries use Horizontal and Vertical polarization for 4G MiMo. The universal brackets supplied allow the antennas to be mounted at whichever polarization is required.
MiMo allows your 4G modem to connect at faster speeds to Telstra, Optus and Vodafone 4G MiMo services.
Also compatible with 4G Carrier Aggregation (4G CA) allowing Category-6 4G modems to connect to two bands simaltaniously. Telstra's 4GX is 4GCA capable in some areas, and will coonect to 700+1800MHz and in future, 700+2600 and even 1800+2600 depending on the service and modem capability.
Package Includes
Two Antennas with SMA Male Connection (only one shown above)
Universal Mounting Brackets.
Double U-Bolts
Minor assembly required to adjust polarization of each antenna to ±45° MiMo antenna configuration.
Two Lengths of Low Loss Coax LL400, LL240 or LL195 (made to the ®LMR standard)
SMA female to FME female
** Select Type and Length **
Two TS9 to FME male Patch Lead
Manufactured to our specification using low loss LL100A coax
UV-stable sealing tape. Enough to waterproof the outdoor connection(s)
This antenna kit suits the following Modems *modem not included
Suits modems having a TS9 type external antenna socket. *Modem not included.
If your modem is not listed above, please Contact-us with the make and model number.
Antenna Specifications
Electrical Data
Gain:
10 / 11dBi
Frequency (MHz)
698-960 / 1710-2700
VSWR:
<1.2:1
Polarization:
Vertical, Horizontal
Using 2x Antennas:
Slant/X-Pol
Horizontal Beam-width:
50°
Vertical Beam-width:
40°
Nominal Impedance:
50 Ohms
F/B Ratio:
>18 dB
Max Input Power:
100 W
Lightning Protection:
DC Ground
Mechanical Data
Connector:
SMA Male + FME female
Dimensions (mm):
445 x 265 x 65
Weight:
1.2kg
Pigtail Cable Length:
300mm
Pigtail Coax:
®LMR200 or equiv.
Element Material:
Aluminum Alloy
Radome Material:
Weatherproof ABS
Mounting Method:
Mast
Mast Diameter:
Ø40-Ø50mm
Rated Wind Velocity:
240km/h
Operating Temp:
-40 ~ +65°C
Type:
Radome Log-Periodic (LPDA)
Dimensions (mm). (Bracket design may vary to that shown)
Coax Cable Quality
There are many suppliers that manufacture coax cables to the ®LMR series specification. Some suppliers cut corners, producing sub-standard coax which does not conform. Shown below is a comparison of the high quality coax we supply with our kits and a sub-standard version.
Our High Quality Coax
Fully Tinned Copper Outer Braid - Resist corrosion and electrolysis - Strong mechanical connection - Lower loss over long lengths
Greater than 90% Braid Coverage - Lower signal loss
Our manufacturer is ISO_9001:2008 certified for Quality Assurance. We continue to assess our manufacture(s) product quality and do not support suppliers that make false claims regarding their products performance by overstating the product specifications. Our products are selected to be 100% compatible with the Australian telco services.
We take care to pack your order with sturdy packaging materials so your item survive the Australia post experience without damage. More Information: ISO9001