Insulating Rubber Lined U-bolt and Backing pad 69 mm ID (suit 50 mm NB pipe)-Galvanised

Manufactured By Graphskill in the UK. Material test certification available (ask for prices)

Product Reference Code: 1108/GALV/050

Please check all the images and dimensions shown below to ensure the product matches your requirements. Do not rely on the photo as they are often generic




For more images, click thumbnail images (above left) to enlarge


Description:

Insulating Rubber Lined U-bolt and Backing pad 69 mm ID (suit 50 mm NB pipe)
 
PAD:
Neoprene Rubber. A multi-purpose material suitable with weathering, sea water mineral oils and grease applications. Good flame retardant, excellent acid resistance, good ozone and oxidation resilience. Not suitable for resistance to aliphatic and aromatic hydrocarbons and ketones.
 
Elastomer: Neoprene
Colour: Black
Quality: Commercial
Grade: C20
Hardness: 65 shore A +/-5
S.G.: 1.4G/Cm3
Tensile MPA: 5 MIN
Elongation: 300%
Tear Strength: 20 Kg/CM
Compression Set: 35%
Operating Temperature: -20 / +110 C
 
SLEEVE:
300 psi Black Air Hose (ISO2398)
Application: For general workshop use and with compressors
Tube: Black NBR /SBR synthetic rubber
Reinforcement: Synthetic textile
Cover: Black, weather and ozone resistance SBR/EDPM.
Temperature range -20 / +90 C
 
Used to prevent galvanic corrosion due to the contact of dissimilar metals in the presence of an electrolyte.
 
Also, for the prevention of wear and / or  crushing of composite, thin wall or non ferrous pipework
 
U-Bolt is galvanised
 
C/W 2 nuts on each leg. If you want to use your own nuts please ensure they are galvanised and tapped oversize
 
 
NB = 50 mm
Pipe O/D = 60.3 mm
A = 68 mm
B = 87 mm
C = 110 mm
D = 10 mm
E = 80 mm
F = 90 mm
G = 30.5 mm
D*A (backing pad) = 25*10 mm
 
Galvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applications
 
Tolerance on dimensions +/- 1 mm. Please note that as we use roll threading, the bar diameter is slightly less than the thread diameter

Extra Information:

Design:Rubber Lined - Insulating
Material:Galvanised
Pipe OD (mm):60.30
U-Bolt ID (mm):68.00
U-Bolt Inside Height (mm):124.00
Thread Size:M10
Centers C (mm):87.00
Leg Length L (mm):90.00
Thread length T (mm):80.00
Nominal Bore (mm):50
Product Type:U-Bolt

Backing Plates: please see our new range at: CLICK HERE FOR BACKING PLATES



Visit our Ebay store for nuts, bolts, washers, u-bolts, pipe clamps, fish tape, exhaust pipe clamps, flat and round bar, studding, Unistrut channel and fixings, plastic pipe clips, shackes, chandlery, turnbuckles, and more:

http://stores.ebay.co.uk/Graphskill-Nuts-and-Bolts



Selling Policies
PaymentPayPal is the prefered payment to help speed up the Transaction
FeesWe do not charge Handling Fees, what you see is what you pay
ShippingWe ship to the UK using Royal Mail and FedEx / UKMail. We ship worldwide using Royal Mail Airmail.
DeliveryAll goods will be sent after payment is received. Usually same day, if ordered before 2 PM, or next day. We will contact you if in the unlikely event of shipping being delayed beyond this time. We ship every Weekday. 

"Express" delivery will be sent via FedEx / UKMail. Please note that the prices offered for Express delivery are only applicable to mainland GB (Not Scottish Highlands). Surcharges will apply to all Islands. Also, If your postcode begins - HS, IV, KW, ZE, AB, FK, KA, PA & PH - please contact us prior to buying as delivery surcharges MAY apply.
Refunds & ReturnsIf we have sent the incorrect item, or the item is damaged, please contact us as soon as possible for a replacement. We will refund the return postage fee on agreement, so please contact us before returning.

If you have purchased the item in error, or it does not fit your purpose for whatever reason, we are happy to offer a full refund provided the goods are returned at your own cost. Contact us before returning the item for details of arrangements.

Please note that full refund only applies to to UK residents Not businesses, under UK distance selling laws). For non UK residents and businesses a reasonable deduction will be made for our shipping costs
Contact UsPlease feel free to email us using the Ebay system at anytime we will reply ASAP. Alternatively email ecommerce@graphskill.co.uk