BRITISH MADE
QUALITY PRODUCT |
BRUSHED MOTOR ESC
20A TRENCH™ HEXFET
SOLID STATE 'H' BRIDGE
Bi-DIRECTIONAL ELECTRONIC
MOTOR SPEED CONTROLLER |
|
Introducing our latest product in Radio Controlled Motor Controllers, this innovative Module efficiently gives you a clean smooth acceleration and deceleration curve from stopped to full power in either forward or reverse (bi-directional).
Features
- Solid State Bi-Directional Output Construction
- Fully Bi Directional (Works in Forward and Reverse Modes)
- 'H' Bridge TRENCH™ HEXFET Design
- Built In 1.1A Low Dropout BEC (Battery Eliminator Circuit)
- Optional 2.2A BEC (available from drop-down selection on ordering)
- Selectable BEC - No BEC Option Jumper
- Automatic LVC (Low Voltage Cutoff) Battery Terminal Voltage Analysis Handles most 5.5v - 12v Battery types
- 20A Maximum Motor Current
- 20A Continuous, Peak 26A, Burst 25A up to 5 Secs.
- Throttle Neutral At Standard 1.5ms, Or 1.37ms For Offset Stick
- F.i.S.T© Finger Safety Technology Arming. (Motor Will Not Start Until Throttle In Neutral Position)**
- Ultra Lightweight SMD (Surface Mount Device) Fabrication
- D/S Frg4 Gold Plated PTH PCB
- Full Specification Rohs Components
Battery and Motor Tails 160mm
RC Lead 150mm
Weight 15g
Voltage 6v - 13.8V
Current Draw 70mA Nom 22mA Quiescent (Not incl. B.E.C.)
An Onboard Jumper allows you to select or de-select the the onboard Battery Elimination Circuit (BEC)
** An Audible tone is can be heard through the Motor windings to indicate that the ESC is armed and ready.
 Download the Product Information Sheet
| This is a hand crafted Surface Mount Technology (SMT), professionally designed all British module, built with top quality RoHS (Restriction of Hazardous Substances Directive) high specification components. |
 |
Battery Voltage Cutoff Table
| BATTERY VOLTS | CUTOFF | BATTERY TYPE |
|---|
6.5V | 5.5V | 6V SLA (Sealed Lead Acid) | 7.0V | 6.0V | 7.2V Ni-Cad(6 cells) | 7.4V | 6.1V | 7.4V Li-Po (2 cells) | 7.5V | 6.0V | 7.2V NiMH (6 cells) | 8.0V | 6.0V | 7.2V Ni-Cad(6 cells) | 8.5V | 7.0V | 8.4V Ni-Cad(7 cells) | 9.0V | 7.0V | 8.4V NiMH (7 cells) | 9.5V | 7.0V | 8.4V Ni-Cad (7 cells) | 10.0V | 8.0V | 9.6V Ni-Cad (8 cells) | 10.5V | 8.0V | 9.6V NiMH (8 cells) | 11.0V | 8.0V | 9.6V Ni-Cad (8 cells) | 11.1V | 9.0V | 11.1V Li-Po (3 Cells) | 11.5V | 11.1V | 12V SLA (Sealed Lead Acid) |
The ‘CUTOFF’ Voltage is Battery Terminal Voltage (tV) that the ‘ESC’ will shutdown to prevent damaging the battery cells and the case of a LiPo Pack probably cause them to go on fire. i.e. a 12v Sealed Lead Acid Battery has a spent life terminal voltage of 11.1v.
20A 'H' BRIDGE ESC DRAWING
RECOMMENDED INSTALLATION
|
Should you wish to speak with us about this product, kindly please remember we are a Micro-Business, WE DO NOT HAVE a dedicated sales desk or enquiries/support staff consequently it may take a few attempts to speak with us. If you find this frustrating, please drop us an email with your name and a phone number and we will return your call as promptly as possible. (U.K. ONLY) |
Telephone Technical Support Line supplied with order (9am - 5pm GMT)
**** Please contact us by e-mail for further details****
PRODUCT
Find out what others say about our products and service
|