Instructions
1.Place the patch on the area would like to use,please make
sure the base of the chosen item is not creased and flattened
either with your hand or an iron.
2.Heat up the iron to the setting your fabric/material can
tolerate to help the adhesive on the bottom of the patch to stick.
3.Place a thin piece of cloth or tea towel onto the front side face
of the patch then slowly press down onto the cloth/tea towel,
add as much pressure as possible for 10-15 seconds
4.Remove the iron from the piece of chosen material,before
checking the patch please make sure cooled down a little, then
remove the material to feel round the edges to see if stuck down
fully.
5.If not fully stuck down,place the material over the patch and with
the iron add pressure to the area for 10-15 seconds.