The FE Power #13001 cast aluminum intake manifold adapter is designed to fit all FE series engines (332-352-360-390-406-410-427-428), with standard low riser or medium riser cylinder heads.  This adapter allows any 351C 4V intake, that will fit the factory 351C 4V heads, to be installed on the FE engine.  351C 2V intakes can also be installed, but port matching will be required.  Two of the photos show an Edelbrock Torker II and a Weiand tunnel ram positioned on the adapter.  Please note that this advertisement is for the ADAPTER ONLY, and does not include the 351C intake manifold.

This intake manifold adapter provides the following features:

- The adapter allows use of a variety of 351C intakes, including single and dual planes, tunnel rams, Weber and injector manifolds.

- Ports in the intake adapter are CNC machined, and are designed to fit medium riser or low riser FE cylinder heads, and aftermarket 351C 4V intake manifolds such as the Edelbrock Torker II and the Weiand tunnel ram.  The ports are slightly undersize to allow port matching to the application.

- With the adapter in place the intake manifold can be changed without having to remove the valve covers, pushrods, rocker arms, and distributor, and the water jacket seal between the cylinder head and the intake adapter remains intact.

- The valley of the engine is accessible through an access panel, after removal of the 351C intake.  Flat tappet lifters and most roller lifters can be removed and replaced through this opening.  The access panel and the machined road draft tube cover at the back of the intake adapter seal to the adapter with O-rings; no gaskets are required.
 
- The intake adapter comes complete with six allen head capscrews required for installation, and is completely Made in USA, by FE Power LLC.

Notes: 

     - In order to clear the water jacket on the intake adapter, a stock-type 351C 4V intake manifold must be modified to remove a portion of the front rail.  This can be done using any number of methods involving cutting, grinding, or machining.  A template for the required modification is included with the intake adapter.  After this modification, the 351C intake manifold is no longer suitable for use on 351C engines.

    - This intake adapter will fit aftermarket heads such as Edelbrocks, Survival Motorsports, and BBM.  However, please note that if extensive porting has been done on the heads, and the roof of the port has been raised by more than 0.250", there may not be sufficient material above the port on the adapter to permit a good sealing surface.  FE Power LLC offers a different version of this adapter for heads with significantly raised ports; please contact us for details.
 
    - This intake adapter will fit the early version Blue Thunder medium-riser cylinder heads, but not the later version with the large ports.  FE Power LLC offers a different version of this adapter for those cylinder heads; contact us for details.

    - This intake adapter will not fit high riser or tunnel port heads.  FE Power LLC offers a different version of this adapter for those cylinder heads; contact us for details.

     - This auction is for shipment to US destinations only.  If you are not in the US but would like to purchase one of these adapters, please contact us for international shipping information.