M K MORSE MATRIX 11 BI-METAL METAL CUTTING BAND SAW BLADE
1575 MM (62")-6.4 MM (1/4")-0.025-10/14 TPI
Matrix 11 is a general purpose blade ideal for cutting materials with easy to moderate machinability. Manufactured with Special high speed steel teeth edges and attached to a special alloy steel backer. The result is a Bi-Metal material that provides higher heat and wear resistance for longer life. Matrix 11 blades are ideal metal cutting blades suitable for maintenance shops and small fabricating shops and keen hobbyist.
WHY BUY MORSE BLADES
Manufactured in Morse’s advance manufacturing plant in the USA. Featuring annealed welds to prevent brittleness. These industrial blades have a minimum gauge of 0.025 mm which increases to 0.042 as the width as the blade increases (unlike inferior quality blades using 0.014 mm), this result in a blade that consistently cuts straighter and for longer due to its hardened tooth tips.
Features & Benefits
Applications:
Aluminum castings, carbon steel, structural steels
REMEMBER WE CAN SUPPLY ANY SIZE AND TYPE OF MORSE BAND SAW BLADE
TO CUT WOOD , METAL AND PLASTIC
How To Select The Correct TPI
Tooth Selection Guide
Having the correct number of Teeth Per Inch (T.P.I.) is very important!
Too fewer teeth and the teeth will break off, too many and the tooth gullets will become too full, this will:-
1. Reduce the blade life.
2. Cause inaccurate, uneven, rough cuts.
All of which can, again end up being very expensive.
A good guideline is:- A Min of 3, max of 24, ‘sweet spot’ of 6 to 12 teeth in the work piece at any one time.
MORSE Matrix 11 Bi-METAL BANDSAW BLADE SPECIFICATIONS - Please Select sizes
Blade Construction -- Welded Bi-Metal Band With 5% Colbolt
Blade Length -- 1,575 mm, 62 " Inches, 5 ' 2 " Feet
Blade Width -- 6.4 mm, 1/4 " Inches
Blade Gauge -- 0.64, 0.025 " Inches
Blade TPI -- 10 / 14 Variable TPI
This Blade length is Suitable for :
Rexon BS12RA, Sealey SM12, CBS12WV
Please Check Maximum Machine Width