5V 5A 25W | (3.46 x 2.36 x 1.38)"/(8.8 x 6 x 3.5)cm |
4.30oz/122g |
85V-265V |
5V 10A 50W | (6.38 x 3.86 x 1.65)"/(16.2 x 9.8 x 4.2)cm |
10.76oz/305g |
85V-265V |
5V 20A 100W | (7.99 x 3.82 x 1.65)"/(20.3 x 9.7 x 4.2)cm |
15.34oz/435g |
85V-265V |
5V 40A 200W | (7.87 x 4.91 x 1.93)"/(20 x 11.2 x 4.9)cm |
20.10oz/570g |
85V-265V |
5V 60A 300W | (8.46 x 4.45 x 1.93)"/(21.5 x 11.3 x 4.9)cm |
22.58oz/640g |
85V-265V |
5V 70A 350W | (8.46 x 4.45 x 1.93)"/(21.5 x 11.3 x 4.9)cm |
22.75oz/645g |
85V-265V |
Feature:
Universal AC input/full range
It's good quality & high performance
100% full load burn-in test
Protections: overload/over voltage/short circuit
Cooling by free air convection
(Not suggest for use in bathroom)
Applications 5050 3528 5630 3014 LED SMD Strip Light Lamp.For LED Strip, Wireless Router, DSL Modem, Network Hub, Switch, Security Cameras
Package included:
1 x Power Supply Driver for LED Strip Which you choose
This Power Supply Unit "DOES NOT" come with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.
About Calculate Method:
If Your LED Strip 60LEDs/m, and each LED 0.2W, then calculate max LED Strip Length: 0.2W/LED × 60LEDs/m=12W/m, 24W(this listing)÷12W/m=2m, so, support the LED Strip(60LEDs/m, 0.2W/LED) Length (Max)=2m.
AC: Alternating Current
DC: Direct Current
L/N: Connect Alternating Current
-V (COM): Output Negative
+ V: Output Positive (The output polarity cann't be reversed.)
FG: Connect Ground Wire
ADJ: Output Voltage Trimmer
Connection:
L, N: AC power input
GND: DC power output "-"
V: DC power output "+"
+V / ADJ: Adjust the output voltage
Safety Compliance: CCC/ FCC / CE
Working Temperature: 0~40C
Storage Temperature: -20~60C
Ambient Humidity: 0~95% Non-Condensation
Type: Power Supply
Output Voltage: 12V/24v
Efficiency: 80%
Output Ripple Noise: 100mV
Output Voltage Accuracy: 10%
Load Regulation Rate: 5%
Modulation Mode: Pulse Width Modulation FM
Note:
1.This is a DC12V or DC 24V (your choose)Power Supply Unit for professional use on LED lightning, Security Surveillance System, CCTV Security Camera, IP Camera, and etc.
2.Safety design with shortage protection, overload protection and auto voltage switching.
3.Regulated voltage & current output. This is a perfect choice to use as a LED Driver for all type of LED lighting 3.without flickering light & ensue the life span of your LED.
4.Full range of current output is possible for LED lighting with dimmable function.
5.Voltage output fine adjustment is available for different power condition.