Kenwood TS 2000 E Demonstration Model
Kenwood TS 2000 E HF/VHF/UHF All Mode Transceiver.
Kenwood TS 2000 E Demonstration Model
Supplied With 12 Months Warranty.
Click Here for Leaflet.
Kenwood TS 2000 E.
This one transceiver covers the HF/50MHz/144MHz/440MHz (1200MHz is optional with UT-20) bands (SSB, CW, FSK, FM and AM modes), with output of up to 100 watts (440 MHz: 50 watts; 1200 MHz 10 watts).
Since it is equipped with independent 144/440MHz sub band reception (AM/FM modes only), simultaneous reception on two bands is possible: HF by V/U, V by V, U by U and V by U.
Kenwood TS 2000 E.
A typical application might be to gather local information on 144/440 MHz at the same time as using HF for long range operations.
A ‘Black Box’ model (without the control panel) is also available: this can be used in a vehicle with a mobile head, or controlled by a PC (software provided).
Kenwood TS 2000 E.
IF DSP.
The transceiver is equipped with an IF DSP for main band use(AF DSP for
sub bands), TS-870 technology has thus been adopted for all-mode
applications – VHF and UHF as well as HF.
The combination of digital IF filters and IF DSP slope tuning results in enhanced versatility.
With digital IF AGC (controlling IF gain via DSP), it is possible to set the time constant separately for each mode.
Also, the IF auto-notch function makes it easy to remove interference while automatically tracking with DSP-based adaptive filtering. Additionally, the AF stage beat cancel is capable of eliminating multiple beats at the same time; manual operation (manual notch for dealing with a single wave) is also permitted, which is convenient for CW use.
For noise reduction there is a choice of NR1 (line enhancer for SSB), and Kenwood’s original NR2 (SPAC), which is popular amongst CW operators.
As with the TS-570, the operator can make use of CW auto tuning, while the availability of a DSP for SSB/CW/FSK/AM variable demodulation puts the transceiver a cut above analogue equipment.
Kenwood TS 2000 E.
TNC.
Kenwood’s own 2-chip TNC (1200/9600bps) enables sophisticated data
communications (excluding ARPS). Packet cluster information, so vital
for HF operators, can be displayed on the LCD.
Moreover, this data can be used for automatic tuning, though it is not possible to connect to a node station using the internal modem. And as DX cluster information received on a sub band can be used instantly for the main band setting, the transceiver operator has an advantage when tracking sought after stations.
Kenwood TS 2000 E.
The Kenwood Sky Command Systems (KSS) II is even better.
Whereas it has been necessary to use two FM transceivers – the commander and the transporter – the latter is now effectively built into a transceiver (TH-D7A or TM-700A) is needed to conduct HF operations by remote control.
Kenwood TS 2000 E.
Other features.
Built in auto antenna tuning (HF/50MHz) with preset memory.
Auto tracking satellite functions (cross mode compatible) using IF DSP.
± 0.5ppm high stability oscillator (-10°C – +35°C).
Mobile head remote controller (option) for vehicle installation.
Kenwood TS 2000 E.
Specifications.
Wide Band reception Main: 30 KHz ~ 60 MHz, 142 ~ 152 MHz, 420 – 450 MHz, 1240 ~ 1300 MHz (after dealer modification).
Sub: 118 ~ 174 MHz, 220 ~ 512 MHz (FM/AM Modes only).
Output HF/50/144 MHz: 100 W.
440 MHz: 50 W.
1200 MHz: 10 W.
Dimensions (W X H X D): 270 X 96 317 mm.
Options.-MC-60A, SP-23, DRU-3A, VS-3.
Kenwood TS 2000 E.
