PART# 3806
DESCRIPTION: INNOVATE LM-2 Single Channel Wideband W/ OBD-ll
NOTE: NEW
* Patented “Direct Digital”
Wideband Technology
* Wideband O2 Compatible with ALL fuel types
* Single or Dual Channel Version Available
* OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN
OBD-II Data
* Log directly to SD card (included)
* Playback log data on screen and/or with powerful LogWorks software
(included)
* Large high-contrast graphics LCD
* Built-in RPM converter (direct frequency or with optional inductive
clamp)
* 4 fully-differential analog inputs
* 2 configurable linear analog outputs
* Positive lock connectors for all connections
* Innovate MTS serial IN and OUT
* USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to
connect to analog gauges, dyno computers, ECUs, piggyback controllers,
and other devices with analog inputs. Analog output 1 comes setup from
the factory ready for narrowband simulation; analog output 2 is
configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the
provided LM Programmer software these analog outputs may also be
configured by the user.
The LM-2 Kit (Single Wideband O2)
includes: the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft
sensor cable, cigarette-lighter power adapter, analog in/out cable,
ODB-II/CAN interface cable, SD memory card, USB cable for PC
connection, weld-in bung LogWorks software CD, and
quick-start guide. Carrying Case also included! P/N: 3806
Installation
and Setup
Installation of the LM-2 is relatively simple. Complete documentation
is supplied, and the support pages, user forum, videos, application
notes and tuner resources can also speed you on your way to effective
tuning. Innovate also has a great network of local dealers, tuners,
race shops, and dyno shops that can assist you in choosing, installing,
and getting the most out of your Innovate products.
Please ask us for INNOVATE LM-2 MANUAL IN ENGLISH
Logworks 3 for WiFi PC's with Innovate OT-2 WiFi Interface:
LogWorks
is a software application that interfaces with the Innovate Modular
Tuning System
products. It enables easy analysis and manipulation of engine data
acquired by MTS components
and also allows to view engine data in real-time on the on-screen
virtual gauges.
Computer Requirements
Operating System Windows 98 or later
Computer speed 600MHz Pentium 1 or faster
RAM Min. 100 Mbyte more than recommended for the
operating system
Hard Disk space Min. 100 Mbyte free space
Display Thousands of colors, 800 x 600 Min.
Other 1 free serial port or USB to serial adapter
The LogWorks application is used to record, display and analyze engine
or car data. Natively it provides six different “views” of the data:
1. Main Dashboard
This view displays the current engine data (real-time data) in
“gauges”. Similar to a car’s dashboard. The gauges are configurable in
many ways. This view is active whenever LogWorks receives engine data,
whether the data is being logged or not.
2. Time Trace Log View
This is the main view of a datalog. A datalog is a collection of engine
data, sorted by recording time. The data in the Time Trace Log View
(Log Window) is shown graphically and can be analyzed in many ways.
During recording with LogWorks this view is updated automatically as
new data arrives.
3. Playback View
This is a sub-view of the Time-Trace Log View when the log is played
back. This view is similar to the Main Dashboard View, but shows the
recorded engine data in it’s time sequence when playing back.
4. X-Y Plot View
In this View the logged engine data is shown in its dependency of
another channel. A common example is to plot AFR as dependent on RPM.
But any channel data
combination can be used. The X-Y Plot view also allows viewing and
analyzing the data in different ways. This view is NOT automatically
updated during recording.
5. 3D Chart View
In this View the logged engine data is analyzed and shown in its
dependency of two other channels. A common example is to show AFR data
as dependent on RPM and engine
load. But any channel combination can be used. This view sorts the
engine data into
different fields. The spacing and number of field columns and rows is
user adjustable so it for example fits the spacing and number of how a
fuel injection’s fuel tables are stored.
This view is automatically updated during recording and provides many
analyzing
functions.
6. Channel Statistics View
In this view a single channel is analyzed and its statistical
distribution during a recording session is shown. This view is NOT
automatically updated during recording.
Please ask us for Logworks 3 and Manual
Regarding all questions about installation and warranty of this product, please contact "CTG Customizer"
CTG
Customizer
TEMPLE WOOD
Stock Road
Chelmsford
CM2 8LA
Essex
Phone: 07704842833
Regarding all questions about sales, delivery and
other, please contact us:
Xenon UK offers Customer Support 24
HOURS 7 DAYS A WEEK
phone +44 20 8144 0803
IMPORTANT
MUST READ:
EBAY IS OUR LIVELIHOOD. YOUR
FEEDBACK MAKES A HUGE IMPACT ON OUR TEAM. PLEASE BE CONSIDERATE WHEN
GIVING FEEDBACK.
IN EBAY'S BOOK 4 STARS IS A BAD RATING. PLEASE GIVE US 5 STAR RATINGS.
BUT IF YOU CAN'T GIVE US 5 STARS IN DSR RATINGS, THEN EMAIL US AND YOU
WILL ALWAYS FIND US AT ARM’S LENGTH TO HELP YOU IN ANY WAY POSSIBLE.
THANK YOU!
SHIPPING: Shipping EU: FREE
NEXT DAY by UPS EXPRESS
(excluded holidays) Some
regions may be required a minimum surcharge for shipping by
courier
We are Xenon UK, international company, with main location in London, UK and few worldwide shipping warehouses, located in United Kingdom, Germany, USA, Japan and Australia. We have distributor accounts in many performance and tuning brands, included AEM, Innovate Motorsports, Greddy, Apexi, PLX Devices, DEI, Exedy, Supersprint, Stoptech, Momo, Morette and this list is growing up monthly!
Our goal - we are offering best prices, FREE shipping for most products, fastest delivery time and saving on import duties - we will ship your order from closest to you location, you can get it fast, often next day, and because it will be shipped from same area, you don't have to pay any import duties.
Our contacts: Ph: +44 20 8144 0803
We accept: Paypal as main payment method, all major credit cards frow Paypal and bank wire transfer as alternative payment method. Contact us if you would like to pay by bank wire transfer.
We do not accept any kind of checks or money orders. Payment must be received within 7 days after purchase.
From Europe: we are using TNT/FEDEX for all orders more then 0.5kg. Small and lights parts(less then 0.5kg) we ship by priority airmail.
From USA: we are using USPS priority mail or EMS Express mail. Inside USA - FEDEX ground.
From Japan: we are using EMS Japan.
Orders shipped inside Australia shipped only by Australia EMS.
Please always read item description with product specific shipping location and shipping information.
All of our products are 100% brand new unless otherwise stated in the description above.
All sales are final unless item is defective upon delivery
Please inspect your order upon receipt. No claims will be honored after 5 days of delivery.
We will reimburse you the actual shipping fees for exchange if we shipped incorrect quantity, incorrect item or defective item.
We reserve the right to retract bids from any bidder with a history of negative feedback/non-payment. Please respect the integrity of eBay, only bid if you intend to follow through with your purchase.
Return for exchange or refund will be allowed only within 14 calendar days from the date of receipt. All authorized return merchandise must be unused and in its original saleable packaging. No return or exchange on merchandise that shows signs of having been installed, mounted, scratched, or defaced will be allowed. RETURN AUTHORIZATION NUMBER must be issued before any returns can be made. We will not accept any returns without this number. The Return Authorization Number does not imply a replacement or refund, but only that we will inspect the merchandise based on your claim. Original shipping and handling charges are not refundable. It is the responsibility of the customer/installer to verify the correctness of size and application of the parts before installation. We cannot be held responsible for parts ordered for the wrong application. If a correct part is ordered, but shipped incorrect, we will make all efforts to make good at no extra charges. Warranty - we are offering full manufacture warranty. Please read product specific warranty terms on manufactures websites. No warranty whatsoever will be valid if the defect was caused by customers abuse, negligence, and/or mishandling. All merchandise sold by Xenon.LV. is only subject to manufacturers warranty, if any, and are subject to submission to the manufacturer for approval for repair or replacement of merchandise.