KTM 690 Duke Series (12-17) DNA Air Box Filter Cover Stage 2 P-KT6SM13-S2 KTM 690 Duke ABS/R (13-17)

DNA Air box filter cover S2 with DNA S1 filter air flow:248.60CFM, DNA Increased air flow:+122,36%

KTM 690 Duke Series (12-1
DNA Filters
Supplier : DNA Filters
Part Number : DNA-KTM-0150
Supplier Warranty
Official DNA Filters Distributor

The DNA Stage 2 Kit, can be either a DNA filter or a DNA cover that is designed to replace a part of the air box, seriously increasing air flow to the engine. With the proper fuel recalibration the results are always very impressive.

Product images

KTM 690 Duke Series (12-17) DNA Air Box Filter Cover Stage 2 P-KT6SM13-S2KTM 690 Duke Series (12-17) DNA Air Box Filter Cover Stage 2 P-KT6SM13-S2KTM 690 Duke Series (12-17) DNA Air Box Filter Cover Stage 2 P-KT6SM13-S2KTM 690 Duke Series (12-17) DNA Air Box Filter Cover Stage 2 P-KT6SM13-S2

product details

Features

Make: KTM

CC:690

DNA Filtering Efficiency: 98-99%

 

Product Information

  • the official release of the new DNA Stage 2 Air Box Filter Cover for the following KTM models:
    • 690 DUKE (2012)
    • 90 DUKE ABS (2013)
    • 690 DUKE R ABS (2013)
  • This S2 Air Box Filter Cover features DNA's advanced FCd(Full Contour design).
  • Installation info are included with this new DNA Stage 2.
  • A specially made Laser cut supporting frame is included with the DNA filter.
  • The filtering efficiency is extremely high at 98-99% filtering efficiency (ISO 5011), with 4 layers of DNA Cotton.
  • The flow of this new DNA Stage 2 Air Box Filter Cover (P-KT6SM13-S2) combined with the DNA Stage 1 air filter (P-KT6SM13-01) is very high, 122.36% more than the KTM stock application!
  • DNA S1 & S2 Fcd air filter flow: 248.60 CFM (Cubic feet per minute) @10"H2O corrected @ 25degrees Celsius.
  • KTM stock paper filter: 111.80 CFM (Cubic feet per minute) @10"H2O corrected @ 25degrees Celsius.
  • This DNA filter is designed as a High flow Air filter for:'Road & Race use'.
 
 

The Anatomy of a DNA High Performance Filter

This is what Power is made of!

A DNA High Performance Filter is a high quality, next generation multilayer cotton gauze,flameproof, oil impregnated air filter.

FCD_Article
 

1. The DNA Cotton

FCD_Article_Small_1

This very special cotton is designed by DNA's R&D engineers for High Performance filtering purposes. The basic media is a non woven surgical cotton gauze with a modified TEX & THREAD, with extremely high strength of break. This unique cotton media, actually is a "hairy hybrid" featuring extremely high air flow rates and excellentfiltering efficiency that exceeds 98%.

 

2. The DNA Wire Mesh

FCD_Article_Small_2

The DNA wire mesh, is a very special material designed by DNA's R&D engineers. Made out of marine grade 5000 series Aluminum, features a unique "wrap & fill" and precisely calculated wire diameter, to have the necessary high tensile strength and elasticity to last a lifetime. Additionaly it is protected against oxidation by a fine layer of epoxy coating. The DNA wire mesh is designed to perfectly support the cotton layers and at the same time not restrict the air flow.

 

3. The DNA Filtering Media

FCD_Article_Small_3

The DNA Filtering Media consists of 4 layers of DNA cotton, sandwiched between 2 layers of DNA wire mesh, precisely pleated all together. We produce a very wide selection of media, starting from 8 mm to 50 mm height, with an infinite size of "Pitch". Actually we can choose from an unlimited combination of DNA Filtering Media when designing a new filter. Another important feature of our filtering media is the "Large pleat edge radius". This feature allows the edge to be an active part of the filtering media, instead of a "dead" inactive area as our competitors is. The result is a unified high air flow of the filter. The only drawback of this design is that the media is very sensitive during production before molding and must be handled with extreme care, increasing the production cost.

 

4. The DNA Filter Oil

FCD_Article_Small_4

This is an extremely important part of the DNA filter. As soon as the DNA Oil is added to the cotton media, the cotton is "static charged" and transformed into an unbeatable filtering material! To achieve this fantastic result we have developed a unique air filter oil formula. The specifications of our DNA Air Filter Oil are as impressive as our filters are. Humidity will not attack the oil, even if the filter is submersed in water. The flow of the filter remains unchanged even under extreme rainy conditions with high humidity. (We have seen many competitors' filters transformed into a "milky mess" when it rains, severely reducing the performance of the engine). The oil has low viscosity, plus very high temperature resistance and stability. It will uniformly spread and stay on the filter regardless the temperature. Additionaly, it is UV resistant and easily soluble to assist cleaning the filter.

 

5. The DNA PU (elastomer polyurethane)

FCD_Article_Small_5

The DNA PU is a thixotropic material, that we use to manufacture the high quality "frame" of the filter, with unique material specifications. High tensile strength with the necessary hardness for each application, high temperature, fuel and oil resistance, the DNA PU will keep the filtering media in place, it will absorb vibration and will last for a life-time.

 

6. The DNA EVA (Ethylene Vinyl Acetate polymer) closed cell seals

FCD_Article_Small_6

We use only high quality EVA seals. Precisely cut and factory installed (glued) using industrial grade adhesive, guaranty a perfect airtight sealing and trouble free filter installation for the user. The DNA EVA seals and the industrial adhesive are fuel, oil and temperature resistant. Additionally the DNA cleaner will not affect them when the filter is cleaned!

 

7. The DNA FCd design technology

FCD_Article_Large_7

The DNA FCd design or "Welcome to the Future"! At least 20% and up to 80% more filtration area, using DNA FCd technology is common. The unique revolutionary design, an innovation by DNA, allows the pleated filtering media to follow precisely the air box contour, regardless the complexity of the shape, seriously increasing air flow. Taking advantage of the complete footprint of the air box, we eliminate "dead spots" that rob power. If the area is there why not use it!

 
FCD_Article_Small_7
 

DNA Test & Results

The DNA Flow and Dyno Tests.

We test every single filter. Satisfaction guarantied.

The DNA Air Flow Tests

For the air flow tests, we use the most advanced flow bench available today.

The ROTRONICS FlowScan, is a totally computerized flow bench that measures:

  • Mass of the air,
  • Flow of the air,
  • Temperature of the air,
  • Absolute air pressure,
  • Differential air pressure,
  • Speed of the air at various points (Pitot tubes),
  • Absolute humidity of the air.

The complete procedure is automated and computer controlled, eliminating human errors.

 
dna_test_1
dna_test_2
dna_test_3
 
dna_test_4
dna_test_5
dna_test_6
 
dna_test_7
dna_test_8
dna_test_9
 

The DNA Dyno Tests

For the Dyno Tests, we use the industry standard Dynojet chassis dyno equipped with eddy current load control, Dynojet 250LC. Our dyno cell is equipped with a variable flow air cooling system, designed to precisely simulate real world conditions.

 
dna_test_10
dna_test_11
dna_test_12
 
dna_test_13
dna_test_14
dna_test_15
 
dna_test_16
dna_test_17
dna_test_18
 
dna_test_19 dna_test_20 dna_test_21
 

FAQs About DNA Air Filters

Does the DNA filter provide the same level of protection as the OEM filter?

Yes and even better, the DNA filters have a filtering efficiency of minimum 98% (ISO 5011 test). Good quality OEM paper filters are from 97% to 99% and the foam filters are from 92% to 97%.

What is filtering efficiency?

Filtering efficiency is the amount of "dirt" the filter can maintain (stop) and protect the engine efficiently. For example, the DNA Filter for every 100 grams of dirt that it will receive, it will "trap" 98-99 grams, and this applies even to fine dirt as small as 5 microns.

What is ISO 5011 filtering efficiency test?

The percentage of dust that the filter retains during a laboratory test, following the ISO 5011 protocol.

How does DNA measure the airflow and why is this data useful for me, the end user?

DNA uses the most advanced computerized ROTRONICS flowbench available today. The complete procedure is computer controlled/automated, to avoid human error. Additionally, wa always test the DNA filters back to back, the same day and time, with the stock OEM filters and publish the results. Reading our data, you can immediately see the differences in air flow, between the 2 filters and what to expect by using the DNA filters.

Other performance filters manufacturers, claim air flow data much higher than DNA for the same model, is it possible? I also tried to find the stock OEM filter flow data from them to compare.Can i use the DNA Data?

It was brought to our attention, so we purchased the filters and tested them back to back at the same set pressure, with our DNA and the stock OEM filters. Well guess what, the data claimed were false, nothing to do with the reality! Of course the flow was higher than the stock but much lower compared to the DNA! No wonder they never compare it with the stock, as they can't claim 300% (!) increase in air flow over the stock OEM filter. Only data measured back to back the same time are comparable, don't forget we are measuring air! This is why we always publish the stock OEM data.

Can I change my OEM filter with a DNA without changing fueling?

In cases the air flow of the DNA Filter is extremely high we include with the filter special instructions.

I have heard that only the foam filters are good for Off-Road use not the cotton ones. Can I use the DNA filter for Off-Road use?

DNA has developed a unique filtering media that is perfect for off-road use. During the toughest rally in the world, DAKAR 2011 in Argentina - Chile, one of the factory Aprilia 450 Rally bikes, was racing with DNA filter. The results were very impressive compared to the rest of the team's bikes racing with foam filters. Every evening when the bikes were serviced, compared back to back the DNA filter and the foam filters, absolutely no dust had passed through and the engine was like new! Not to mention that one filter was enough for each day, compared to 2 or 3 foam filters per day the other bikes had to use. So this myth is busted!

Can I use the DNA filter un-oiled? Must I always apply oil after cleaning it?

No, you must never use the DNA filter un-oiled. The oil is a crucial part of the filtering media. You must always apply the Special DNA filter oil, not just any oil, after servicing the filter.

 
 

Absolutely no, DNA uses very special thixotropic polyurethane that will not leak in the filtering media reducing the active filtering area, when we produce our round filters. Concerning the panel filters, we will allow a controlled 3 to 5 mm leak, that is nothing compared to the uneven 10 to 15 mm leak that our competitors have.

DNA_Competitor
 

I have a race bike. Do I need to use a filter and if yes why DNA?

Race bikes must be kept always in top condition, especially the engine. Debris and flying bugs found at the track, plus rubber from the bikes' tires in front, can seriously damage the engine. DNA will provide the maximum air flow and at the same time maximum protection. We do not compromise filtering efficiency in order to increase flow; we increase air flow using our revolutionary FCd design, maintaining the 4 layer reliable DNA filtering media. If you want the highest air flow and filtering efficiency of 98% for your race engine, then your only choice is DNA.

 
 
FCD_Article_Large_7

The DNA FCd design is an innovation by DNA. It allows the pleated filtering media to follow precisely the air box contour, regardless the complexity of the shape. Using the complete footprint of the air box, we eliminate "dead spots" that rob power and at the same time seriously increase air flow. Using DNA FCd technology, at least 20% and up to 80% more filtration area is common!

 

How often do I have to clean my DNA filter?

The servicing intervals depend on the environment that the vehicle is used. Once a year or every 15.000 to 30.000 km is suggested, to keep your DNA filter in top condition. An easy way to check if the filter needs cleaning, is to see if the wire mesh that that is on the dirty side, is visible.
If you can see the mesh, you can continue using the filter. If the mesh is totally covered in debris, you must clean the filter.

Can I use gasoline, thinners or compressed air to clean my DNA filter?

Absolutely no! You must treat your DNA filter as delicate textile. How woulld you clean an expensive and delicate garment? First of all read the cleaning instructions, then follow them carefully. Every DNA filter packaging & the DNA service products include detailed cleaning instructions. The procedure is very user friendly.

 

DNA Stage 2 & Stage 3 Applications

 

Your favorite power booster solutions!

 
Stage2_Series

The DNA Stage 2 Kit, can be either a DNA filter or a DNA cover that is designed to replace a part of the air box, seriously increasing air flow to the engine. With the proper fuel recalibration the results are always very impressive.

Stage3_Series

The DNA Stage 3 Kit, consists of a complete air box and filter, designed to replace the existing OEM air box, improve air circulation around the filter and air flow to the engine. Power increase up to 12 HP is common with the S3! The S3 includes all the necessary hardware and installation information.

 

The Reddot awarded DNA Stage 3 application!

 
Stage3_Reddot

See the complete DNA Stage 2 & 3 range here.

 

SHIPPING COSTS

Shipping LocationPostal*Courier**
Europe10.0013.00
Worldwide13.4033.50
United States22.60

* In the table below we display all available Shipping Locations with their Postal and Courier Shipping options.

** In order for your item to be sent with courier postage , please select Express Int'l Postage

SHIPPING COUNTRIES

Shipping LocationPostalCourier
AUSTRALIA
AUSTRIA
BELGIUM
BULGARIA
CANADA
CROATIA
CYPRUS
CZECJ REPUBLIC
DENMARK
ESTONIA
FINLAND
FRANCE
GERMANY
HUNGARY
IRELAND
ITALY
LATVIA
LITHUANIA
LUXEMBURG
MALTA
NETHERLANDS
POLAND
PORTUGAL
ROMANIA
SLOVAKIA
SLOVENIA
SPAIN
SWEDEN
UNITED KINGDOM
USA
VATICAN CITY

GENERAL INFORMATION

We ship orders out as soon as possible, but this will not always be the same day as your order. Orders are shipped from our Warehouse in Greece. In general, for items in stock we usually process and ship them the same day if the order is placed before 1pm local time otherwise they will be shipped the next business day. For orders placed with Courier Service before 7pm local time, they will also be shipped the same business day. In any case if the dispatch time is different than the usual, you will be notified via email or via phone. If we anticipate a longer lead time, it will be noted in the item description.

In case your order is not in stock we will give you an estimated shipping time by a follow-up email.

You should receive an email confirming your order shortly after you’ve placed it. If you don’t receive that email, please check your spam folder and see if you can locate it. This is especially important because, if you haven’t received the order confirmation email, you also won’t receive the email with your shipment notification and tracking information. When your order gets a tracking number you will receive an SMS with the tracking number (only if you entered your mobile phone when you registered). You can also check your order status in real time by visiting https://trace.telemati.ca and providing your transaction ID.

As a shipping service we use the global postal service network. We ship all orders with a tracking number and signed for. For customers that need their parts urgently we offer UPS and DHL Courier Service. UPS and DHL are using their global network to deliver on time for your needs the products ordered. This service is optional and it comes with an extra charge.

If you have any questions about the lead time on a specific item, please contact us with your questions.

shipping

SIGNATURE REQUIREMENT

All items with a value of more than 50€ are shipped signature required if possible; please plan accordingly. Please contact us as soon as possible and be sure to include your order number (Transaction ID). Please note that, in this case, you will be accepting responsibility if anything were to happen to the package.

INTERNATIONAL SHIPMENTS

We do ship internationally.

There are a few things to be aware of, however: you, the buyer, are responsible for any VAT, tariff, duty, taxes, handling fees, customs clearance charges, etc. required by your country for importing consumer goods. Please do your research so you’re ready to get your package cleared through customs, and have an idea of what the additional cost will be.

BACKORDERS

If you have backordered items in your cart at checkout, those items will not be shipped to you until the item(s) are in stock and available to ship. During the checkout process, you will be able to select if you want all of your items to be shipped together or separate. You will be able to see expected ship dates for backordered items, but these dates are subject to change. You will not be charged additional freight for backordered items that do not ship with your original order.

DELIVERY TIMES

Depending on the shipping method you choose the delivery time varies. We can guaranty the dispatch time but the delivery date depends on the shipping method you choose. Telematica is not responsible for a possible delay on delivery. You can trace the status of your order via https://trace.telemati.ca by using your transaction ID or with the tracking number provided via the postal service website.

SHIPPING FEES

Shipping fees are determined by the merchandise total of the order and the selected carrier service.  Shipping charges vary depending on the package size, weight, destination and shipping method.

International Shipping: Rates are calculated based on a number of factors, including desired service level, the weight of the item, and the cost of shipping and handling to the destination country/region.

LIMITED PRODUCT WARRANTY

Telematica warrants all products against defects in material or workmanship for a period of two year from the original date of purchase of the product by a consumer (the “Warranty Period”). Telematica does not warrant, and is not responsible for, any product that was not purchased thru Telematica official sale network or directly. If a material or workmanship defect arises with regard to any product, and a valid claim is received within the Warranty Period, Telematica will (1) repair the product using new or refurbished parts or (2) replace the product with a new or refurbished product. For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specifications. In the event of a defect, these are your exclusive remedies.

Exclusions and Limitations

Except for the limited warranty expressly set forth above or to the extent restricted or prohibited by applicable law, Telematica expressly disclaims any and all other warranties express or implied, including any warranty of quality, merchantability, or fitness for a particular purpose, and you specifically agree that Telematica shall not be liable for any special, incidental, indirect, punitive, or consequential damages for breach of any warranty of any type on any product. In addition to and without limiting the generality of the foregoing disclaimers, the limited warranty does not, under any circumstances, cover the replacement or cost of any electronic device or personal property inside or outside of the product.

For end users who are covered by an applicable consumer protection law or regulation in their country of purchase or residence, the benefits to the end user under this limited warranty are in addition to other rights and remedies of the end user under such laws or regulations. Such benefits may include additional warranties or rights relating to the performance of this product and remedies applicable in the event of a defect. This limited warranty will be interpreted under the laws or regulations that apply to the end user in any state, province or country and any provision of this limited warranty that conflicts with any such end user rights or benefits is not applicable to end users covered by such law or regulation, so the exclusions and limitations set out in this limited warranty may not apply, or may not fully apply, to you.

Sole and Exclusive Remedy

Your sole and exclusive remedy for any breach by Telematica of this Limited Warranty, and Telematica's sole and entire liability for such breach, is, at Telematica's option, to repair or replace the defective product or, if the warranty claim is submitted during the first thirty (30) calendar days of the Warranty Period, refund the purchase price of the defective product. Repair or replacement of the applicable product (including parts and labor as well as re-shipping costs) shall be made at Telematica's expense. Telematica reserves the right to send you a replacement product that is the same or of a similar style to the product you returned under the Limited Warranty or a substitute equivalent to your original Product that may not be of like kind (depending on availability). Replacement products will be furnished only on an exchange basis. Replacement or repaired products are warranted as above only for the remainder of the original applicable Warranty Period.

Obtaining Warranty Service

If you wish to make a claim under this Limited Warranty with respect to a product, please log on to https://ticket.telemati.ca , and ask for an RMA. All of the above information is required before a warranty claim will be accepted. Once Company validates your claim, we will issue you an RMA number and shipping information from sales(at)telematica.gr .

Please note that Telematica cannot accept returned products in packages without an RMA number. Your RMA number must be clearly marked on the outside of the package containing your returned product. Returning a product without an RMA number waives all of Telematica’s responsibilities under the limited warranty, even if proof of delivery is available, due to our inability to match your purchase with the returned product – so, if you send us a package without the RMA number clearly marked on the outside of the package, you understand and acknowledge that you will lose both the product(s) in the package as well as any applicable remedy you would have received under the limited warranty.

Warranty Disclaimers

Except as expressly set forth above in this limited product warranty section, each product is provided solely on an "as is" basis and Telematica makes no other warranties of any kind. To the maximum extent permitted by applicable law, Telematica specifically disclaims and excludes any and all other warranties, whether express, implied or statutory, including, without limitation, any implied warranties of non-infringement, quiet enjoyment, merchantability or fitness for a particular purpose. If such disclaimer of any implied warranty is not permitted by law, the duration of any such implied warranty is limited to the duration of the warranty period of the limited warranty as set forth above. Some jurisdictions do not allow the exclusion of implied warranties or limitations on how long an implied warranty may last, so such limitations or exclusions may not apply to you. If applicable law specifies a minimum warranty period that is longer than the warranty period set forth in the limited warranty, then the warranty period for products subject to such applicable law shall be conformed to the minimum period so required. This warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction.

Governing Law

Click here to view the governing law .

GENERAL INFORMATION

Our goal is to ensure your complete satisfaction but due to the nature of our products, it is common that the customer's expectations might not fulfill because of the lack of the physical contact with the purchased item or due to technical specifications. If, for whatever reason, you are dissatisfied with your purchase, you can return it to Telematica within 30 days of purchase date subject to conditions below. All items should be returned with a valid Telematica RMA number that you must ask prior to the shipping of the product. So, before you decide to return an item please contact us on (+44) 208 638 0906 , email us at Telematica Contact Email or fill out the enclosed form to begin the return process.

RETURN OF NON-DEFECTIVE PRODUCTS

We would like our customers to feel more secure when buying online. Thus, we offer the option to our customers to return even non defective products. Especially, for the 30 first calendar days from the date you received your order, the customer may return the product for exchange or refund.

The returned product should be in the same condition in which it was delivered. Specifically, the item should not have been unpacked (apart from trying it of course), scratched, broken or painted. Also the item must have its original box. The customer must bare the delivery cost of the return of the product/order. The return of a non-defective product can only be done once.

If a similar product is not available,the amount of the purchase of the product is credited to the client. This credit balance can be used in any new order for the customer wishes. The customer may request a refund for the amount credited. All claims do not include delivery costs (to and from the client).

RETURN OF DEFECTIVE PRODUCT FOR WARRANTY

Telematica will repair or replace a defective product within the first two years from the date you purchased your product for free. The shipping fees for returning the item are paid by the customer and the cost for resending the item back to the customer is paid by Telematica. In case the product is out of the warranty period Telematica charges inspection fees 45 €.

ORDER CANCELLATION

In case you want to cancel your order, please keep in mind that the cancellation will be accepted within 2 hour of the order completion. Beyond that point no cancellation will be accepted.

REFUNDS & CREDITS

Refunds on returned items will be issued in the same payment form as tendered at the time of purchase. Once we receive and inspect the product, we will credit your account. Please allow 5-7 days for a credit to appear on your account. If payment was made by check, the refund check will not be issued before ~10 business days after the date of purchase. Unfortunately we cannot refund duties, taxes or shipping charges. Purchases that were processed with currency other than € will be refunded with the current exchange rate. If you haven’t received your refund yet, please contact your credit card company, it may take some time before your refund shows in your account. There is often some processing time before a refund is shown up.

RESTOCK OPTION

Telematica offers “restock option” to the clients who have purchased the product more than 30 days ago and they are not satisfied with it. Please refer to our customer support team for more information.

Notes

  • Did you forget your RMA Number or did you ship the item back to us without it? There is nothing to worry about. Please contact us and tell us about your case. This will not affect the warranty of the product or the refund.
  • Items that cover on warranty will be send back to manufacturer for inspection and replacement. The replacement time is up to the manufacturer.
  • The Return procedure of a product can be monitored by our website https://trace.telemati.ca .
  • If a product is not complying with this return policy document, it would be written on its article clearly.

Pci compliance

CLICK HERE TO VIEW LAST SCAN INFORMATION

Ecommerce security is a primary focus for Telematica. In order to guarantee this, we are proud to be fully PCI DSS compliant. In a growing effort to preserve the integrity of personal information, the PCI Security Standards Council has put forth a series of regulations online business must follow to ensure the security of online shopping. Telematica has met and surpassed all standards outlined by the PCI Security Standards council with flying colors – we have proven our security management, security policies, network architecture, and software design are protected and free of any vulnerabilities that may hinder your online sales.

What is PCI Compliance?

The Payment Card Industry Data Security Standard (PCI DSS) is a widely accepted set of policies and procedures intended to optimize the security of credit, debit and cash card transactions and protect cardholders against misuse of their personal information. The PCI DSS was created jointly in 2004 by four major credit-card companies: Visa, MasterCard, Discover and American Express.

The PCI DSS specifies and elaborates on six major objectives.

First, a secure network must be maintained in which transactions can be conducted. This requirement involves the use of firewalls that are robust enough to be effective without causing undue inconvenience to cardholders or vendors. Specialized firewalls are available for wireless LANs, which are highly vulnerable to eavesdropping and attacks by malicious hackers. In addition, authentication data such as personal identification numbers (PINs) and passwords must not involve defaults supplied by the vendors. Customers should be able to conveniently and frequently change such data.

Second, cardholder information must be protected wherever it is stored. Repositories with vital data such as dates of birth, mothers' maiden names, Social Security numbers, phone numbers and mailing addresses should be secure against hacking. When cardholder data is transmitted through public networks, that data must be encrypted in an effective way. Digital encryption is important in all forms of credit-card transactions, but particularly in e-commerce conducted on the Internet.

Third, systems should be protected against the activities of malicious hackers by using frequently updated anti-virus software, anti-spyware programs, and other anti-malware solutions. All applications should be free of bugs and vulnerabilities that might open the door to exploits in which cardholder data could be stolen or altered. Patches offered by software and operating system (OS) vendors should be regularly installed to ensure the highest possible level of vulnerability management.

Fourth, access to system information and operations should be restricted and controlled. Cardholders should not have to provide information to businesses unless those businesses must know that information to protect themselves and effectively carry out a transaction. Every person who uses a computer in the system must be assigned a unique and confidential identification name or number. Cardholder data should be protected physically as well as electronically. Examples include the use of document shredders, avoidance of unnecessary paper document duplication, and locks and chains on dumpsters to discourage criminals who would otherwise rummage through the trash.

Fifth, networks must be constantly monitored and regularly tested to ensure that all security measures and processes are in place, are functioning properly, and are kept up-do-date. For example, anti-virus and anti-spyware programs should be provided with the latest definitions and signatures. These programs should scan all exchanged data, all applications, all random-access memory (RAM) and all storage media frequently if not continuously.

Sixth, a formal information security policy must be defined, maintained, and followed at all times and by all participating entities. Enforcement measures such as audits and penalties for non-compliance may be necessary.

Telematica Inc. is extremely proud to announce that we have achieved ISO 9001:2008 and ISO 27001:2013 certifications from DQS Holding GmbH.

By becoming ISO 9001 certified, we demonstrated that we are truly invested in understanding our clients needs and working with them to deliver high quality solutions, whilst continuously reviewing and improving the way we work. ISO9001 evaluated whether our Quality Management System is appropriate and effective, while forcing us to identify and implement improvements. Continuous improvement assures our customers benefit by receiving products/services that meet their requirement, and that we deliver consistent performance.

Acquiring ISO 27001 certification , we proved our ability to protect critical and sensitive information, provide a systematic, risk-based approach to information security and compliance, and comprehensively comply with the global ISMS security standard. ISO 27001 certification covers human resources security, asset management, physical and environmental security, incident management, access control, information security organization, network security, operating system, application control and regulatory compliance.

The ISMS ISO 27001 certification is important both for Telematica's internal information security and controls as well as illustrating to customers that Telematica holds itself to an elite standard under which all contract performance will be accomplished. The certification covers all the Telematica procedures and has been integrated into Telematica existing Quality Management System which was already ISO 9001 externally certified.

What is ISO 9001?

ISO 9001 is one of the standards within the range of ISO 9000 standards.ISO 9001: 2008 standards replaced the previous ISO 9001: 2000 and its objective is to provide quality management systems that will be of real benefit to your organisation to help manage your business effectively and put in place best practice methodology.

The standard covers all aspects of an organisation's activities, including identifying its key processes, defining roles and responsibilities, policies and objectives, documentation requirements, the importance of understanding and meeting customer requirements, communication, resource requirements, training, product and process planning, design processes, purchasing, production and service, monitoring and measurement of products and processes, customer satisfaction, internal audit, management review, and improvement processes.

What is ISO 27001?

ISO 27001 is an international standard published by the International Standardization Organization (ISO), and it describes how to manage information security in a company. The latest revision of this standard was published in 2013, and its full title is now ISO/IEC 27001:2013

ISO 27001 can be implemented in any kind of organization, profit or non-profit, private or state-owned, small or large. It was written by the world’s best experts in the field of information security and provides methodology for the implementation of information security management in an organization. It also enables companies to become certified, which means that an independent certification body has confirmed that an organization has implemented information security compliant with ISO 27001.

How does ISO 27001 work?

The focus of ISO 27001 is to protect the confidentiality, integrity and availability of the information in a company. This is done by finding out what potential problems could happen to the information (i.e., risk assessment), and then defining what needs to be done to prevent such problems from happening (i.e., risk mitigation or risk treatment). Therefore, the main philosophy of ISO 27001 is based on managing risks: find out where the risks are, and then systematically treat them.

The safeguards (or controls) that are to be implemented are usually in the form of policies, procedures and technical implementation (e.g., software and equipment). However, in most cases companies already have all the hardware and software in place, but they are using them in an unsecure way – therefore, the majority of the ISO 27001 implementation will be about setting the organizational rules (i.e., writing documents) that are needed in order to prevent security breaches. Since such implementation will require multiple policies, procedures, people, assets, etc. to be managed, ISO 27001 has described how to fit all these elements together in the information security management system (ISMS). So, managing information security is not only about IT security (i.e., firewalls, anti-virus, etc.) – it is also about managing processes, legal protection, managing human resources, physical protection, etc.

About DQS

DQS Holding GmbH based in Frankfurt am Main is the holding company of the worldwide DQS-UL Group. The group provides assessments and certifications of management systems and processes of any type.

Visit DQS

CONTACT US

+44 208 638 0906 Call Center
WORKING HOURS
Monday - Friday9:00 - 20:00
Saturday - SundayClosed

Visit our offices

12 Gateway mews - N11 2UT - London - United Kingdom
Office Location

The Company

Telematica was founded in 2006 by a team of engineers whose sole goal was bringing high-quality shopping experience to any enthusiast who visits us online.

Our team comprises of talented and committed engineers with wide technological expertise and experience in the motorsports industry. We hope our friendly and fair customer approach differentiates us from the competition out there. For us, the customer always comes first and we always do our best to make sure that each customer has an experience which is exemplary of our brand. Our principles of offering top products, quality, service and rapid availability kept us going all these years.

Visit our warehouse

Ethnomartyron 40 - 26 333 - Patras - Greece
Office Location
Telematica profile