These amplifiers are truly amazing, capable of delivering up to 68W, with extremely low THD and sporting many advanced features such as under/over voltage protection, thermal protection etc.
There's provision for a 0.1 ohm resistor for connecting boards in parallel.
Size: W 70mm H 35mm.
What you get:
1x High quality circuit board, designed in the UK.
1x LM3886 amplifier IC.
1x 1uF metallised polyester capacitor.
3x 100uF 50V electrolytic capacitor.
1x 22uF 50V electrolytic capacitor.
3x 22k 1% metal film resistor.
2x 1k 1% metal film resistor.
1x 3-way 5mm terminal block.
2x 2-way 5mm terminal block.
You will need to attach a heat sink as the LM3886 is a powerful chip and dissipates a lot of heat.
You will also need a way of powering the amp up. Check our other listings we can help you with that.
You will need access to a soldering iron and moderate soldering skills.
Here's all the LM3886 data you need on Texas Instrument's website.
IMPORTANT - INSTALLATION BY QUALIFIED PERSONS ONLY AS MAINS ELECTRICITY IS INVOLVED.
Check my store for 2 and 3 way active filters, LM4780 PCBs, audio power supplies plus lots more.