HONDA CIVIC TYPE R GENUINE MOCAL 13 ROW OIL COOLER KIT

SUITABLE FOR:

HONDA CIVIC TYPE R

 

 OIL COOLER KITS AVAILABLE FOR MOST MAKES & MODELS - PLEASE SEE MY SHOP ITEMS 

This is a brand new MOCAL 13row oil cooler kit for Honda CIVIC TYPE R.

 

KIT INCLUDES:

13 row x 235mm oil cooler

2x 1/2bsp hose and fittings

Oil filter sandwich plate

Universal mounting brackets

8x nuts/bolts

Matrix dimensions: 235x100mm

 

Rough guide: a 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (FOR TRACK USE) given an installation with good airflow, after this a larger cooler will be required.

For road use a 13 row cooler is usually fine for up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required

16row cooler: £6.99extra

19row cooler: £18.99extra  

 Exact cooler size required depends upon: the type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump.

If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling.

The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still.

Roughly speaking you need about 10psi of oil pressure per 1000rpm.

e.g. 7000rpm requires 70psi oil pressure

If the pump cannot meet this demand when the oil is hot/thin engine failure will result - usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block!

This is especially important on part worn engines - a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand.  On a new or part worn engine if the oil pressure is maintained, the engine isnt over revved or over heated there is no reason for failure.

For track, competition or high preformance use a rough target temperature for the oil is around 100degrees C. Over 100C the oil thins out rapidly and therefore drops the pressure.

TURBO SYSTEMS WILL ROCKET THE OIL TEMPERATURE.

 

For cold/wet weather over cooling of the oil can be avoided by the addition of an oil thermostat built into the sandwich plate (£19.99extra)

This oil cooler kit is designed for motorsport use. NO instuctions are included. (some fitting tips & tightening torques are included)

 

For 16/19row cooler & thermostat upgrades please purchase the item & request total BEFORE payment is made. An amended invoice will then be sent.

 

PLEASE VIEW MY SHOP ITEMS

 

SAME DAY/NEXT WORKING DAY DESPATCH

We will endeavour to despatch most items purchased before 3pm the same day(may not be possible on all items following bank holidays/busy periods etc)

If any items cannot be despatched within 1 working day we will contact you.(the despatch date will be printed on the parcel address label)

PLEASE NOTE: we cannot be held responsible for delivery companies/couriers that do not deliver on time.(due to address queries/bad weather/locational errors etc)

During the feedback process you will be asked to rate us on Despatch time NOT Delivery time.

 

WORLDWIDE SHIPPING

Europe - From £2.99

Rest of World - £29.99

 

PLEASE NOTE ITEM & POSTAGE PRICES INCLUDE VAT. (items cannot be sold or posted without VAT)

POSTAGE PRICES ALSO INCLUDE PACKING/MATERIALS & OTHER COSTS(franking, mail collection service etc)

Questions - we are happy to do our best to answer sensible, genuine questions during our normal office hours(mon-fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personnal experience of fitting/using all our products. Products only fit models stated(if products fit other models its in our favour to say so!). Products listed as UNIVERSAL FITMENT are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please have an understanding of what you are buying before purchase. Please allow 24h for us to respond to your question. If more than 24hours has elapsed please contact us again as the email may have been incorrectly caught by our spam filter.

Feedback - Please be reasonnable - we do not like to give or receive anything but positive feedback. if you have a problem with your order please contact us and give us the opportunity to rectify the situation(mistakes do happen, not offen but they do happen!). Please note we state a despatch date on all parcels sent but we cannot be held resonsible for Royal Mail/couriers actions, over which we have no control. Please also note the despatch(within 3 working days) and delivery allowance(7 working days) times stated on the listing. Please consider the packing time, materials and VAT aspect of postage costs. Please do not assume next day delivery as we do not offer this service without prior arrangment. If we deem unfair feedback has been left the person concerned will be reported to ebay and barred from our shop. Most of our products are NOT designed for diy fitting and in some cases instructions are not included - we state this when applicable. We do not prioritise feedbacks, due the time consuming nature of feedbacks we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. Above all we want you to have a positive buying experience and purchase from us again.

PIC IS A SAMPLE KIT - NOT THE ACTUAL KIT