Focusrite RED 4Pre Audio Interface with Thunderbolt 2, Pro Tools, Dante Connections New
Warehouse Direct To You!
Fast USA Shipping!!! Focusrite RED 4Pre - Audio Interface with Thunderbolt 2, Pro Tools, Dante Connections Focusrite's 58-in/64-out Red 4Pre includes Thunderbolt 2 connectivity for our lowest round-trip latency, in whatever DAW you use, enabling you to track and overdub with your preferred plug-ins and effects in real time, simplifying your workflow. Drop the Red 4Pre immediately, directly and seamlessly into any Pro Tools | HD system, or use it with existing Avid® interfaces, thanks to its twin DigiLink™ connectors. Dual Thunderbolt 2 ports allow daisy-chaining of additional components such as hard drives and displays. Plus the Red 4Pre is network audio enabled right out of the box, with dual Ethernet ports for Dante audio-over-IP networking, letting you expand your recording capability over Ethernet for up to 64 additional channels anywhere on your network, with low latency – and lower cost. Additional Red or other Dante-compatible components can be connected to the Ethernet ports of the Red 4Pre to provide additional channels irrespective of the interface used to drive the Red 4Pre. Connections Mic Inputs: 4 x XLR Instrument Inputs: 2 x 1/4" / 6.35 mm, unbalanced Line Inputs (1-8): DB25 connector Line Outputs (3-10): DB25 connector Monitor Outputs: 2 x 1/4" / 6.35 mm, balanced Headphone Outputs: 2 x 1/4" / 6.35 mm, stereo S/PDIF I/O: 2 x RCA ADAT Optical Input: 2 x TOSLINK ports (1-8 and 9-16) ADAT Optical Output 2 x TOSLINK ports (1-8 and 9-16) Avid DigiLink: 2 x Primary port connectors Thunderbolt: 2 x ports Wordclock I/O: 1 x BNC input, 1 x BNC output (75 ohm input termination) Loop Sync I/O: 1 x BNC input, 1 x BNC output Dante: 2 x Ethernet networking ports Power: Standard IEC power input Microphone Inputs Phantom Power: +48 V, switchable per mic input Frequency Response: 20 Hz to 35 kHz, ±0.2 dB Signal to Noise Ratio: 118 dB (A-weighted) Dynamic Range: 118 dB (A-weighted) THD+N: 0.0009% Noise EIN: -129 dBu (A-weighted) Maximum Input Level: +19 dBu Gain Range: 0-63 dB Common Mode Rejection Ratio: > 70 dB at 997 Hz (min. gain) Input Impedance with AIR Mode OFF: 6 kOhms Input Impedance with AIR Mode ON: 2 kOhms Line Inputs Line Inputs 1-4 Frequency Response: 20 Hz to 35 kHz, ±0.2 dB Dynamic Range: 118 dB (A-weighted) THD+N: 0.0009% Maximum Input Level: +27 dBu Gain Range: 0-63 dB Line Inputs 5-8 Frequency Response: 20 Hz to 35 kHz ±0.2 dB Dynamic Range: 118 dB (A-weighted) THD+N: 0.0007% Maximum Input Level: +26 dBu Gain Range: Fixed Instrument Inputs Frequency Response: 20 Hz to 35 kHz, ±0.2 dB Dynamic Range: 117 dB (A-weighted) THD+N: 0.0015% Maximum Input Level: +15 dBu Gain Range: 0-63 dB Monitor Outputs Frequency Response: 20 Hz to 35 kHz, ±0.25 dB Dynamic Range: 120 dB (A-weighted) Maximum Output Level (0 dBFS): +18 dBu THD+N: 0.006% Line Outputs Frequency Response: 20 Hz to 35 kHz, ±0.25 dB Dynamic Range (Line Outputs): 121 dB (A-weighted) Maximum Output Level (0 dBFS): +18 dBu THD+N: 0.0009% Headphone Outputs Dynamic Range: 115 dB THD+N: 0.01% Maximum Output Level: +16 dBu Sampling Rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz Mac System Requirements OSX 10.9 Mavericks, 10.10 Yosemite, 10.11 El Capitan 1 x Thunderbolt port or Thunderbolt 2 port Internet connection for downloading and installing driver. Power Requirements Input Voltage Range: 100-240 VAC, 50/60 Hz Max. Power Consumption: 35 W Dimensions (H x W x D) 1.7 x 19.0 x 13.4" / 44.0 x 483.0 x 340.0 mm Weight 10.1 lb / 4.59 kg
Item Includes:
Focusrite RED 4Pre - Audio Interface with Thunderbolt 2, Pro Tools, Dante Connections Thunderbolt Cable (6.6' / 2.0m) Software Activation Codes IEC Power Cord Limited 1-Year Warranty
|