FULL FEATURE DESCRIPTIONS:

32 Channels

With the PocketWizard Plus III Transceiver's 32 channels (16 standard plus 16 Quad-Zone Triggering channels), finding an open channel is easy. Photographers working in a busy environment, including wedding halls, sports arenas or busy studios, can dial in a channel as simply as pushing a button.

Quad-Zone Triggering

Selective Quad-Zone Triggering keeps you shooting photos, not running back and forth to your lighting or cameras. Without leaving the camera position, you can wirelessly activate or deactivate your remote flashes or cameras in 4 separately controllable zones: A, B, C, or D. This is ideal when using multiple lighting setups or turning remote cameras on and off as needed. The Plus III Transceiver is also the perfect partner for the MultiMAX® radio, which also features 32 channels and four zones.

Auto-Sensing Transceiver Technology

With our patented Auto-Sensing Transceiver technology, the Plus III Transceiver is one smart radio. When set to TxRx, it will instantly and intelligently switch between transmitter and receiver modes as needed for greater flexibility on the job. The Plus III may be set to transmit (Tx) or receive (Rx) only when needed.

Two-Stage Remote Camera Triggering

The Plus III Transceiver is the perfect solution for remote camera triggering. The unique two-stage TEST button on the Plus III works just like the shutter release button on your camera. Press it halfway and your remote camera wakes up to meter and focus. Press TEST all the way to take your photo. When released, your remote camera will return to sleep mode normally; a real battery saver. Using the right cables, you can have a remote camera follow the camera in your hands - half press your hand-held camera's shutter release and the remote camera meters/focuses, full press and both cameras trigger away. This feature requires a receiving Plus III, MultiMAX or FlexTT5, and ACC Pre-Trigger cables.

Auto-Relay Mode

Our Auto-Sensing Transceiver technology lets you trigger a remote camera in sync with remote flashes using only 3 PocketWizard radios: the one in your hands, a Plus III cabled to your remote camera, and the one connected to your remote flash. The Plus III cabled to your remote camera will receive a radio signal and trigger the camera's motor drive, then switch to transmit mode and trigger your PocketWizard-connected remote flashes, all automatically. Start the sequence by simply pressing the TEST button of any PocketWizard Transmitter in your hands. Remote cameras require motor drive cables.

Long Range Capability

Under ideal conditions, The Plus III Transceiver works up to 500 meters (1600 feet). Shooting environments are seldom ideal, so the Plus III incorporates two range extending modes for the challenges of the real world. Use Long Range Mode (LR) to nearly double the effective triggering distance in almost any environment. In very challenging environments or extremely long working ranges, place a Plus III in Repeater Mode (RP) between your transmitter and receiver to repeat the signal and complete the connection. These modes take a little extra time to do their jobs, so maximum X-sync may be reduced when firing remote flashes in LR or RP modes.

High Speed Receive

Normally, the Plus III is capable of triggering lights or cameras at a sustained rate of up to 12 frames per second (FPS), a standard for PocketWizard radios. Set the Plus III to High Speed Receive Mode (HSR) and trigger at rates up to 14.5 FPS, beyond the capability of most of today's cameras. This mode can also help high FPS triggering compatibility for any flash.

Simple User Interface

The Plus III has an intuitive user interface where all channels, zones and modes can be easily engaged via a soft-touch keypad, and displayed on an easy-to-read backlit 2.5cm (1") LCD display. When you're working in dark environments, simply press any key other than TEST to Illuminate the LCD.

Sync Speed

Ultra-fast microprocessors allow for reliable sync speeds of 1/250 for focal plane shutters and 1/500 for leaf shutters.

Easily Connected

On your camera, the Plus III slides into the hot shoe with no cables required. For your remotes, it features one do-it-all sync port. The industry-standard miniphone (3.5mm or 1/8") connector is much more reliable than a PC connection, so each Plus III comes complete with a miniphone-to-miniphone cable, and a miniphone-to-phono (1/4" or 6.3mm) adapter for triggering the majority of modern flashes. And it even comes with a miniphone to locking PC cable for triggering some remote speedlights, or for using your Plus III on-camera when you can't put it in a hot shoe. Other miniphone connector cables are available for major brands of lighting equipment in a variety of lengths. Dedicated remote camera triggering cables are also available for popular camera systems.

Very Compatible

The Plus III is compatible with all PocketWizard transmitters and receivers of the same frequency* including PocketWizard-enabled photo gear from Profoto, Dynalite, Norman, Photogenic and Sekonic light meters. The PocketWizard wireless system allows for total flexibility with whatever lights or cameras you may be working with. (*FCC and CE PocketWizard radios work on different frequencies)

Sleek New Design

The Plus III features a durable, side profile design with an unobtrusive, internal antenna minimizing visual obstruction between you and your subject. By utilizing an internal antenna, there's no chance to kink or break it when on location. The total height of the transceiver and antenna is less than 5.25 inches, and it weighs only 4 ounces, including batteries.

Common Power

Two AA (IEC:LR6) batteries run the Plus III for about 50 hours. External power can be supplied to the standard Mini-B USB port. The captive battery door won't get lost.

Up to Date

The Plus III is firmware-upgradable. Simply connect it to a PC or Mac and download and install the latest firmware with the PocketWizard Utility software.

Compatible for use with industry standard hot shoes, PC sync terminals, etc.  Safe 3 volts sync voltage for modern digital camera systems.

Compatible with most flashes and triggering circuits.  Can handle up to 300 volts.  See our cables and adapters section for appropriate connecting cables.

2-Stage triggering works as expected for most modern cameras when using an ACC cable.  A few exceptions are detailed below:

Plus III Operational Considerations:

1) Nikon Cameras with MC-DC2 ports do not provide half-press, or full press output through the MC-DC2 port.  This means that any camera using an N-MCDC2-ACC cable won't be able to provide the "half press your remote camera from the camera in your hand" operation when using the shutter release button.  This affects the following cameras:

D90
D7000
D5100
D5000
D3100

Note: This does NOT impact half-press or full-press INPUT to the camera, as this works just fine with the N-MCDC2-ACC cable on a remote camera.2) Nikon Camera's with a MC-DC1 port using an NM4-ACC cable does not provide "half-press" output, but it does provide "full-press" output.  This affects the following cameras:D70s
D80

3) Compatible with flashes up to 300 Volts.

Money Back Guarantee:

If you are not completely satisfied with your purchase,  we will be glad to refund or credit your purchase price, less any shipping  charges and a 20% restocking fee. Merchandise must be returned within 14 days  from the day you receive it. However, you have to notify us by e-mail within 14  days that the item is being returned and the reason for the return. No returns  will be accepted after 14 days.

Return Conditions:
 
  Returned merchandise must be in original condition and  include all factory packed accessories and paperwork (e.g. battery, charger,  cords, straps, unmarked warranty card, manuals, etc.), in the original  manufacturer box and packaging with UPC, barcode, and serial number intact.
  Incomplete returns will receive a reduced credit,  reflecting any missing peripherals.
  The product serial number must match the serial number in  our database. VL Camera maintains serial number tracking.
  Return merchandise must be double-boxed with no writing  on the manufacturer's box. Your Return Authorization number should be  prominently displayed on the outside of the shipping box.

How to Return?      

Please contact us at (718) 544-5335 for a return  authorization number (RMA number).
  Return to:
  VL Camera Services
  RMA Number
  116-55 Queens Blvd
  201A
  Forest Hills, NY 11375

Returned merchandise that is lost or damaged during  transit is solely the shipper's responsibility. It is important to save the  tracking information and to properly insure all merchandise being returned to
  VL Camera Services.

Refunds:        

Refunds for returns are applied to the payment method  used at the time of purchase. Once we receive and inspect the product we will  credit your account. Please allow 5-7 days for a credit to appear on your  account.
 
  Defective items:  

An item that was discovered to be defective upon receipt  can be replaced or returned for a full refund.
  Damaged or Missing items:        
  Claims for items damaged in transit or missing items must  be received within two business days of receipt of the shipment.

Replacement:        
  We will send a product replacement after the authorized  return has completed our receiving/inspection process. The replacement will  ship within four business days following the receipt of your return. Please  allow for additional processing time after holidays.

Although it is our goal to ship a replacement as quickly  as possible, a replacement cannot be shipped before we receive and inspect the  return. To receive a replacement more quickly, you may place a new order for  the same item (shipping not included) and we will issue a refund for the full  value of the returned product (including shipping) upon completion of our  return process.