This is the updated long range version of the black pearl monitor. The long range version uses better filtering techniques to improve the range over the standard black pearl monitor. You can easily see what is going on thanks to a high resolution 7 inch (1024 x 600 resolution) FPV Monitor with a built in 5.8Ghz Diversity Receiver. This Black Pearl monitor is ideal for those who want FPV system that is quick to setup and easy to transport. Because the 5.8Ghz Diversity receiver is built in you don't need to worry about lots of wires or batteries to power each individual part. You can still use this FPV monitor/receiver with some goggles via the video outputs. The built in 5.8Ghz Diversity receiver will always ensure you are getting the best video signal and also allows you to use two different antennas if you want. The other great feature is the integrated battery so you don't need to carry extra batteires just for your monitor.
This monitor is compatible with the 5.8Ghz transmitters we sell. But if you are unsure, please make sure that the channel frequencies on your transmitter will match a channel on this receiver, see table below. This monitor is also compatible with Fatshark gear.
Black Pearl MONITOR FEATURES
- High sensitivity diversity receivers for the best possible reception
- Anti-reflective matte screen makes this monitor easier to use on bright days
- Inlcudes a built in battery
- Supports DNR
- High resolution screen (1024x600px) that is very bright (300cd/m^2)
- Includes a rigid plastic sun hood
- No blue screen
- Supports Airwave and NextWave transmitters and many others on 5.8Ghz due to the 32Channel diversity receiver.
- Supports image rotation.
- HDMI 1.3 digital input port
SPECIFICATIONS
Screen
- Screen size:7”
- Resolution: 1024 x 600
- Brightness: 300cd/m2
- Contrast: 700:1
Receiver
- Frequency : ISM 5.8Ghz
- RX sensitivity: -90dBM
- Diversity: Yes
- Video Standard: NSTC/PAL (automatic switching)
- Video Output Level: 1.0Vp-p, 75ohm
- Audio Output Level: 1.0Vp-p, 10Kohm
Audio/Video Ports
- RX1 AV Out: Video, mono audio output
- RX2 AV Out: Video, mono audio output
- AV In: Video, stereo audio output
- HDMI input
- Built in Speaker X2: 8ohm, 1W
Power Supply
- DC In / Out: 7 ~28V (suggested to use 3S lipo battery (1000mah) with JST connector
Physical
- Size: 183x126x19.5mm
- Temperature: -10
FREQUENCIES
CONTENTS
- 1 x monitor
- 1 x light shield
- 2 x 5.8G 2db antennas
- 2 x AV out cables
- 1 x Power cable with JS connector
- 1x Integrated Battery
- 12V 2 pin power supply