This is a Brand New Highest Quality 13 ITEM Set of standard Industrial Sewing Machine Parts for the JUKI Industrial Drop Feed Single Needle Machines.
These parts will fit CONSEW / JUKI / SINGER Style INDUSTRIAL Single Needle DROP FEED Sewing Machines including:
ARTISAN BROTHER CONSEW COLUMBIA JUKI MITSUBISHI NAKAJIMA REX SEIKO SINGER SIRUBA TOYOTA
**** TOP ROW ****
1 EACH: #TC101 This is our most popular thread nipper. The nipper is plastic with steel blades. It has a ring for easy positioning in the palm of your hand.
1 EACH: #40322SH This is the MOST popular Zipper Foot used today. It is very narrow and split in the center so that you can get very close to EITHER side of a zipper or just sew close to Buckles, D Rings, Snaps, Grommets, Etc.
1 EACH: #142058N This foot is similar to a regular presser foot but narrower for finer work on more delicate fabrics. It can be used to set zippers.
1 EACH: #24983 This is the Standard Seaming Foot that is installed on new Single Needle Machines at the factory.
1 EACH: #149057 This is the Standard Feeder that is installed on all new machines at the factory. This feeder is suitable for all types of standard wash and wear apparel up to medium heavy applications.
1 EACH: #272153 This is a fine tooth feeder that is used on delicate fabrics. Lingerie and other fragile fabrics will often show tooth marks from a regular feeder. This feeder will fit into the Needle Plate included in this set.
1 EACH: #147150LGW This is the Standard Needle Plate that is installed on new machines at the factory. This Needle Plate will fit both feeders in this set.
**** BOBBINS ****
5 EACH: #272152 These are ALUMINUM Bobbins with no holes. Aluminum Bobbins are lighter than Steel Bobbins and are usually very expensive compared to steel.
5 EACH: #270010 These are Black STEEL Bobbins with holes on both sides. Steel Bobbins are installed into new Industrial Single Needle Machines at the factory.
5 EACH: #270010W These are White/Silver STEEL Bobbins with holes on both sides. Steel Bobbins are installed into new Industrial Single Needle Machines at the factory.
**** TWEEZERS ****
1 EACH: #TWE7 This is a very popular style brand new pair of 7" Tweezers bent at the tips with a positioning pin in the blades.
**** BOBBIN CASES ****
1 EACH: #52237NBL This is a No Back Lash Bobbin Case Assembly for most Singer/Juki/Consew Style Single Needle Machines. There is a built in Anti-Bobbin-Spin spring that prevents the bobbin from spinning when the machine is stopped. This is the standard Bobbin Case installed at the factory. These are "L" size bobbin cases.
1 EACH: #541678NBL This BRAND NEW No Back Lash Bobbin Case has a PIGTAIL Thread Guide and fits Single Needle, Zig Zag, and Embroidery Machines. This Bobbin Case has a very large needle slot to allow for needle flexing and prevents your needles from contacting the Bobbin Cases. This is an "L" size bobbin case.
These Brand New World Class Quality INDUSTRIAL SEWING MACHINE PARTS will fit MOST Industrial Single Needle Machines including:
ARTISAN: 196R 5550N 8500N ZJ-100
BROTHER: B705 B707 B715 B716 B735 B737 B738 B745 B755 B757 B758 B767 B781
COLUMBIA: N430
CONSEW: 30 98 99 102 103 105 210 217 218 219 220 230 290 310 2230 7360R-1
CUTSEW: 777 787
CUTLINE: C220
FEIYUE: FY8500 FY8700
GEMSY: 8700
JUKI: DDL-127 DDL-227 DDL-500 DDL-501 DDL-552 DDL-553 DDL-555 DDL-5550 DDL-5600 DDL-8300 DDL-8500 DDL-8700 DDL-9000
MITSUBISHI: DB-120 DB-121 DB-122 DB-126 DB-130 DB-170 DB-189 DB-199 LS2-130 LS2-150 LS2-180 LS2-190 LS2-1130
NECCHI: SUPERNOVA JULIA
RELIABLE: MSK-8800 MSK-8550M MSK-8870M
REX: RX8500
RICCAR: RD-102
SINGER: 44 95 96 120U 121C 121D 188K 191D 195K 196K 241 251 281 331K 366K 400W 402W 451K 491D 591D 600W 660A 691D 770D 771D 2191 2491D
SUNSEW: GC1130 GC5550 GC6180 GC8500 GC-B735 GC-C111
SUNSTAR: KM-123A KM-123B KM-137A KM-137B KM-146BL KM-250
TACSEW: 5550 T8700
TAIKO: TK-505 TK-510
TOYOTA: AD156 AD157 AD338 D146 D147 D347 D348 D1422-42 D2432
TYPICAL: GC6-1-D3E2 GC6150B GC6150H GC6150M GC6160D3 GC6195M
UNICORN: LS2-H520 LS2-H530 LS2-H5100 LS2-H5200 LS2-H5300
YAMATA: FY8500 FY8700
ZOJE: ZJ15-1 ZJ80-1 ZJ90-1 ZJ999-1 ZJ999-5 ZJ5580 ZJ5580-D3 ZJ8500-D3 ZJ8500N
It is often necessary to CENTER the Feed Dog Stroke within the feeder slots in the needle plate. This is required if your Feeder is hitting the needle plate in either the front or back during the feeding motion. To make this adjustment loosen either screw #44 or #56 in this image CENTER FEEDER. Loosen either of these screws only enough to allow the feeder to be moved with your fingers slightly from front to back within the needle plate feeder slots. Do NOT loosen so much that there is no feeding motion! Turn the handwheel slowly in the normal direction to make certain that the feeder is centered within the needle plate feeder slots.
Tighten the screw #44 or #56 AFTER you have CENTERED the Feeder.
Also note that screw #58 is used to adjust the HEIGHT of the Feeder. ADJUST FEEDER HEIGHT