Introduction

The QK-W016 series WiFi temperature monitoring remote controller is a versatile device which can be attached to appliances such as domestic freezers, water tanks, refrigerators, industrial chillers, boilers, steamers, warehouse controls, greenhouses, industrial equipment and other systems requiring temperature control. Operators can control remote equipment, heaters, lights, machines or power sockets from anywhere in the World via the Internet.

Three wired thermistor sensors measure temperatures in different zones and QK-W016 energises the corresponding relays according to the measured temperatures. QK-W016 can be fitted in any situation where an object needs to be heated, cooled or both in order to maintain the target temperature range (set within the PC application or the Android APP).

An integrated WiFi module allows the operator to check the temperature log data and manually switch the relays via a WiFi network.

QK-W016 also has an optional RF433 Mhz module which allows the operator to switch RF mains sockets within a range of up to 50 metres.

Features

· Control and store heating/cooling settings for three individual zones via WiFi

· Turn electronic devices ON/OFF from any location via the  Internet

· Monitor environmental temperatures using a local PC and a mobile phone

· Output relays can be triggered manually or tied to specific temperature ranges

· Industrial level design

· Standard 802.11b/g/n WiFi, easily connected into an existing wireless AP

· Applications on Windows platforms (XP, Windows 7, 8, 10) and an Android APP

· Rapid install and setup

· Automotive temperature range (-40°C to +105°C)

· ± 0.5°C temperature tolerance

· Supports both ad hoc and station modes on WiFi

Interface on the module

 

  
 

 

PC main Control Panel

Mobile Phone main Control Panel

The PC application does not support far end control through the Internet. This means that QK-W016 should be connected with the control computer using the same wireless AP (same SSID name). In order to control QK-W016 from any location, operators can access the Internet using Android based terminals, such as mobile phones or tablets. The setup process is similar to that for the Windows application. The main control panel on the Android APP is shown below:

Packing list

In the package, customer will have a QK-W016 remote controller, a 12V 1.0Amp Power plug and three 433MHz RF power sockets. UK, EU or US types of RF power sockets are available, please select the correct item you requested (Power plug type will be same as RF sockets).

Please be noted the defaulty temperatures sensor cables length is 1 meter. 2 metres is available, contact me if you need this. Alternatively, you can also extend it yourself.

UK Type

EU Type

US Type

Download

APP can be download here.

Application note can be download here.

 

For any technical questions regarding this item, please go to Quark-elec website and leave your question on the forum, that's the quickest way to get the reply.