NEW!AudioControl 6XSCROSSOVER 6-Channel Electronic Crossover w/Subwoofer Level Control

The 6XS CROSSOVER is a 6-Channel Electronic Crossover with Subwoofer Level Control. The 6XS CROSSOVER offers 2, 4 or 6 channel inputs. Auto Mode inputs also come standard on the Crossover. The Crossover has a 24dB/octave Linkwitz-Riley crossover type. The Crossover also includes an adjustable Subsonic Filter for speaker control and amplifier protection. It also includes output level controls for more adjustability A 13 volt peak preamp line driver provides a smooth performance. The Switchable ground isolation makes the 6-Channel Electronic Crossover very adjustable. It has a Dash Mount ACR-3 level control included. The Dash Mount ACR-3 level control allows the user to adjust subwoofer and bass levels. The Crossover comes with front high pass, front bandpass, rear high pass, and subwoofer outputs. The Crossover has 1 Preamp Input. The Crossover has 1 Preamp Output. It has a Maximum Input Level of 9.5 Vrms. It has a Maximum Output Level of 7.5 Vrms. The Total Harmonic Distortion is 0.005%. The Frequency Response registers 15 Hz - 20k Hz. It has a Signal to Noise ratio of 115dB at full output. The Crossover has a Current Draw of 150mA. The 6XS CROSSOVER has a 18dB Crossover type. The Crossover Frequency is 90Hz from factory which is user programmable. The Current Draw is 150mA. The recommended Fuse Rating is 1A. The dimensions are as follows: 5.5″W x 4.65″D x 1.15″H It has a weight of 2.0 lbs.

• What's Included:
• Manual
• Power Connector
• 6XS
• Product Highlights:
• line driver
• Automode inputs
• 2, 4 or 6 channel inputs
• Dash Mount ACR-1 Sub-woofer Level Control Included
• front highpass, front bandpass, rear highpass, and sub-
• woofer outputs
• 24 dB/octave Linkwitz-Riley alignment
• remote mounted subwoofer level control
• Programmable Frequency Match (PFM) subsonic filter
• Output level controls
• 13 volt peak preamp
• switchable ground isolation
• Specifications
• Preamp Inputs: 3 (6 channels)
• Remote In Power Supply:
• Total Harmonic Distortion: 0.005%
• Maximum Output Level: 9.5Vrms / 13V peak
• Crossover Frequency: 90 Hz from factory (user programmable)
• Crossover Type: 24dB/octave Linkwitz-Riley
• Input Gain: 12dB (front/rear), 18dB (sub)
• Weight: 2.5lbs (1.13kg)
• High Headroom PWM Current Draw:
• Output Impedance: 150 OHM
• 400mA Recommended Fuse Rating: 2A
• Input Impedance: 20kOHM
• Preamp Outputs: 4 (8 channels)
• Frequency Response: 10Hz-100kHz ±1dB
• Signal to Noise: 110dB
• Dimensions: 5.5W x 4.65D x 1.15H