THIS IS A KIT! However Most of the Work is complete.

Lancia delta integrale EVO Custom Headlights

Mk2 Alloy Frames, Built.

8v / 16v + Japan EVO + all delta HF Headlights


2x Alloy Mk2 back plate

2x Motor removal plate

2x Plastic Trim EVO type.

2x Fisheye lamps "Black"

2x Hi beam Lamps "Black"

2x Pilot lamp holders

2x Wiring for all lamps and pilot.. including 4x rubber caps.

4x Alloy headlight blanks for custom use. aka fake lights.

2x Parts box with misc Alloy and Stainless parts,

inc

4x 5mm Alloy Red Nyloc Nuts - fitted
8x 6mm Stainless Bolts
6x 6mm Stainless Mounting Bolts - fitted with posts.
6x 6mm Stainless Mounting flange nuts. fitted
8x 6mm Stainless flange Post Bolts - fitted
Many 4mm Rivnuts - some fitted
Many 6mm Rivnuts - fitted
10x 5mm Rivnuts - some fitted
Many 4mm Nyloc nuts
12x 4mm Dome nuts
Many Stainless Washers
Many Rubber mountings, washers etc
Stainless Rod lengths, and so on..

This is not a complete list...

Some of the Rivnuting 4mm is completed making the build more easy.
Some of the rod is cut ready,
 all The Alloy Tubing is precut revetted and made in to trim stand off posts ready..

Depending on how you want to complete the kit,
you will need spanners, files, Rivnut gun and basic workshop tools to complete.

TO BUILD as photos or How you like.
Some photos and PDFs are included to copy
or make your own ideas.

Designed use or other customization
This assembly is the 2nd generation cut, set produced aka Mk2 EVO, one of only 2 remaining for sale.
and the Last kit I can offer as this build.

Everything is included ready to build as photos, will mount in 8v / 16v car without modification to mounting frames.
setup for 8v /16v mount points. But can easy move this adjust for EVO in 1 min.
 
Both EVO and 8v 16v car body mount points are pre cut.
The Lamps are all new, Hi beams have a black cross type when lit. And blacked out Fisheye style lamps to match.
The black Plastic Trims are included and also new and aftermarket, the front Trim screws x8 are Stainless Allen bolts other hardware again Stainless A2 or Alloy or custom Plastics.. Kit setup for 4mm custom mounting, however all Lamps come with some 5mm standard like mounting hardware, you can use it if you want after customisation, you can also use Electronic lamp adjustment on Fisheye if you have the motors already. Rare..

This item will not be repeated. End of line. facebook.com/lanciaintegrale


 

*

World wide Airmail / Shipping from UK
Support | +447865399124  Contact:
lancia-headlights.tk


Custom Alloy Headlight Back plates.
Aluminium 5083 "O" renowned - outstanding performance in intense environments.
highly resistant to corrosion in both seawater and industrial chemical environments.