DSC26103-ZWUS Aeon Labs Micro Energy Switch G2(Second Edition) - Pack of 3
Caution : This is NOT 3-way switch regardless
manual shows on diagram. Any attempt to connect
line power to low voltage terminal will fire the switch.
The Aeotec Micro Switch G2 is a low-cost Z-Wave appliance module specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches.
The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.
It also is a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node.
By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary "listening" Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
2nd Edition. The new Micro Switch is one of Aeotec's 2nd edition products. Each has been rebuilt from the inside out, reducing their size while embedding into them the latest Z-Wave firmware and commands. That empowers them with everything from enhanced stability to Z-Wave's Explorer Frames.
This micro switch WILL NOT work in a 3-way configuration - it can only be installed in single-pole applications
Use your existing switches. Just because you want enhance your switches, doesn't mean you want to change your physically change them. Each Micro Smart Switch works with your existing light switches, allowing for invisible installation that suits your décor perfectly.Or- use Aeon, slick design, AL001 glass touch panel for control.
Small in size. There usually isn't much space behind your light switches, that's why we've reduced the size of our 2nd edition Micro Smart Switch. It's now only 1.8cm deep, helping to ensure world wide compatibility. Simple installation. Some home automation installations require a lot of expensive cables to be installed. Not so with Aeotec's. The Micro Smart Switch utilises your existing wires, and can be easily installed with little more than a screwdriver.
Precise control. Rooms don't have just one appliance - it's likely that areas like your home theatre have multiple switches. That's why the Micro Smart Switch can be part of a scene, allowing you to group switches together so they work in sync and talk to each other effortlessly 
