Honda CBR600F4 2002 All Balls Front Wheel Bearing and Seal Kit
Honda CBR600F4 2002 Front Wheel Bearing and Seal Kit
Replacement Wheel Bearing Kit
Feature precision hi-speed bearings. Chevron SRI2 hi-performance grease with special rust and oxidation inhibitors to increase bearing life.
Complete wheel bearing replacement kit including bearings and seals.
Wheel Bearing Installation
- Bearing Removal
Use a long punch (should have a good edge)
Remove any Circlips or retainers. Insert the punch into the wheel and catch the edge of the bearing on the other side. Using a hammer, hit the punch and work around the entire circumference of the bearing. The bearing and seal will eventually be pushed out of the wheel hub. The second bearing can be removed using a punch, a long socket or other suitable driver.
Note: The bearings will be damaged during the removal process and should not be reused. The hammer blows transmit their impact through the balls causing small flat spots, which will cause the bearing to quickly fail if reused. - Inspection
Inner Spacer: Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the center spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.
Wheel Hub: Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit.
Outer Wheel Spacers: Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced. - Bearing Installation
Note 1: Improper installation can cause bearing damage and dramatically reducing bearing life.
Note 2: Heating the wheel hub will cause the hub to expand slightly and will make bearing installation easier.
Follow the simple rules below for successful bearing installation:
- Apply pressure ONLY to the outer race of the bearing.
- Apply pressure evenly so the bearing remains square to the wheel hub.
- Seat the first bearing fully.
- Remember to place the inner spacer between the bearings.
- Tap the second bearing in until the inner race just touches the center spacer. See fig. 1. Fully seating the second bearing may cause both bearings to become side loaded causing premature failure. See fig. 2.
- If the center spacer is loose after the second bearing is installed this may be a sign that the center spacer is too short and needs to be replaced or the second bearing needs to be taped in further. A lose or worn center spacer can cause the bearing to be side loaded in the opposite direction after the axel is torqued down. See fig. 3.
(596806)
Your item will be professionally & carefully packed and despatched in a timely manner.
All orders will normally be posted within 1 to 2 business days after confirmation and verification of your payment information. Orders are not usually processed for shipment on weekends and bank holidays.
Please refer to the top of the listing for postage options and charges. We regret that we are only able to offer shipping to mainland UK at this time.
We want you to be happy with your purchase from M&P Motorcycles, however there may be certain instances products may need to be returned.
If you change your mind
If you have simply changed your mind about any item ordered and you wish to return it, then you can do so provided you inform us of your decision within 30 days of receipt. All you will be responsible for is the cost of the return postage. The item should be unworn, undamaged and must be 'as new' when returned to us. We will issue an exchange or refund to you via your original payment method.
Transit
If any items were damaged in transit, we ask that you report it to us within 7 working days on their return they can be replaced or a refunded issued via your original payment method.
Faulty on Arrival
If your items are faulty on arrival, you should inform us as soon as reasonably possible. Items should be returned in their original packaging when possible with a copy of original documentation. Once we have verified the fault, we will issue a replacement or full refund to you via your original payment method.
Items Faulty in Warranty Period
If any of your purchases develop a fault within its warranty period it will need to be returned. Once the fault has been verified, a repair or exchange of goods will be issued.
Notes
- Returns take approximately five business days to process upon receipt of the item.
- We are not responsible for the loss or damage of items during their return.
- Buyer is responsible for any shipping charges when returning the item.
Return address
M&P Direct Ltd.
Phoenix Way, Garngoch Industrial Estate, Gorseinon, Swansea. United Kingdom. SA4 9HN.
Got a question? We're here to help. Our customer service hours are 9am to 5pm Monday to Friday, excluding bank holidays.
With over 30 years experience in mail order M&P know a thing or two about fast and efficient service but what really sets us apart from the rest is how easy we are to deal with.
Our aim is to enhance your biking experience by making sure that we have the products that you want, when you want them. With many items you won’t find in your local store available to you at the best value for money prices.
All this is contained within our purpose built mail order distribution warehouse on the outskirts of Swansea. With some staff having over 25 years experience and a state of the art ordering system we want to give you peace of mind in knowing our aim is to put you on the road and keep you there.
