eBay

This is a brand new Genesis Offroad JK Dual Battery Kit with 85 Amp Isolator. We are an Authorized Dealer of Genesis Offroad and carry the full line of products.

Fits the following applications:

'07-'11 Jeep Wrangler JK 2 Door
'07-'11 Jeep Wrangler JK Unlimited 4 Door

Part #: 131-JKDBKE

Finish: Black Powder Coated

IMPORTANT NOTE: Batteries NOT Included (Sold Separately)

Genesis Offroad - JK Dual Battery Kit

• Completely pre-wired out of the box
• Fits 3.8L, 3.6L, Hemi 5.7L & 6.4L, LS, and European diesel engines
• Boost switch included - jump start your vehicle off your second battery
• Power & Ground bus bars make it easy to connect accessories
• Smart Isolator automatically handles all charging functions
• NEW FEATURE! Interface port pre-wired for the G Screen monitoring system (sold separately)
• Integrated fuse box holder and evap solenoid holder
• Best quality wires, soldered and crimped connectors, sealed heat shrink tubing
• Powder coated for durability
• Proudly made in the USA

The top cover plate has several innovative features in a simple package. All of the wiring has already been done for you, and the smart isolator comes pre-installed. The welded gussets on top have holes with grommets to route the wires directly to the correct battery post, so there's no guess work involved to make the connections. Use the extra grommets for routing your own accessory wires cleanly and neatly to the power and ground bus bars. High quality battery terminal connectors are soldered and crimped to the flexible 2 gauge wire connecting the batteries together. With all the wiring integrated into the top plate, servicing your batteries has never been easier. Simply pull the terminals off the battery posts, remove the 4 easily accessible stainless fasteners securing the lid, and all the wiring can be lifted up and out of the way to service your batteries when necessary.

The included smart isolator gives you automatic control of all the charging functions with no interaction required.

Here's how it works.
• When both your batteries are fully charged at 13.2 volts, they are automatically connected and are charged at the same time.
• When you park and turn off the engine, but continue to use accessories such as lights or the stereo or a CB, both batteries begin to drain down.
• When your main cranking battery reaches 12.7 volts, the smart isolator separates the batteries, so that your cranking battery will have enough power to start the engine. The second battery continues to power your accessories for as long as it will last.
• After you crank the vehicle, your main cranking battery will be charged up to 13.2 volts first, and then the isolator will begin charging your accessory battery. By only charging one battery at a time, your alternator is protected from excessive strain.

What if your cranking battery is somehow drained down too low to be able to start the vehicle? We have a solution for that.
• Press the Start Boost button and the isolator will connect both batteries together for 1 minute, acting like built-in jumper cables to jump start your engine off your accessory battery.
• As long as the combined voltage of the 2 batteries is at least 12.7 volts, you'll be able to start your vehicle instead of being stranded with a dead battery!
• The alternator will charge both batteries for 1 minute, then switches back over to automatic mode to reduce the strain on your alternator.
• A remote status indicator light can be added on your dash to show you when the batteries are connected, indicating that they are both fully charged. Simply extend the white wire on the isolator to your indicator light, then to an accessory power source.

Also includes high amp power AND ground bus bars. The bus bars are already pre-wired to the accessory battery. Now you can quickly and easily connect your winch, lights, amplifiers, and lots more while keeping the wiring neat and orderly. Your winch or other high-amp accessories go onto the large center post on the bus bars, and all your other accessories go directly to the smaller screw terminals on the bus bars.

Battery Options:
• Any Group 34 battery will fit this tray
• Optima Red Top is a good engine starting battery, but not recommended or warranted for use in deep cycle applications. 800 CCA, 50 Ah capacity, 100 minute reserve time
• Optima Yellow Top is a good high power, dual purpose engine start and deep cycle battery. 750 CCA, 55 Ah capacity, 120 minute reserve time
• Odyssey 34-PC1500T is for those who need the most capacity possible! 850 CCA, 68 Ah, and 135 reserve time
• The original factory battery will not fit due to its larger size
• Both batteries must be the same physical size for the top lid to securely hold them in place

Isolator Option:
Technically speaking, the isolator rating should match the alternator output rating. In real world application, the actual output of the alternator is much lower than the published rating, so the 85 amp isolator is plenty sufficient for most Jeep owners. Some Jeep owners like to do everything overkill just for peace of mind, so there's no downside to going with the upgraded version.

• Standard 85 amp - suitable for most general purpose uses, including Jeeps with a winch, lights, CB, etc.
• Upgraded 200 amp - highly recommended for Jeeps with multiple high amp draw accessories such as big stereo systems or lots of electrical components. Required if using an aftermarket high output alternator.

IMPORTANT NOTE: G Screen Monitoring System Option Available Separately!
Need to keep a closer eye on your batteries? Check out our new dual battery monitoring system - the G Screen.

Fitment Info
Engine compatability:
07-11 3.8L
European diesel engines (left hand drive only)
Hemi engines - 5.7L, 6.1L, 6.4L
LS engines including the new LS3

Power add-on compatibility
RIPP Supercharger
Prodigy Performance Turbo
Magnuson Supercharger
Sprintex Supercharger

Snorkel compatibility:
AEV
Rugged Ridge
Volant
ARB
Not compatible with the River Raider cowl snorkel
Works with aftermarket air intake systems that use the factory air box space.

Welcome to the AZ Offroad & Performance eBay Store!
We appreciate your business. To make your shopping experience as simple and easy as possible, please refer to our company policies shown below.

Payment Information:

We accept PayPal and all major credit cards using PayPal.
We accept PayPal eChecks. Just like a regular check, it usually takes between 3 and 5 business days for an eCheck to clear in our business PayPal account.
For shipment to an Arizona address, we are required to collect 9.3% sales tax.
We suggest immediate payment for all orders, but do allow 10 days from the date of purchase for payment to be received.
If payment is not received within 10 days of the order being placed, an Unpaid Item Case will be opened.

Shipping Information:

UPS Ground / FedEx Ground shipping is free to the lower 48 states, excluding Alaska, Hawaii, Puerto Rico, Guam, and all other U.S. territories.
For international shipments, orders may be subject to additional duties, taxes, charges, fees, and costs associated with the shipment of the item once it has reached its destination. These charges are the buyer's responsibilty.
Shipping is available to a PO box and any APO/AA/AE/AP address at an extra charge for this service when available.
Most orders will ship within 1-3 business days from the time payment is received and cleared.
Shipments are not made on weekends or holidays.
Express shipping is available at the buyer's expense. Please contact us for a shipment quote to your location.
Some out of stock items are drop shipped from a distribution warehouse or directly from the manufacturer, so tracking information may not be available immediately.
Tracking numbers will be updated to as quickly as possible once an order has processed and shipped. Tracking numbers are updated manually, so please allow enough time for your information to be entered after your order has been placed.

Return Policy:

AZ Offroad & Performance, Inc. & will do everything possible to ensure the customer's satisfaction.
If there is any error in the part received, please contact us immediately.
Returns will be accepted if the item is unused, uninstalled, in the original packaging and in brand new condition. Items that are defective may also be returned. We are not responsible for install mistakes. Items must be returned within 30 days from the purchase date.
All returns must be approved and issued a (Return Authorization) RA # for return. The RA # must be on the outside of each package with the RA # in a visible area. Any package without the RA # will be refused.
Buyer is responsible for shipping charges on returned items and to insure the package.
Returns may be subject to a 20% restocking fee. If any item is returned by choice that originally included free shipping (not a defective or performance claim), there will be a restocking fee deducted from the refund.
Once items have been received & inspected per our guidelines, a credit or refund will be issued to the customer.
Any cancellation must be approved prior to shipping. Any item that has already shipped must be returned according to the guidelines stated above.