Variable Treble Bleed Circuit included:
This mod keeps the tone you have on "10" throughout the entire range of the volume control.
We add a resistor capacitor network to the input and output of the volume control to
keep the highs from leaving your tone as the volume is decreased.
By adding this circuit we can help you avoid the "muddy-tone" syndrome.
Now your tone is much more controllable and articulate!
When the Treble Bleed Circuit is included:
This variable tone circuit is pre-installed.
The Treble Bleed is hand-soldered here in our shop: between the input and output lugs of your guitar volume control pot, to smooth out treble bleed. Get more uniform tone from 1 to 10, and a more rounded sound at low volume.
Turning the volume control applies varying amounts of a specially tuned high frequency filter to the selected pickups. Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise. On Humbuckers (either North or South or both coils can be filtered). This variable treble bleed circuit is pre-installed. This variable treble bleed/bypass circuit corrects the problem of high frequency losses, provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.
The body finish is New!
NOTE:
Please don't ask us to sell the body without the electronics-there included free:
All hardware, pickups,strap knobs, electronics, switch :
INCLUDED and installed on body at NO CHARGE
Neck pocket 3" long, 2-1/4" wide, and 5/8" deep fits a Fender Neck, Warmoth or Allparts NecksListed, upgraded, customized and modified by:
This Guitar features:
2 New SRV Pickups, new electronics and new finish!
SRV-Bridge and Neck Tele Pickups are installed
for fat clean tone or harder driving rock with more grind
Neck and bridge will be equal, or bridge slightly hotter when playing single notes.
As you turn your guitar's volume down, the pot allows some of the current to go to ground as opposed to the output.
The frequencies that leave first are the highs, which leave the tone muddy and obscured without an "edge" on it to a discerning ear.
Avoid this by using our:
Haywire Treble Bleed Circuit
This circuit is pre-installed.
The Treble Bleed is hand-soldered here in our shop: between the input and output lugs of your guitar volume control pot, to smooth out treble bleed. Get more uniform tone from 1 to 10, and a more rounded sound at low volume.
It prevents the treble frequencies from bleeding off. It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre.
At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum:
1-error-correction of signals with enhanced clarity
2- preserve high end frequencies
3-improved taper when rolling back your volume control
Hand-soldered here in our shop:
between the input and output lugs of your guitar volume control pot, to
smooth out treble bleed.
Get more uniform tone from 1 to 10, and a more rounded sound at low volume.
THE NECK
Send us your neck, we'll add strings, set it up, set truss rod, action and intonation. SRV Neck Pickup:
DC Resistance: 6.80K
The
Bridge and Saddles on this Guitar Body
6 Saddle Bridge with String through bridge body bridge with custom string ferrules in the back
Wood and Finish | Maple-Satin Nitro Lacquer finished |
---|---|
Orientation | Right Handed with standard Strat or Telecaster Headstock-your choice! |
Nut Width | Your Choice |
Nut | White Corian or Black tusq-your choice! |
Back Contour | Standard thin or your choice |
Frets | 6105 Stainless Steel Frets or your choice |
Radius | 10-16" Compound |
Inlay | Black Face Dots |
Scale | 25-1/2 or 24-3/4" |
Be ready to make any adjustments necessary to make your project work with any necks and any necessary
adjustments to make your neck and body fit together well. It takes skill it's not co-incidence.
If you know what you're doing this is easy. If you don't-then leave this page.
Remember to place your neck in the body you intend to use and drill holes in the neck so they will line up with this body.
It may require you to do some work in the form of plugging some neck holes.
Some of you know that and we know that. The rest of you roll up your sleeves and don't complain.
Most
craftsmen realize- every neck may not fit every body as well as every
body will not suit every neck. Sometimes holes will line up and
sometimes they won’t-so again, make sure you drill your OWN holes in your neck and plug any existing ones.
Clamp
and align prior to drilling neck holes. If you need to plug some holes
then-by all means-do it. We cannot be responsible for
careless
installation so-be sure you're competent before you buy anything
requiring skills to assemble. If you're gonna "Do it yourself" then do
it.
We are aware that there are some differences between bodies and necks.
They are not all identical. A small space in the neck pocket however will not affect the playability
setup, neck installation or action adjustments. Fender often times uses shims in the pockets because of that reason.
There
should be some space to move the neck right or left when adding a neck
so as to get the margins even on the right and left sides of the fret
board.
There is always craftsmanship involved with building and modifying guitars.
Be ready to make any adjustments necessary to make your project work with any necks and make the necessary adjustments.
If
you feel that you don't have the skill in working with wood or guitar
mods-please don't feel bad, instead-send us your project parts, we can
do it, and we'll finish it for you.
However you can also write or call us prior to your purchase and ask any questions you'd like.
Send us your neck or body with your favorite strings and we'll mount the neck on it for you for just $45 plus return shipping.
See more about our guitars and models on the Haywire Website
Haywire Custom Guitars
Be sure to add "Haywire Custom Guitars" to your favorites list!
Check out our other Guitars!
This is an excellent instrument for a serious player.
If you take your playing seriously then take a great guitar to the gig
with you. This instrument is very sweet and will serve you, the
professional player, for many years to come.
You practice hard and you work hard on your playing! So... get a great tool to work with!
No roadblocks to your success as a guitarist!
write with any questions you may have:
email us!
Instruments for Professionals
We Ship World Wide!
email: Haywire Custom Guitars.com
We Ship World Wide!