|
GENUINE ATMEL ATmega 328 with one 16MHz Crystal and one 28 Pin DIL socket and two 22pf capacitors
Here we have an ATmega328p pre-loaded with the Arduino UNO (16MHz) Bootloader, a 16Mhz crystal, and one 28 pin Dil Socket as well as 2 x 22pf load capacitors. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.
To get this chip working with Arduino IDE, you will need the 16Mhz crystal included, and an external 5V supply, or you could use a usb to ttl converter to power the chip and upload your sketches (pictured below) just like you do with your arduino.
If you are not comfortable doing this, we recommend purchasing the Arduino Uno board (please see our other auctions for a cloned Uno for much cheaper than the arduino branded boards) that has all of this built into the board.
Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage! Note: This contains the bootloader used on the Arduino UNO.
We strive to post as fast as humanly possible, but sometimes we will only be able
to post your item the next working day after receiving payment.
In most cases we will post royal mail 1st class for orders within the U.K or Royal
mail airmail for orders outside of the U.K, unless otherwise stated. We strive to
make you as happy as we can, and therefore if you wish to make other postal arrangements
please contact us and we will see if we can oblige.
International customers please note: Airmail usually takes 3 to 5 working
days to arrive, but in extreme cases it can take up to 15 working days to arrive,
particularly if customs decides to inspect the package.
We try to be as green and non-evil as possible, and as such we tend to use as much
recycled materials in our packaging as possible. So you may receive your item in
a previously used envelope or bubble wrap.
By default we do not include a sales receipt in the packaging.
If you would like brand new packaging and bubble wrap and a receipt, then please
contact us upon ordering and I'm sure we could sort something out, and possibly
plant a tree to make up for it.
With the goal of making our customers as happy as can be, we work very hard to post
as fast as we can, communicate in the friendliest most helpful manner, and most
importantly, offer the best gear at the most competitive prices.
If however you are not happy in any way with our service or your item, then please
contact us before leaving average or even worse, negative feedback, and we will
do everything we can to resolve any issues.
In keeping with making you as happy as can be, we will in turn leave nothing but
the nicest, all-warm-n-fuzzy-inside feedback for you too.
If you are in any way unhappy with your purchase *gasp* then we will do all we can
to make you happy.
Just return your item in its original packaging, in the condition we sent it to
you in, and we will refund your money (less postage).
|