Introduction
The
T-862++ uses an Infrared source and optics to target heat to individual
components without dislodging other SMT parts by way of eddies air
currents.
Unlike
Air Re-Work systems, The T-862++ uses an Infrared source and optics to
target heat to individual components without dislodging other SMT parts
by way of eddies air currents.
Infrared
soldering technology with independent exploration capabilities via
three (3) focus lenses which are included with the package.
Technician focused infrared heat is easy to target most component removal/replacement and re-work.
The Workstation has a 120 X120mm a 450W controlled Pre-heating System.
Infrared heat source bulbs are long-lived, in-expensive and easily replaced.
Processor controlled set-point regulated temperatures with thermocouple feed-back.
Integrated and adjustable Infrared (IR) eye protection.
Can suitable for the entire component, especially Micro BGA component.
The T-862++ system also contains a temperature controlled touch-up iron and stand.
Extra soldering tools are not necessary to solder/unsolder and re-work Surface MountTechnology (SMT) components 15-35mm in size
Training is illustrated in factory provided video.
2 years free warranty and life time free maintenance service
Technical Parameters
Working Voltage: AC110V/60Hz (we stock the item specail for the country all over the world)
Output power: 800W
Infra-red lamp body temperature adjustable: 100-250
Preheating dish temperature adjustable: 60-200
Feature
Infrared
soldering technology with independent exploration capabilities via
three (3) focus lenses which are included with the package.
Technician focused infrared heat is easy to target most component removal/replacement and re-work.
The Workstation has a 120 X120mm a 650W controlled Pre-heating System.
Infrared heat source bulbs are long-lived, in-expensive and easily replaced.
Processor controlled set-point regulated temperatures with thermocouple feed-back.
Integrated and adjustable Infrared (IR) eye protection.
Can suitable for the entire component, especially Micro BGA component.
The T-862++ system also contains a temperature controlled touch-up iron and stand.
Extra soldering tools are not necessary to solder/unsolder and re-work Surface MountTechnology (SMT) components 15-35cm in size
Training is illustrated in factory provided video.
What you will get
Description | Quantity |
T-862++ Chassis | 1 |
PCB Board holder | 1 |
936 Searing-iron | 1 |
936 searing-iron rack | 1 |
Lamp Body and Lens(D=28mm) | 1 |
Lens(D=38mm) | 1 |
Lens(D=48mm) | 1 |
Eye protection(IR Filter) | 1 |
Cell guide | 1 |
Focus holder | 1 |
Focus holder control knob | 1 |
Fasten nut for focus holder | 1 |
Steady ring | 1 |
Fasten nut for steady ring | 1 |
Power Cable (110VAC or 200VAC) | 1 |
5mm Fuse, 10A 250VAC(Spare) | 1 |
CD User Manual w/Video |
|