MODEL EN-8207801 (200W AT Power Supply)- Total of five (4) Peripheral Connectors for your hard drives and CD Rom drives, etc.
- One Floppy Drive Connector for your 3.5" floppy drive.
- Ground pin is included for true earth ground connection to your case. You can leave this one alone if you don't know what to do with it.
SPECIAL FEATURES - Universal input 110V or 220V user switchable
- UL/CSA and TUV approvals
- Power good signal
ENVIRONMENTAL - Operation temperature: 0°C to 50°C ambient
- Storage temperature: -40°C to +70°C
- Cooling: Self-contained fan
- MTBF: > 100,000 hours at full load and 25°C ambient conditions
ELECTRICAL SPECIFICATIONS (Input) - Input range: 90-135/180-265 VAC switch select
- Frequency: 47-63 Hz
- Input current: 6A @ 115VAC, 3A @ 230 VAC
- Peak Inrush current: 40A peak @115 VAC, cold start at 25°C
- Efficiency: >65% @full load, nominal line
- EMI / EMC: FCC Part 15J Class B, CISPR22/EMC directive 89/336EEC/ LVD 73/23EEC
ELECTRICAL SPECIFICATIONS (Output) - Maximum power: 200 watts
- Hold-up time: 16ms min at full load and nominal line
- Transient response: 10% maximum deviation with 1 ms recovery time to within 100 mV (+5V)
- Leakage current: 0.75 mA @ 250 VAC to GND
- Power good: TTL compatibility. Power good signal goes High after turn-on 100 ?500 ms signal goes low at least 1ms before loss of regulation.
|