Zephyr Xtra Set Includes:

• DCS51 All-In-One Throttle/Command Station/Booster to run your layout

• PS314 Power supply to provide power to run your DCS51

• One LT1 LocoNet Cable & Decoder Test Kit

• Zephyr Xtra Quickstart Guide

• Zephyr Xtra Manual

• Digitrax Decoder Manual

 

Zephyr Xtra Offers:

• Cost effective entry level LocoNet Compatible system

• Simple intuitive controls for running trains.

• Large speed control knob and direction switch with brake.

• Full numeric key pad

• Large easy to read LED display

• Easy 2 and 4 digit addressing.

• Smooth speed control.

Run multiple trains at once without blocking!

• Run up to 20 addresses at the same time on your system.

• Run up to 20 throttles at the same time on your system.

 

Jump Ports for using DC power packs as additional throttles

• Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.

• Simple, cost effective way to add more throttles to your Zephyr Xtra set.

• Makes it easy to share the fun of DCC with layout visitors and young operators.

• Functions on locos controlled by Jump throttles remain active.

Over 9000 Locomotive Addresses

• Use Address 00 to run one or more locos without DCC decoders

• Two Digit Addressing is easy to use. (Address 01-127)

• Four Digit Addressing-use the number painted on your engines as its address.

 

3.0 Amps of Power to run multiple trains.

• Booster outputs 13V DC for safe operation in N and HO scales.

Function Control

• Control for 30 functions (F0Fwd, F0Rev and F1-F28)

• Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.

• Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).

Stationary Decoders, Turnout Control & Turnout Position Reporting

• Access to stationary decoder control for turnouts and other devices.

• Control 999 stationary decoder addresses.

Consisting

• Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.

• Advanced consisting, allows only advanced consist capable mobile decoders.

• Basic consisting, program decoders to run on same address.

Decoder Programming

• Built in read/write programmer that can read and write all CVs.

• Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.

• Operations mode programming can be used to program decoders on the layout.

• Blast Mode Programming for Sound

Expandability with Digitrax LocoNet

• Use Zephyr Xtra as a starting point for your Digitrax LocoNet System, then add components.

• Use Zephyr Xtra as an expansion set with Digitrax equipment you already have installed.

• Add Radio or IR via LocoNet. Just plug in a UR90, UR91 or UR92 receiver and add IR and/or Radio throttles.

 

Note: Existing DCS50s/Zephyrs are not upgradable to the new DCS51s/Zephyr Xtras. The DCS51 is a completely new board design with additional keys and additional functionality.