When you need a tough, commercial-grade lock that has a more residential look and feel the Falcon Y Series does the job. Ideal for military, government housing and multi-family applications, the Y Series is also a good fit for narrow stile doors thanks to its smaller profile. Falcon Y Series locks feature an interchangeable core that can be removed for quick, easy re-keying and are compatible with SFIC products from other manufacturers. And they’re backed by one of the best names in the business.

 

Features and Benefits

Tubular lockset shall be Falcon Lock Y Series or equal and meet the following requirements:

Y Series locksets and latchsets shall meet Grade 2 requirements of ANSI/BHMA A156.2, Series 4000.

Locksets and latchsets, where required on fire rated openings, shall be UL listed for 1-1/2 hour B Label doors.

Levers shall comply with all state and local handicap codes and meet ADA requirements.

Levers shall have a minimum length of 4-3/8”from center of opening to end.

Outer trim of lock shall be one piece, factory preassembled. Inner trim attaches by two through-bolt screws through a steel mounting plate on inner spindle assembly.

There shall be no exposed screws on trim.

Cylinders shall have a minimum of 6 active pin chambers and shall be furnished with 2 nickel silver keys.

Locks provided with levers shall have individual return springs in both trims for positive return and no lever sag.

The lock spindle shall pass through the latch hub to create a one piece unit for strength and security.

Locksets and latchsets shall be provided with screws for mounting in both wood and metal doors and frames.

Specifications

Door Thickness: Y Series locksets accommodate door thicknesses of 1 3/8” to 1 3/4”.

Backsets: Universal 2 3/8” to 2 3/4” UL Listed label latch is standard.

Mechanism: Cold rolled steel, zinc plated and chromate coated for rust resistance.

Attachment: Outside knob/lever, rose and chassis one single assembly. Inner mechanism secured to outer mechanism with two through-bolt screws through a steel mounting plate. Snap-on inner rose conceals screw heads. Knob/lever mounts over knob/lever retainer.

Handing: Non-handed. May be used in right hand or left hand doors swinging in or out.

Cylinders: Furnished with solid brass plug and housing, drilled with 6-pin chambers, pinned in 5 unless otherwise specified. Hana and Elite knobs and Dane levers available with 6 or 7-pin small format interchangeable cores. Furnished with two nickel silver keys standard.

Keyways: ”G” keyway standard on standard cylinders. 

Latches: 1/2” bolt projection. UL standard. Furnished standard with a universal 2 3/4” backset with a 1 1/8” x 2 1/4” faceplate. 

Strikes: 2 3/4” x 1 1/8” T-strike standard. 

Screws: Furnished with combination wood/machine screws for use on wood or metal doors or frames.