4.3 inch Foldable LCD Monitor + Car Reverse Backup Rear View Parking Camera + 2.4Ghz Wireless Receiver and Transmitter Kit
About the 4.3" TFT LCD monitor
Description:
4.3" color TFT LCD car rearview monitor with 2 video input, which can work perfectly with car rearview cameras and also support car DVD and other video equipment.
Features:
Foldable design can better protect the screen against dust, dirt, bumps and scratches.
With 2 video input: white video cable connects to car rearview camera, yellow one to other video equipment.
Parking rearview priority: the monitor will start up automatically and synchronously display the video from rearview camera when you're backing your car.
Supports car DVD, VCD, camera and other video equipment.
No audio input or output.
Specifications:
Color: Black
Housing material: ABS plastic
Screen size: 4.3 inch
Resolution: 480W * RGB * 272H
Aspect ratio: 16:9
Power supply: DC 12V±10%
Operation temperature: -20~+50 Celsius degree
Monitor folded size: Approx 13.4 x 11.2 x 2.5cm / 5.28 x 4.41 x 0.98in
Package size: 15.6 x 13.5 x 5cm / 6.14 x 5.31 x 1.97in
Package weight: 339g / 11.94oz
Package includes:
1 x 4.3" Car Monitor
1 x Power Cable
1 x User Manual
About the camera:
Features:
Waterproof, Can be used both in car and home
170° wide viewing angle
Applicable to variety of Vehicles: car, truck, RV, mini-van etc
Can help avoid incidents and accidents abrasion well
Compact design and easy to install
Specifications:
Image sensor: Color 1/3" Sensor CCD
TV system: NTSC/PAL
Resolution: 756(H)×720(V) Pixel
Horizontal resolution: 480TVL
(Front)No mirror function/(Rear) mirror function
Automatic White Balance
automatic backlight compensation
Minimum illumination 0.2 lux only
RCA video output Vpp/75Ohm
Operating on 12V DC / ca. 200mA
Operating Temperature: -20~ 60(degrees Celsius), RH95% Max
Storage temperature: -30 ~ 60(degrees Celsius), RH95% Max
Video cable length: 6m
Power supply cable length: 1.5m
Installation:
Use the hole driller to mount the camera at the back of the car (on the license plate back window or other suitable place)
Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.
Package includes:
1 x Car Rear View Camera
1 x 6M Video Cable
1 x 1.5M Power Cable
1 x User Manual
About the 2.4Ghz Wireless receiver and transmitter
Description :
This adapter is an advanced wireless module for car DVD reverse camera that enables normal reverse camera to become wireless!
Fit all RCA composite video connections
Connects to rear-view camera and front video screen
Take one minute get your camera become a wireless camera
Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
100M wireless receiving distance
Transmitter/Receiver Cable Length:1.5m
Package includes:
1 x Wireless Transmitter
1 x Wireless Receiver
How to Install:
1:Take out your stock license plate light at the back of your car.
2:Fix the camera to where the stock license plate light was.
3:Connect the built-in license plate light of the camera to where the stock
license plate light was connected to get the power.
4:Connect the wireless module (transmitter) to your camera via the two cables
- yellow plug for AV output and black plug for power .
5:Connect the wireless module (transmitter) to the reverse light of your car to get
the power - red wire for positive and black wire for negative .
6:Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
7:Connect the wireless module (receiver) to your car battery or cigarette lighter to get
the power - red wire for positive and black wire for negative .
8:You will see the images when your car is in reverse shift.
|