Examine the decal for any damage that may have occurred during shipment. Please contact me if any damage is done and I will replace the decal. Rub over the decal with a squeegee or credit card to ensure the decal is sticking to the clear transfer tape and flat.
Prepare application surface area making sure it's clean and dry.
For bigger decals: Use masking tape to position the decal where you want
at the top of the decal (or the side for decals that are longer than
they are tall). Fold it above the tape and remove the backing paper
leaving only the decal and the transfer tape. Then with a squeegee or
credit card slowly roll the decal down over the surface carding it until
the decal is applied.
For smaller decals: Slowly and carefully apply the decal and
transfer tape to the surface. Once everything is adhered to the surface,
rub all area of the decal with a squeegee or credit card to ensure full
adhesion.
Slowly peel the transfer tape away from the decal and surface.
If you encounter air bubbles you can remove them using a sharp needle, poking a hole in them, and rubbing over the decal with a finger to smooth out the air.
I AM NOT RESPONSIBLE FOR ERROR IN INSTALLATION. IF YOU HAVE ANY QUESTION ABOUT APPLYING YOUR DECAL CONTACT ME AND I WILL BE HAPPY TO HELP IN ANYWAY I CAN.