Please read this listing in its entirety before bidding! You are accepting all of our Terms of Sale when you place a bid. Before bidding, be certain that you understand the condition of the item, and will accept the item as it is described.  If you have any questions regarding this, or auction, PLEASE ASK PRIOR to bidding.  Thank you!

HAPPY BIDDING!!!! With Confidence

Item for Auction or Sale:

1 unit – NETGEAR ProSAFE FVS318N 8-Port Wireless-N VPN Firewall with SSL and IPSec VPN (FVS318N)

This auction is for used NETGEAR ProSAFE FVS318N 8-Port Wireless-N VPN Firewall with SSL and IPSec VPN (FVS318N)

The item is in used cosmetic condition as you can see in Picture for more detail and condition.

In the website of spec has warranty information on the product which statement as lifetime warranty but I am not sure is that true and you can call tech support ask them.

Shipping, packaging, and handling flat charge $9.95 for US resident Only.

 

BRAND / MARKS:

Brand:     NETGEAR PROSAFE

Model:    FVS318N

Serial #:  2JF326BK00016

MAC(WAN):  4C60DEF2F7A7

MAC(LAN):  4C60DEF2F7A6

MAC(WIRELESS):  4C60DEF2F7B8

FEATURE:

The NETGEAR ProSAFE FVS318N is a high-performing business-class VPN Firewall with 1 Gigabit WAN port and 8 Gigabit LAN ports that also delivers Stateful Packet Inspection (SPI), both IPSec and SSL Virtual Private Network (VPN), Network Address Translation (NAT), AES and 3DES Encryption, Denial of Service (DoS) protection and provides full secure network access between headquarter locations, remote/branch offices and remote workers. The FVS318N also features a built-in Wireless-N access point. This makes it the ideal solution to provide businesses with the essential network security needed to stop unwanted intrusions.

·         1 Gigabit WAN port with 8 Gigabit LAN ports

·         Built-in Wireless-N access point

·         Business-class Stateful Packet Inspection Firewall prevents unwanted access to your network

·         12 dedicated IPSec VPN tunnels and 5 SSL VPN tunnels for secure remote access

·         250 Mbps LAN-to-WAN throughput, 6,000 concurrent sessions

CONDITION:

·         Cosmetic Condition:  ** VERY Good Condition **

·         May show some scuffing, scratches, marking and/or stickers.  Check pictures for condition.

·         Working Condition: ** EXCELLENT!! **

 

·         Has been Turned ON fine and tested DATA link on every port.

·         The password has been removed

·         Set to factory default

·         Guarantee against DOA(Dead On Arrival)

WARRANTY:

ADDITIONAL NOTE:

30 DAYS NON- DOA(Dead On Arrival)

Please see output of CONSOLE LOG as below page

PACKAGE:

·         Used: NETGEAR PROSAFE FVS318N

·         Not include: Power ADAPTER, Console cable, manual, or any other accessories, etc.

Manuals and/or install software (where applicable) may be available through the manufacturer's website

PAYMENT:

SHIPPING:

 Pay with PayPal

1. We only accept PayPal as our payment method.

2. Payment must be sent within 5 days after purchase.

Tax:

1. Sale tax of 7.0% will be apply to all sales within Indiana

2. Buyers are responsible for tax of their own countries.

1. Please provide a correct shipping address; we are not responsible if buyer who provides wrong shipping address after item shipped.

2. All items will be shipped out directly from USA. We ship within 48 hours after payment is received and cleared.  The item will not be ship on weekend and holiday.

3. We will ship to PayPal confirmed address only.

4. We take great care packaging every item to ensure safe shipment to you. We charge a shipping fee only to cover our costs of materials and labor.

RETURN POLICY:

TERM:

1. All sales are final.

2. Defective product will be offered exchange, in condition that it is returned within 7 days upon receiving. (Buyer pays shipping fees).

3. If the item is damaged by buyer's usage, seller will not exchange nor refund the item.

4. It is the customer’s responsibility to pay for and ship the item back to us.

We warrantee and represent that the goods are as described in the above listing. We specifically disclaim any implied warranties of title, merchantability, fitness for a particular purpose and non-infringement. Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. We pride ourselves on our customer service. In the rare event that you have a problem with your item please contact we and we'll be happy to help.

TERMS AND CONIDITIONS:

The routers and switches included in this auction are all fully tested and functioned perfectly. They are supplied with a 30 days Limited replacement warranty.  When applicable any configuration, software, password issues as well as compatibility for particular purposes are Buyer’s responsibility and are not covered by "NO DOA" warranty.

• Warranty issues cover the functionality of the routers and switches only and should be reported with 30 days of delivery.

• Returns must have all original packaging and accessories.

• Buyer is responsible for return shipping costs and insurance. All shipping charges (DELIVERY & RETURN) are NON-REFUNDABLE

• Items can only be returned for an exchange. No refund will be given unless we no long have similar stock on hand to do an exchange.

• Units returned and found not to be defective will be returned at buyer expense.

• Our return/refund policy is non-negotiable

• This auction is for the hardware only. As with all refurbished and resale NETGEAR hardware, the software contained is subject to any licensing requirement by the manufacturer and is the responsibility of the purchaser.

 

 

Thanks for all your time looking we hope to see you bid!

 

Thanks for watching!!!

 

 

CONSOLE LOG:

U-Boot 2008.10-mpcore-svn (May 20 2011 - 13:36:16)

Cavium Networks CNS3XXX SDK v0.7-1202

 

CPU: Cavium Networks CNS3000

ID Code: 410fb024 (Part number: 0xB02, Revision number: 4)

CPU ID: 900

Chip Version: c

 

DRAM:  128 MB

Flash: 32 MB

*** Warning - bad CRC, using default environment

 

In:    serial

Out:   serial

Err:   serial

CPU works at 300 MHz (600/1/2)

DDR2 Speed is 266 MHz

switch/phy reset

checking the integrality of linux ... ...

flen   is    :1a84f00

fcrc   is    :891a8c36

vmoffset   is    :100

vmsize   is    :818b9f

vmcrc   is    :969cfe71

crc caled  is    :969cfe71

kernel length  is    :8489887(0x818b9f)

fw version is    :4.3.3-6

checking pass..

Hit any key to stop autoboot:  0

enter do_eth_down!!!

Starting application at 0x02000000 ...

Uncompressing Li.................................................................................................................... done, booting

Linux version 2.6.31.1-cavm1  (gcc version 4.3.3 (Buildroot 2010.05) ) #2 Mon Jun 22 21:27:12 IST 2015

Cavium Networks CNS3XXX SDK v1.1-1952

CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5387f

CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Machine: Cavium Networks ARM11 MPCore

Memory policy: ECC disabled, Data cache writeback

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512

Kernel command line: root=/dev/ram0 rw init=/linuxrc mem=128M console=ttyS0,9600

PID hash table entries: 512 (order: 9, 2048 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 128MB = 128MB total

Memory: 119508KB available (3324K code, 252K data, 116K init, 0K highmem)

NR_IRQS:96

console [ttyS0] enabled

Calibrating delay loop... 119.60 BogoMIPS (lpj=598016)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

Initializing CNS3XXX L2 cache controller... done.

Initializing CNS3XXX DMA controller

First time microcode alloc for channel 0 done @phy:26057000

First time microcode alloc for channel 1 done @phy:26058000

First time microcode alloc for channel 2 done @phy:26059000

First time microcode alloc for channel 3 done @phy:2605a000

First time microcode alloc for channel 4 done @phy:2605b000

First time microcode alloc for channel 5 done @phy:26030000

First time microcode alloc for channel 6 done @phy:26031000

First time microcode alloc for channel 7 done @phy:2602e000

First time microcode alloc for channel 8 done @phy:2602f000

Cavium EVB Board version 1.x

bio: create slab <bio-0> at 0

SCSI subsystem initialized

Slow work thread pool: Starting up

Slow work thread pool: Ready

FS-Cache: Loaded

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 4096 (order: 3, 32768 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

TCP reno registered

NET: Registered protocol family 1

Trying to unpack rootfs image as initramfs...

rootfs image is not initramfs (no cpio magic); looks like an initrd

Freeing initrd memory: 6448K

CNS3XXX PCIe Host Control Driver

 

pci_common_init(&cns3xxx_pcie0); is marked off to disable pci-e0

 

PCI-E1 uses internal clock source.

Enable PCIe PMU CLK

patch to disable pcie0

Enable PCIe1 Internal CLK

PCIE-1 equalizer setting, val:0xe2c

Active PCIe1 Clock, PHY and reset PCIe

PCIe: Port[1] Enable PCIe LTSSM

PCIe: Port[1] Check data link layer...Link up.

PCIe: Set Device Max_Read_Request_Size to 128 byte

pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold

pci 0001:00:00.0: PME# disabled

pci 0001:00:01.0: PME# supported from D0 D1 D3hot

pci 0001:00:01.0: PME# disabled

PCI: bus0: Fast back to back transfers disabled

PCI: bus1: Fast back to back transfers enabled

PCIe1: Bridge found.

PCI: enabling device 0001:00:00.0 (0140 -> 0143)

PCIe1 map irq: 0001:00:00.00 slot 0, pin 1, irq: 88

PCIe1 map irq: 0001:00:01.00 slot 1, pin 1, irq: 62

squashfs: version 4.0 (2009/01/31) Phillip Lougher

JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

msgmni has been set to 246

alg: No test for cipher_null (cipher_null-generic)

alg: No test for ecb(cipher_null) (ecb-cipher_null)

alg: No test for digest_null (digest_null-generic)

alg: No test for compress_null (compress_null-generic)

alg: No test for stdrng (krng)

io scheduler noop registered

io scheduler cfq registered (default)

cns3xxx_spi_probe: setup CNS3XXX SPI Controller in polling mode, w/o DMA

Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled

serial8250: ttyS0 at MMIO 0x78000000 (irq = 45) is a 16550A

brd: module loaded

loop: module loaded

cns3xxxflash: Found 1 x16 devices at 0x0 in 16-bit bank

 Amd/Fujitsu Extended Query Table at 0x0040

cns3xxxflash: CFI does not contain boot bank location. Assuming top.

number of CFI chips: 1

cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

CNS3XXX NOR flash: Using static partition definition

Creating 8 MTD partitions on "cns3xxxflash":

0x000000000000-0x000000040000 : "UBoot"

0x000000040000-0x000000060000 : "Manuinfo "

0x000000060000-0x000000080000 : "Calibration "

0x000000080000-0x000000980000 : "Kernel"

0x000000980000-0x000001de0000 : "File System"

0x000001de0000-0x000001fe0000 : "Configure"

0x000001fe0000-0x000002000000 : "UBootEnv"

0x000000000000-0x000002000000 : "ALL"

Initialize PHY s/w auto-polling

CNS3XXX PSE: Initialize

MAC 0

Initialize BCM53115M

enable UNKNOW_TAP_TOCPU

bcm53115M device id:(0x53128)

MAC 1

Initialize brcm50612

MAC 2

jumbo_frame off

MAX_PACKET_LEN:1536

PPP generic driver version 2.4.2

PPP BSD Compression module registered

PPP MPPE Compression module registered

NET: Registered protocol family 24

CNS3XXX Real Time Clock, (c) 2009 Cavium Networks

rtc irq:23

cns3xxx-rtc cns3xxx-rtc: rtc core: registered cns3xxx-rtc as rtc0

i2c /dev entries driver

i2c-gpio i2c-gpio.1: using pins 1 (SDA) and 0 (SCL)

cns3xxx_i2c_init:

cns3xxx_i2c_probe:

GACT probability NOT on

Mirror/redirect action on

u32 classifier

    Performance counters on

    Actions configured

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (2048 buckets, 8192 max)

CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

ctnetlink v0.93: registering with nfnetlink.

xt_time: kernel timezone is -0000

ip_tables: (C) 2000-2006 Netfilter Core Team

ipt_account 0.1.7 : Piotr Gasid³o

TCP cubic registered

NET: Registered protocol family 10

ip6_tables: (C) 2000-2006 Netfilter Core Team

IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

802.1Q VLAN Support v1.8 Ben Greear

All bugs added by David S. Miller

VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4

cns3xxx-rtc cns3xxx-rtc: setting system clock to 1970-01-01 00:00:00 UTC (0)

RAMDISK: gzip image found at block 0

VFS: Mounted root (ext2 filesystem) on device 1:0.

Freeing init memory: 116K

/etc/init.d/rcS starting

Booting FVS318N User Space...

 

Mounting file systems

sppe: Cavium CNS3XXX Smart PPE Driver - 1.0.1

[kernel mode] CNS3XXX_ARL_TABLE_ADD

Enabling Quiet Boot...Done

Setting up loopback

net.ipv6.conf.eth1.accept_ra = 0

Setting Hostname... Done.

Sat Jan  1 00:00:00 UTC 2011

Jan  1 00:00:00 FVS318N syslog.info syslogd started: BusyBox v1.17.4

starting tr69 daemon configuration....done

starting firewalld Daemon...Done

inserting default firewall rules

Restoring certficates from persistant storage...Done

Starting pnac daemon...Done

Do not need swap cal data

iwpriv wifi setCountryID 840Starting dot11 daemon...Done

Loading WpsPB Module..starting SNMP Daemon...Done

Starting the cron deamon...Done

starting ntpd Daemon...Done

Starting NIMF daemon... Done

Starting LINKDETECT daemon... Done

Creating /dev/pts/0 pseudo device for L2TP <-> PPP communication... Done

 

Failed to Open /dev/bcmDebug device

Starting IKE Daemon...Jan  1 00:00:17 FVS318N daemon.info IKE: IKE started

Done

Starting VPN KEEP ALIVE Daemon...Done

Bandwidth Profile Initialization...Jan  1 00:00:17 FVS318N daemon.debug IKE: my interface: 127.0.0.1 (lo) : grabmyaddr.c:352:grab_myaddrs

Done

File: ../microcode/boot_mc2_px.out

        Version = CNPx-MC-BOOT-2.00

        Code length = 17536     Data length = 152

0: name=../microcode/boot_mc2_px.out, index=0, core=0

File: ../microcode/main_ssl2_px.out

        Version = CNPx-MC-SSL-MAIN-0015

        Code length = 36408     Data length = 304

1: name=../microcode/main_ssl2_px.out, index=1, core=0

File: ../microcode/main_ipsec2_px.out

        Version = CNPx-MC-IPSEC-MAIN-0019

        Code length = 44292     Data length = 144

2: name=../microcode/main_ipsec2_px.out, index=2, core=0

Microcode Load Succeed

CSP1 core assignments

../microcode/boot_mc2_px.out : 0x000000

../microcode/main_ssl2_px.out : 0x000001

../microcode/main_ipsec2_px.out : 0x000006

SSLVPN Intialization .......  Done

Webserver Starting....Done

net.ipv6.conf.eth1.accept_ra = 0

Creating Dummy Config File

Loading default configurations...

Making Brand.conf...

Loading Factory Defaults ModulesInitialzing Factory defaults modules

Inserting the bcm debug module...Done

Inserting the power saving module...Done

no system settings to restore from...so restoring factory defaults...

Restoring Default configuration File ...

importing...

Copying necessary files for L2TP Server...

Done

Executing bcmRegConfig...

Done

Dumping SYSTEM_MENU_INFO

hwver: 00:00:A0:03

reginfo: 0x0005

numofimages : 1

 

currimage: 1

mac address : 4C60DEF2F7A6

 

wireless MAC[0] : 4c60def2f7b8

wireless MAC[1] : 4c60def2f7b9

wireless MAC[2] : 4c60def2f7ba

wireless MAC[3] : 4c60def2f7bb

vlan[0] MAC : 4c60def2f7a9

vlan[1] MAC : 4c60def2f7aa

vlan[2] MAC : 4c60def2f7ab

vlan[3] MAC : 4c60def2f7ac

vlan[4] MAC : 4c60def2f7ad

vlan[5] MAC : 4c60def2f7ae

vlan[6] MAC : 4c60def2f7af

vlan[7] MAC : 4c60def2f7b0

vlan[8] MAC : 4c60def2f7b1

vlan[9] MAC : 4c60def2f7b2

vlan[10] MAC : 4c60def2f7b3

vlan[11] MAC : 4c60def2f7b4

vlan[12] MAC : 4c60def2f7b5

vlan[13] MAC : 4c60def2f7b6

vlan[14] MAC : 4c60def2f7b7

WAN MAC : 4c60def2f7a7

 

pcbasn number : S.YX225O0170

 

serial number : 2JF326BK00016

 

image 0 : 4.3.3-6

image 1 : 0

productId : FVS318N

 

maccnt0: 0x22

maccnt1: 0x0

maccnt2: 0x0

maccnt3: 0x0

Done

####################################################

#Session ID: 001CD3C2C08A5A5A113BA6A26FD98458C5

####################################################

Enable hardware natting for forwarding acceleration

 

 

 

Secure Gateway Solution for FVS318N

 

FVS318N login: admin

Password:

************************************************

    Welcome to FVS318N Command Line Interface

************************************************

FVS318N>

FVS318N> show sysinfo

 

System - Manufacturer Information

**************************

hwver: 00:00:A0:03reginfo: 0x0005

numofimages : 1

 

currimage: 1

mac address : 4C60DEF2F7A6

 

wireless MAC[0] : 4c60def2f7b8

wireless MAC[1] : 4c60def2f7b9

wireless MAC[2] : 4c60def2f7ba

wireless MAC[3] : 4c60def2f7bb

vlan[0] MAC : 4c60def2f7a9

vlan[1] MAC : 4c60def2f7aa

vlan[2] MAC : 4c60def2f7ab

vlan[3] MAC : 4c60def2f7ac

vlan[4] MAC : 4c60def2f7ad

vlan[5] MAC : 4c60def2f7ae

vlan[6] MAC : 4c60def2f7af

vlan[7] MAC : 4c60def2f7b0

vlan[8] MAC : 4c60def2f7b1

vlan[9] MAC : 4c60def2f7b2

vlan[10] MAC : 4c60def2f7b3

vlan[11] MAC : 4c60def2f7b4

vlan[12] MAC : 4c60def2f7b5

vlan[13] MAC : 4c60def2f7b6

vlan[14] MAC : 4c60def2f7b7

WAN MAC : 4c60def2f7a7

 

pcbasn number : S.YX225O0170

serial number : 2JF326BK00016

 

image 0 : 4.3.3-6

image 1 : 0

productId : FVS318N

 

maccnt0: 0x22

maccnt1: 0x0

maccnt2: 0x0

maccnt3: 0x0

**************************

FVS318N>

FVS318N>