This Controller use for make build EVSE(Electric Vehicle Service Equipment) or replace EVSE controller;
This Controller will be to control Contactor(240V) switch on or off according IEC61851 protocol.
3 state light output: Ready / Charging / Error 
Accept charger between 16A/32A switched


For IEC61851 standards protocol
 
The charging controller enables charging in charging mode 2 in accordance with the IEC / SAE J standards.It communicates with the electric vehicle,identifier the charging cable,and controls and monitors the switching devices and the plug interlock.the charging controller ensures the maximum safety for the charging operation.
 
 
significant point
 
  Could be designed as 35 mm standard rail mounting/Or screw hole installation
 
  Diversified interface
 
  AC power supply, no additional power module
 
  Customizable protection function
 
  Variety of signal lights
 
  Standard-compliant AC charging in operating mode 3 requires

 


Charging controller
 

Standards
IEC 61851 

Vehicle communication
Charging mode
Number of charging interface
 
3
1...4

Operational voltage
AC 110-240V

Rated frequency
50/60Hz

Rated charging current
16/32/45A

Maximum powr loss
6w

Surge strenth
4kv

Degree of protection
IP20

Pollution degree
3

Ambient temperature
0-60ºC/-20-60ºC

Conductor cross-sections
Rigid
Flexible,with end sleeve
 
0.5....2.5mm2
0.5....2.5mm2

Relay outputs
Contact type
Maximum contact load
 
 
4 NO
3A(at 110...240V AV)
1A(12v/5v DC)

Digital inputs
Input voltage
 
110-240AC

Display
3LED


Shipping:
Item will be shipping by EMS/FEDEX/UPS/TNT express shipping way. delivery time about 3-10days according different country.
Returns:
Permitted up to one month since the purchase date if the CC(charging controller) is undamaged when received.  The buyer pays return postage.