On car adjustable Front and Rear Panhard rod / track rod adjuster DIY kit
Suits Nissan Patrol GQ & GU Series 1 (Y60)

An essential part of any lift!

Make your own On-car Adjustable Panhard rods / Track Bars
Save Big $ Over Buying New Panhard Rods

F R E E    E X P R E S S   P O S T


Make your own On Car Adjustable front and rear Panhard Rods. Unlike many adjustable Panhard rods that must be removed to be adjusted, the right and left hand threads on the adjusting bolts of the kit allow the adjustment to be done on the car without disconnecting the Panhard rod. Making it easy to correctly centralize the axles under the chassis.

The kits are easy to install and can be done any competent person with normal workshop tools and a welder in less than 2 hours. Comes with comprehensive, easy to read instructions.

Its easy to do!  Copy the link below into your browser to check-out the instructions.

https://drive.google.com/file/d/0BzSqZrfgsYE7QUJyam81UDFLcVE/view?usp=sharing

Adjustable Panhard rods are essential for any raised Patol. As the car is raised, the standard length Panhard rod pulls the axle to one side causing the tyres to rub on the fender, especially so if you have larger diameter tyres.

This kit will allow you to maintain proper alignment of both the front and rear axles preventing damage to your tyres and gaining maximum suspension travel and control.

Both the Front and Rear kits have 19 mm adjuster screws and locknuts, and are zinc plated to resist rust.

If you are handy with tools this is a great kit for making adjustable Panhard rods at a fraction of the cost of buying two complete adjustable panhard rods.

The kit contains all the parts needed to convert both the front and rear Panhard rods, as shown in the pictures.

Easy to Install with Normal Workshop Tools
  • Zinc Plate Adjuster Screws and Nuts
  • Simple Welding
  • Fantastic value
  • Save Big $ over buying new Panhard rods


Suits Nissan Patrol GQ & GU Series 1 for normal off road 4WD use.

Please check that you have the correct diameter panhard rods to suit these adjusters before ordering.

Front Panhard Rod Diameter – 34.0 mm

Rear Panhard Rod Diameter – 25.4 mm

You are buying a set for front and rear axle which comprises 1 x Front Panhard rod DIY adjuster kit and 1 x Rear Panhard rod DIY adjuster kit.

Each kit contains all the parts needed to do both front and rear Panhard rods / track bars.

Free domestic Express Post when you pay by Paypal.

We also ship Worldwide!

Sorry, no pick-up available.

Warranty: The product is warranted to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication). We will replace any faulty product only, free of charge excluding any and all related labour charges. The product must be returned to the supplier at the buyers cost with proof of purchase.