1 to 10 Channel Light Show LED Programmable Controller Chaser PIC microcontoller

The controller is designed for management of LEDs or LED modules (advertising signs, decoration of rooms and buildings, etc.). The controller can manage from 1 to 10 channels. Up to 29 different effects depending on the chosen number of channels (pre-programmed in the controller). Each effect can be repeated from 1 to 10 times independently of one another. Adjust speed for effects.

Specifications:

- PIC microcontoller - PIC16F628A.

- Select a channel to be used – from 1 to 10 channels.

- Choice of effects that will appear – depending on the selected numbers of channels.

- Choice of repetition for one effect – from 1 to 10 times for each effect.

- Power DC 8 to 18V. LED module ready for DC 12V. Current depends on the number of used LED module (LEDs).

- Maximum total current – 10A (1A per channel).

- Two programmable buttons SB1 and SB2.

- One button RESET SB3 – restore factory settings (10 channels, all 29 shows the effect).

- Trimmer-potentiometer R1 for regulating the speed of the effects.

- Possibility for upgrade of effects saved – by changing the eeprom 24Cxxx.

- Overall dimensions PCB - 134mm x 68mm (5.28" x 2.68").

Number programmed effects in the controller:

- One channel - 2 effect.

- Two channels - 5 effects.

- Three channels - 16 effect.

- Four channels - 19 effect.

- Five channels - 20 effect.

- Six channels - 21 effect.

- Seven channels - 21 effect.

- Eight channels - 25 effect.

- Nine channels - 27 effect.

- Ten channels - 29 effect.