This is a fully assembled AVR USB device which, in our opinion, is a much better development board than most on the market! Why?
- Based on Atmel ATMEGA32U2:
-
32kB of memory...twice the code space of the commonly available AT90USB162!
- FULL code compatibility with AT90USB162 (no need to recompile hex if you don't want to)
- on-board bootloader means the device can be reprogrammed at anytime without a separate programmer.
- Design isn't stripped down to bare-minimum components which can and
will cause stability issues in the long run like we've seen with many
other Atmel USB boards. Note the following features of NooGroove:
-
2oz copper PCB
- Gold PCB Finish (ENIG)
- HIROSE USB Ports
- X7R Ceramic Capacitors
- ESD Protection
- Designed and fabricated COMPLETELY in North America
- Two separate buttons means the USB stick can be reset and sent into programming mode independently.
- Buttons are full-size so there is no fiddling around with tiny little switches.
- Two LEDs; one red for power and one green for status--no more guessing if your code is running!
- Small board size (about 1" x 1.5")
- Breakouts to 0.1" on side panel means easy access to the IC pins and interoperability with almost all breadboards and stripboards
- Open source! Schematics, Gerber files and full documentation will be
publicly available for those who want to make their own! Designed in
conjunction with Micropendous
- Excellent support!
As always if you have any questions or concerns contact us anytime!
No refunds or exchanges on this item, but your board is still guaranteed against DOA.
|