SHUTTLE COCKPIT EASY UP WALL MURAL This easy-up mural features a NASA shuttle cockpit, ideal decor for your aspiring astronaut! Printed in one piece on premium heavy-weight eco-friendly material! Colorfast with incredible colors! Installs easily in minutes with removable adhesive tabs! Moveable and reusable! With care, this mural can be removed and repositioned to a new location! * No tools or trimming required. * Safe for walls; removes in minutes. * Completely movable and reusable. Made in the USA. Please allow up to 10 business days for production in addition to the shipping time. Thank you. MURAL APPLICATION & CARE Wall Preparation: Murals may be applied to any dry, clean, smooth surface. Old wallpaper or other surface materials should be removed before application. Fill cracks with a spackling compound or plaster patching and sand to a smooth surface. Glossy or enamel finish walls should be lightly sanded, then washed with a common household detergent and then allowed to dry completely. Any greasy surface should be cleaned with a strong ammonia solution and then allowed to dry completely. For drywall preparation countersink all nail heads. Tape or repair all joints or holes using joint tape or a wall patch and joint compound and then let dry. Sand the wall to a smooth finish. Prime all new drywall with a wallpaper primer/sealer and follow primer instructions for the dry time (normally 24 hours). Apply sizing to walls and let dry. Avoiding Show-Through: If the walls to be covered have highly contrasted colors or white patches on dark wall, lining paper should be applied to avoid show-through. Instead of lining paper, you may also prime over the contrasting areas until the entire area has a uniform color. Dealing with Mold or Mildew: Any area with mold or mildew should also be prepared before application. Wash any mold or mildew areas with chlorine bleach (1cup Clorox® to 3 quarts water). Rinse clean and then let dry. Cleaning Sponge-clean your wallcovering. Use a lukewarm, mild detergent solution. Do not use abrasive cleaners containing chlorine bleach, solvents, or ammonia as they may attack and damage the printed surface.