.

A DIVISION OF BUSHKILL CARDS AND GAMES

Specializing in Premium Custom Diecast Police Models & Flashing Lightbars Since 2008
.

MULTI-PATTERN "EMERGENCY VEHICLE" FLASHING LED KIT FOR DIECAST MODEL CARS

  If you've been searching for high quality, professionally assembled lightbars that are easy to install into your diecast model without having to splice wires and solder them back together, you've come to the right place! Don't be fooled into buying those cheaper lightbars from the other sellers thinking they are the same quality as ours! With the exception of our 1/24 scale lightbars and our 1/18 "economy" lightbars, our lightbars feature both FRONT AND BACK facing LEDs, which means they are brighter and more realistic - most of our competitors' lightbars do not!

   FEATURES OF THIS KIT: (DIECAST MODEL NOT INCLUDED)

• Fully assembled as shown in the picture and ready for installation into your model - no soldering necessary!
  
  
• Includes 12 bright, long lasting LED bulbs, pre-wired to mount in a 1/18 scale Crown Victoria, attached to the circuit board. These LEDs can be installed throughout your model (suggested mounting locations listed below)! The LEDs themselves also provide more then one function, so you're getting the equivalent of 16 LEDs with only 12 - which means less wires to run and an easier installation!
  
  
• Operates on a 9V battery (not included)!
  
  
• Uses our Strobe 3.0 circuit board (measures approximately 1" x 2 3/8" x .5") to create 3 custom flash patterns or "modes" to simulate real emergency vehicle lighting!

• Features a master push button on/off switch to turn the flasher on and off PLUS a second push button switch to change the flash pattern/mode!
  
  
• Ready to install into ANY brand or type of model, no wiring or soldering skills necessary, this kit is fully wired and assembled! All you need to do is drill the holes in your model where you want to mount the LED bulbs and glue them into place! Suitable for 1/14, 1/16, and 1/18 but can also be used in 1/24 and 1/43 scale models if you mount the flasher externally!
  
  
• MODE #1 - STEADY BURN - This pattern is to emulate a vehicle when it has its headlights on. As such, for this pattern you'll have one pair of steady burning 3mm white LEDs (the ones you have installed in your headlights), a pair of steady burning 3mm red LEDs (the ones installed in your taillights), and a pair of steady burning 3mm amber LEDs and tiny chip amber LEDs (these are installed in your headlights and corner markers on the Crown Vics).
  
  
• MODE #2: NIGHT TIME EMERGENCY MODE - This pattern simulates the vehicle being in "emergency mode" at night time when you'd still have steady burning headlights, taillights, and amber parking lights. When this pattern is active, the white LEDs in the headlights steady burn but with an added twist, they wig-wag (alternate flash) at a brighter intensity just like the high beams would flash brighter then the regular headlights in a real emergency vehicle! The rear taillights also have a strobe override effect and the pair of 3mm white LEDs in the reverse lights also strobe flash. The four amber LEDs (parking lights) remain steady burning and the tiny chip white LEDs installed in the corner markers with the tiny chip amber LEDs flash in a strobe effect!
  
  
• MODE #3: DAY TIME EMERGENCY MODE - This pattern simulates the vehicle being in an emergency mode during the day when you wouldn't have the headlights and parking lights on. In this pattern, the headlight LEDs wig-wag, the taillights, reverse lights, and white LEDs in the corner markers strobe flash! There are no steady burning LEDs active.
  
  
• SUGGESTED MOUNTING LOCATIONS OF LEDS:
• Pair of 3mm White LEDs - Headlights (outer spot of the headlights on Crown Vics)
• Pair of 3mm White LEDs - Reverse lights
• Pair of 3mm Red LEDs - Taillights
• Pair of 3mm Amber LEDs - Inside running lights (inner spot of the headlights on Crown Vics)
• Pair of chip Amber LEDs - Running lights (side corner markers on Crown Vics)
• Pair of chip White LEDs - Anywhere you want a hidden strobe (side corner markers on Crown Vic

• See the images for installation instructions.
• NOTE: Since apparently this needs to be in print to be clear, this listing is for a lighting kit only. The diecast model car shown in the picture and in the video is NOT included.

   CUSTOM COLOR SCHEMES:

   The "stock" version of this kit comes with the colored LEDs specified above. We can substitute other color LEDs in your kit to your specifications if you contact us after purchasing (send us a message through ebay for confirmation or we may not see your requested color change). This may create a 5-10 day delay on shipping your kit.

   VIDEO OF THIS LED LIGHTING KIT:

    Checkout the video below to see an example of how this kit would look installed in a Crown Vic!

www.youtube.com/v/gRiX53jgyus

PLEASE BE SURE TO READ ALL OF OUR POLICIES LISTED BELOW FOR AN INFORMED AND PROBLEM FREE PURCHASE!

• We are a brick and mortar retail store with full time business hours and full time staff! We are not a one man operation working from a basement or garage!
• We have been in the retail business for over 15 years and have been producing diecast model products for over 5 years! We know the business and we have the experience to make your purchases with us go smoothly.
• We pride ourselves in our professionalism and attention to customer service. Below you will find a LOT of information regarding all of our policies, this is to ensure that you have a positive buying experience from us by being fully informed.
• We strive for quality and if you feel that the product you receive from us is not top notch quality, please contact us and we will work with you to correct it!

With every sale we make, we remember that YOU keep US in business!

1) Shipping Costs: We charge actual USPS shipping rates based on the delivery address and weight of the package. Please use the ebay shipping calculator to calculate the cost of shipping for this listing. There is also a small "handling" charge sometimes added in which covers the cost of the bubble mailer envelopes, foam peanuts, bubblewrap, boxes, and any other supplies needed to safely ship your purchase to you.

2) Tracking: For domestic shipments (shipments to US addresses), the shipping cost provided by the shipping calculator includes the cost of Delivery Confirmation (for values under $200) or Signature Confirmation (values over $200). For international shipments, full tracking from our door to yours is only available if you select Priority Parcel as your shipping method; 1st Class and Flat Rate Priority mail options only include tracking that shows when we shipped it, see "Insurance" below for additional information.

3) Combined Shipping Discounts: We do combine shipping and the discount is applied automatically during checkout. Since we charge actual shipping based on the weight of the package, the calculator will add up the weight of every item in your order and then provide you with the shipping cost. If you would like to know what the shipping cost will be for several items, we can provide you with an estimate if you email us, but the amount provided by the automated shipping calculator (unless adjusted by us at the time of invoice) supercedes any estimates provided by phone or email.

4) Insurance: For domestic shipments (shipments to US addresses), insurance is generally optional. For some unique items or high value items, the cost of insurance will already be added into the shipping costs provided by the ebay shipping calculator. If you would like your item insured, please contact us and we will adjust your invoice. For international shipments, insurance is required regardless of value and is already added in to the shipping cost provided by the shipping calculator. Insurance protects both you and us from lost or damaged packages. The only exception to this policy is shipments that are fully trackable (Priority Parcel), in which case they are not insured. PLEASE CONTACT US PRIOR TO FILING A NON-RECEIPT CLAIM THROUGH EBAY OR PAYPAL!

5) Packaging: The way your order is packaged is based on the shipping method you chose during checkout. In general, listed below is a description of how your order will be shipped based on which method you choose:

     1st Class: Your order will ship in a padded bubble envelope. Please note that this is the slowest shipping method and for international customers, can take up to 30 days to arrive.

     Priority Flat Rate Box: Your order will ship inside of a small box, with or without peanuts depending on how much space is available inside the box after putting your item(s) in it.

     Priority Parcel: This is the best and most recommended shipping method. Your order will be packed inside of a sturdy box with plenty of peanuts around it to protect the item(s). This is also a very fast shipping method and the best shipping method for international customers as its fast (usually arriving in under 10 days) and has full tracking to your door so you know where the package is.

6) Customs Fees: For international shipments, we mark the customs forms as "Gifts" and we mark the full value of the order (purchase price + shipping cost). This is non-negotiable and per ebay policy, we are not responsible for any import taxes you incur to receive the shipment from us. Please be aware of your country's import laws prior to purchasing from us. We mark the full value for insurance purposes and if your package is lost or damaged, we are able to recover the full amount (including the shipping costs) from our insurance provider.

7) Payment Terms: We ask that you please pay within 7 days of your invoice. If not paid within 7 days, we generally send out a payment reminder and if the item is left unpaid when it becomes eligible for a final value fee credit, your order will be cancelled. If for some reason you need additional time to pay, please contact us and we will be happy to work with you.

8) Return Policy: We accept returns on "stock" products only and only if they are in working order, have not been installed, and have not been damaged. We do not accept returns on custom products (i.e. custom color schemes) since we built it specifically for you and it is unlikely that another customer will want the same lightbar. If we accept an item for return, you are responsible for the original shipping charges as well as the return shipping charges (unless we made an error, in which case we will cover the shipping charges) and the remaining balance of the purchase price will be refunded upon the safe return of the product.

9) Photos and Videos of the Item: We try to post the best possible photos and videos our products to properly represent them. Sometimes though temporary or permanent changes are made during production to enhance the product or substitute for components that may no longer be available. The functionality of our products however will remain the same. For this reason, the wiring, switches, battery, etc. that is shown in photos/videos may look a bit different then the wiring for the actual lightbar you receive.

10) Item Availability: All "stock" products (or products that are the default color scheme shown in the video/images) ship within a couple business days. Custom products (such as when you request changes to the colors or painting) must be produced from scratch and fit into our production schedule. For that reason, shipment of custom products can take up to a week.

11) Limited Warranty: We provide a 30 day warranty on all of our products. When you receive it, please test it immediately for proper operation before installing it. If it is malfunctioning, please contact us. If after installation and within 30 days of receiving it, it begins to malfunction, please contact us. We will ask you to return the product to us for repair or replacement. This warranty only covers manufacturing defects and does not cover misuse by you (such as trying to re-wire it and exposing it to a higher voltage then it is designed for), damage caused by you during installation (rough handling that causes anything to break or wires to rip off), or any other problem that would not be considered a manufacturer defect.

Since the beginning, we have produced some of the most technologically innovative 1/18 scale models and lightbars in existence.We offer many custom services including flashing lightbars, police cruisers with lighting packages, and custom agency decals. Our products and services are designed to be available to everyone no matter how large or small their budgets, from simple basic models to the most premium models possible. We continue to strive to bring our customers the highest quality and most realistic scale models ever made.

In 2011 we opened a retail location and have a group of full time staff that produce the products that we sell!