Mode

H1: Maximum flow fixed-made stream mode

H2: 75% of maximum flow rate

H3: 50% of maximum flow rate 

L: 1/3 of the maximum flow fixed flow made ​​to flow mode

W1: classic mode of making waves (Wavebox Function)

Different type of the tank need to apply different type of the setting:

Adjustable the controller on the wavelength is sameas the Tank Size(Long), when the Wave same as the Tank Length is suitable. Revise the clock button as you need to reduce the wave. When change the setting require at least 10mins to verify if you change the controller button. Watch and try to adjust the best wavelength on your tank

With "speed/Lock", chose S1, S2, S3 for W1 mode to select the size of the wave

W2,W3(Reef Stream Mode with Adjustable): ordinary fixed program made ​​stream made ​​wave mode;

This two modes by means of the knob to change the the fixed program's effect, need to be adjusted according to the creatures in the water

W3(Reef Stream Mode): Indefinite program cause stream made ​​wave mode;

According to the aquatic adjustment knob to change indefinite program effects;

Else: Random mode

Feeding Mode : Press the "FEED" button once, "10min" (blue lights) stop the wavemaker after 10 minutes made ​​waves pump start again. Or direct press the Feed button to back to Normal

Lock knob parameters function: long press the "FEED" key until the "LOCK" red indicator light already locked knob parameter adjustment knob does not change the wave shape. The purpose is to prevent wave after a good tune(Save setting), inadvertently knob again to change the wave-shaped. To unlock to tune waves, long press the "FEED" key until the red indicator light is off you can;

Night Mode (Add one function): It's have a sensor on the controller. When you connection to the night sensor on the controller, it will Add on night mode function

When it dark detect with sensor, it will slow down all the stream on the controller mode function, with a half of the power operation.