Universal Stainless Steel
DIY Wire Repair Kit with
Comprehensive Instructions
for:
Front & Rear Window Regulators

This kit is suitable for all regulators designs
with 3 distinct control wires and 2 slide rails:

(M=Motor, X & Y=Glass-Carrying Track Sliders)

Suitable for units with fixed or floating motors.
Suitable if red, blue (or both) wires are broken.
Suitable for units mounted on inner door plates.
Suitable for units with or without outer cables.

Fits either side, left or right
Fits front or rear
Fits electric or manual regulators
Fits units with one-touch operation (comfort)
Fits units with anti-pinch operation

eBay UK member since January 2001

Also available:

Click here for other Model Specific DIY kits.
Click here for Universal DIY kits.
Click here for Custom Made Wires.
Click here for our Universal Repair Tool Kit:

.. and drive your cost per repair as low
as £2.70 (full re-wire).
(Tool Kit quickly repairs ANY control wire unit.)

If your window regulator has control wires
- we've got a solution to replace them!

Key advantages of this kit.

Outstanding quality, instructions & service:
Designed & manufactured in the UK
using only the finest quality materials
- backed by a LIFETIME WARRANTY.

Outperforms the expensive original equipment unit:
Stainless steel wires provide a permanent solution.
(A new or used regulator will simply fail again.)

Retains the benefits of the original equipment unit:
Perfect fit - no compatibility issues.
High quality motor re-used.
Original anti-rattle*, lined* outer cables re-used.
(Ensures quiet, smooth operation & long life.)

(some regulators have no outer cables)

Comprehensive colour illustrated instructions:
(See sample pages below.)
Include a step by step example for you to follow.
Essential if you've not repaired one before.

Complete DIY package - no special tools needed:
Silicone grease also included.
(Oil based grease weakens the plastic parts.)

Exceptional customer service - UK based:
If you have any questions or need advice
simply call us on 01573-238136.

Cost effective & environmentally sound:
Replaces only failed components.
Permanent solution.

This kit contains 3 part-made stainless steel wire sections. (See bottom of picture at top left of this page.)

These replace all the wire on the regulator.

The pre-formed stop end fittings on these wires fit all wire reel designs.

One of the pre-formed wires has an optional cover piece. (See bottom of picture at top left of this page.)

Where fitted - the original premium quality outer cables (with liners & anti-rattle protection where required) are re-used.

3 x standard, 1 large and 2 x spring retaining stop ends are also supplied. (See top of picture at top left of this page.)

The stop ends are locked in place with fast setting engineering grade adhesive. (Professional adhesive kit also included).

Set the adhesive in minutes - providing a joint that's stronger than the wire itself (see FAQ link below for independent destruction testing).

Silicone grease included (required as oil based grease weakens the plastic parts).

Use this kit on your existing unit - the wires on a new regulator will corrode & fail again.


No special tools are needed.

The illustrated guides cover the regulator repair comprehensively & include a step by step example for you to follow. (Sample pages above.)

Instruction guides are supplied via e-mail link with confirmation that your order has been posted.

This kit is for one window.


Click here to see the answers to some Frequently Asked Questions and independent destruction test results.
We offer a generous returns policy on "Buy It Now" items. If you're not completely satisfied, simply return unused for a full refund of the price you paid. (See "Returns Policy" section at foot of page.)

The kit components are covered by a lifetime warranty. (Non-transferrable.)

International Patents Applied For PCT/GB2009/000139 & PCT/GB2011/000212.

Add as a Favourite Seller!