3 wheel: Outlaw Extended Wheelbase 

The YouTube video of the time trial:

https://youtu.be/zz5eu944HNo

This car averages 2.9315 on a 42 ft best track.  

The 10 heats:

1. 2.9385

2. 2.9335

3. 2.9359

4. 2.9366

5. 2.9282

6. 2.9286

7. 2.9281

8. 2.9319

9. 2.9287

10. 2.9254

I have recently upgraded to a wireless remote starting gate which gives more accurate and consistent time trials.

THIS LISTING IS FOR A 3 wheel car

• All cars, wheels, and axles are made from the official BSA kits.

•comes with graphite and brush

• Tungsten weighted (No Lead): 4.975 oz

• 3 wheels are touching

• The wheels are RSX razor 

• a guide fin serves in place of the high wheel, thus allowing the extra weight to be utilized for extra speed in the tuning process

The axles have been straightened and deburred to a 2000 grit finish and sealed with a dry lubricant. 

The wheelbase is Extended 

The COG (center of gravity) is 0.8618"

 

 The length of this car does not exceed 7" and is in compliance with BSA rules and regulations on body length

 The overall width of the car does not exceed 2 3/4" and is in compliance with BSA rules and regulations on car Width

 The car has a minimum clearance of 1 3/4" between the wheels and meets BSA rules and regulations

 The car has a 3/8" clearing underneath the body so it does not rub on the track and meets BSA rules and regulations 

The rear axles are cambered at a 2.5 degree bend to allow the least amount of wheel tread to make contact with the track, thus reducing friction. 

The steer axle is set at 1.5 degrees and the cars average 3.5-4" of drift on a 4ft tuning board.

I have made almost a thousand pinewood derby cars in my lifetime. If you have any questions, comments, or requests, feel free 

We use 100% plant-derived, renewable, and naturally biodegradable shipping tape from ECOENCLOSE. Our wrap is made from 100% recycled materials and is completely compostable.