UPA USB & UPA USB-S Programmers (As Sold By www.elrasoft.eu) - Dongle & Programming Lead Set

*Update January 2015* - Using the new UPA USB-S programmer and our UPA Lead Set you can now read & write JTAG devices such a Infineon, ST and Motorola used in late model airbag ECU's!

*Update June 2014* - Our UPA Lead Set works with both the original UPA USB programmer and the new UPA USB-S programmer!

For sale here we have a lead, clip and dongle set for the fantastic UPA USB device programmers. This lead set is designed and made by us and will allow full function of the UPA USB (and UPA USB-S) as regards to the reading and writing of Motorola MCU's and Serial EEPROM's. The set consists of the following:

1) 24Cxxx and 95xxx EEPROM dongle - This dongle fits between your UPA USB programmer and our supplied 8 Pin SOIC lead so that you can read and write these devices.

2) 93Cxx EEPROM dongle - 

This dongle fits between your UPA USB programmer and our supplied 8 Pin SOIC lead so that you can read and write these devices.

3) 35080 EEPROM dongle - 

This dongle fits between your UPA USB programmer and our supplied 8 Pin SOIC lead so that you can read and write this device.

4) 24Cxxx 4 Wire Dongle - A dongle that isolates only the VDD, VSS, SDA & SCL lines of this type of EEPROM to help with in-circuit reading and writing.

5) 95xxx, 35080 and 93Cxx In Circuit Dongle - This world first dongle is designed by us and is used along with the other supplied device dongles,  clips and leads to allow in-circuit reading and writing (in virtually all cases) of these devices. This is a very useful dongle that really makes the UPA USB programmer usable in most real world situations.

6) EEPROM Open Ended Lead - Used for reading and writing EEPROM's where it is not possible to clip directly onto the device. Usually you will solder to various points on the target PCB.

7) Standard 9 Open Ended Lead - Used for reading and writing of Motorola MCU's (912, 9(s)12, 908 etc etc).

8) 8 Pin SOIC Test Clip Lead - Used to clip directly onto the various EEPROM's for reading & writing.

Full instructions are provided. For more information please call 07870-903552.

Please note that you are NOT buying a UPA USB or UPA USB-S programmer, only the dongle/lead/clip set to use with it as detailed above.
A UPA USB or UPA USB-S Programmer is required to use the set!