SWITCHGLO PRO - The SMART WAY TO GLOW.

This Unit is the LATEST Version 7.    It is Superior to V6.
These are Brand New Units still sealed from Factory.

Transmitter Controlled, OnBoard Glow Driver, Eliminate Pocket Glow Starters.
The Ultimate Protection against Dead Sticks - Prop Nicks - Hot Starts - Walk of Shame.
Works off the Receiver battery. Eliminates need for a separate Igniter battery.
If you have any questions or ?  drop me a note : anandrx@msncom
I use these on my warbirds and other Nitro planes too.

Please Note:
 This Listing is for the Alligator connection to Glow Plug. See Pictures.
I also have a separate listing with the Twist On Connection which is $ 4 more.


See my Excellent Rating as a Seller...... Buy with confidence.
   If you have any questions please contact me at anandrx at msncom
   I will respond promptly.
  Thanks for viewing my listing.




How it works:   SwitchGlo Pro simply plugs into a receiver channel, then to your glow plug.  You assign a transmitter toggle switch to this SwitchGlo channel, and toggle your glow on and off, at startup or inflight.

You can program mix SwitchGlo just as you can program mix any servo on your craft, allowing you to utilize your glow in ways you never thought possible!
Low Throttle glow activation is achieved by programming your TX to activate the SwitchGlo channel at any throttle position you desire. You can further enhance your Low Throttle mix by assigning a toggle switch to activate the mix, thereby forever preventing "Hot Starts"

Know when you glow! - SwitchGlo will  Beep the entire time your glow plug is glowing, providing reassurance that the Plug is Glowing.
 SwitchGlo helps you diagnose starting problems; a single beep from SwitchGlo signals the glow/ground loop is open, most often indicating your glow plug is spent.
 This feature greatly reducing your troubleshooting efforts.


Technology:   SwitchGlo Pro is an Intelligent and Highly Efficient on-board glow driver.
  Its state-of-the-art voltage adaptive algorithm optimizes the power transferred from your battery pack to your glow plug providing the ideal glow.
 Outfitted with low power components, switched-mode voltage regulation and adjustable firmware, SwitchGlo is not your conventional on-board glow system.

Other on-board glow systems use linear regulators that waste power  and operate at dangerously high temperatures.  These linear glow drivers also suffer from low glow at lower pack voltages, while SwitchGlo gives a strong and consistent glow from 4V - 9V.
Combining the benefits of switch-mode voltage regulation and the smallest footprints on the market, SwitchGlo Pro is the Most Advanced way to glow.



Because SwitchGlo is controlled by your Transmitter, it can be program mixed like any servo,
so it can be activated to turn on at 1/4 Throttle or less, for inverted 4 Stroke engines for example, which tend to quit on low throttle.
 Prevents a dead stick landing or a crash.


 Promote SAFETY : Eliminates Pocket Glow starter so no need to get hands
                                    near the Spinning Propeller once engine has started.
        AVOID INJURY and MEDICAL BILLS which could put me out of commission,
       and cost me more than all my planes are worth.
     As long time flyers we become complacent to Propeller Safety,
     so I think this feature is invaluable and cheap protection to help avoid a prop strike.


- Compatible with all Transmitter/Receiver combinations
- Works with any existing On-Board Receiver Battery from 4V to 9V
- Ultra Efficient Pulse Width Modulation Technology
- Very Low power usage :  Uses less than 4 mA per 12 second glow.
- Toggle glow ON and OFF at Start-up or In-Flight
- Know when you Glow with audible and LED indicators.
- Defective glow plug ?   The unit will give a single beep, to alert you.
- Audible beep doubles as a Lost craft locator.
- Auto activate at Low throttle with Transmitter Mix.
- Eliminate Hot Starts with TX program mix.
- Activate for 12 / 24 / 36  etc. seconds glow with Auto Shut off as desired.
- Built in Servo Reverser for "Y" harness compatibility.
- Epoxy filled for durability, Waterproof, and Vibration Resistance.
- Latest Version 7 Firmware. Just came in.
- Easy Installation, Light Weight of 25 grams
- Comes with Free Alligator connection to the Glow Plug head.

- These are Brand New units still Factory sealed, with Instructions included.
- Designed and Assembled in USA.    Shipped from USA.


Dimensions
1.587" x .720" x .590"
8" receiver cable
8" pigtail (Alligator )
 
Weight
19 grams
25 grams with pigtail
 
Input/Output
SwitchGlo Pro: 4V - 9V input
Output Power: 4.8W (OS-8 Plugs)
 
Frequency Compatibility
27 MHz BD21301_.gif 35 MHz BD21301_.gif 36 MHz BD21301_.gif 41 MHz BD21301_.gif
50 MHz BD21301_.gif 72 MHz BD21301_.gif 75 MHz BD21301_.gif 2.4 GHz BD21301_.gif
Any other frequencies un-tested
 
Power Consumption
MCBD21298_0000%5B1%5D.gif 0.44mah per second of glow time
MCBD21298_0000%5B1%5D.gif 2.2mah per 5 seconds glow (average start)
MCBD21298_0000%5B1%5D.gif 4.4mah per 10 second glow (auto shut-off)
MCBD21298_0000%5B1%5D.gif 33mah to start craft for a typical 15 flights per charge
MCBD21298_0000%5B1%5D.gif Over 2300 average glows on a 5200mah battery (assumes no other battery draw)
    Glow plug average current draw measured at 1.5a



Engineering
SwitchGlo is designed by Zdatum Corporation, the same engineering firm to provide circuit design for projects within the Space Shuttle, Mars Probe, AH-1Z Cobra Helicopter, B1 Bomber, and numerous other military, commercial, and medical applications. The SwitchGlo Pro circuit has 31 components including an anti-interference circuit effectively eliminating any and all servo chatter caused by igniting the glow plug. SwitchGlo utilizes a programmable micro controller enabling a custom source code to control the glow efficiency as well as control other key features.
 
Pre-Production Testing
SwitchGlo beta units were given to 30 R/C Helicopter, Airplane, and Truck enthusiasts and professionals,
a few years ago.
We estimate a pre-production SwitchGlo usage time of 360 flight hours. During this time, we collected surveys from each beta tester, providing us with detailed opinions of product perception, performance, features, size, weight, and price. The survey responses exceeded our expectation. All beta testers were extremely happy with SwitchGlo in all respects except size and weight. In our final production design, we reduced both size and weight by half. Those same beta units are still in use and performing very well.

Since then many Thousands have been sold and are in use everyday with no problems.
They are now being used in 20+ countries.
 
  See my Excellent Rating as a Seller...... Buy with confidence.
   If you have any questions please contact me and I will respond promptly.
  Thanks for viewing my listing.