This mixer was only used for one show. (Im only selling because we have hired a sound guy who is using his own gear and secondly Im not a sound guy  this board deserves a person who can appreciate just how good it actually is and use it for just that reason)  Excellent condition/ always kept in road case (NOTE road case not included!). Packed in original shipping box. note..... i WILL only ship to continental USA nothing outside sorry! 
Packaging Info
Package Weight 42.5 lb
Box Dimensions (LxWxH) 28.0 x 24.5 x 12.75" 



 MANUAL ON LINE Faders 17 Mixer Input Channels: 40 (32 mono + 2 stereo + 2 return) Aux Buses: 20 (8 mono + 6 stereo) Stereo Buses: 1 Sub Buses: 1 Input Channel Functions: 8 DCA Groups I/O Inputs: 16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) Outputs: 16 (XLR) Expansion Slots: 1 DSP 8 effects + 10 GEQ USB 34 x 34 USB audio interface, 2-track recording via USB storage device Sampling Frequency 48 kHz, internal Signal Delay Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Faders 100 mm motorized, resolution = 10-bit, +10 to -138 dB, -∞ dB all faders Total Harmonic Distortion Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 ohms, INPUT to OMNI OUT, input gain = min. (measured with a -18 dB/octave filter @ 80 kHz) Frequency Response +0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OMNI OUT Dynamic Range 110 dB typ., DA converter, 107 dB typ., INPUT to OMNI OUT, input gain = min Noise Equivalent Input Noise:-128 dBu typ., input gain = max. (measured with an A-weight filter) Residual output noise:-85 dBu, ST master off (measured with an A-weight filter) Crosstalk -100 dB (measured with a -30 dB/octave filter @ 22 kHz), adjacent INPUT/OMNI OUT channels, input gain = min Power Requirements 100 - 240 V 50/60 Hz Power Consumption 100 W Analog Inputs Input Terminals: INPUT 1-16, ST IN 1,2 GAIN: -6 dB / +66 dB (INPUT 1-16) Load Impedance: 7.5 kOhms (INPUT 1-16); 10 kOhms (ST IN 1,2) For Use With Nominal: 50 - 600 ohm mics or 600 ohm lines (INPUT 1-16); 600 ohm lines (ST IN 1,2) Sensitivity: -82 dBu (61.6 V), -10 dBu (245 mV) (INPUT 1-16); -30 dBV (31.6 V) (ST IN 1,2) Nominal: -62 dBu (0.616 mV), +10 dBu (2.45 V) (INPUT 1-16); -10 dBV (316 mV) (INPUT 1-16) Max. Before Clip: -42 dBu (6.16 mV), +30 dBu (24.5 V) (INPUT 1-16); +10 dBV (3.16 V) (ST IN 1,2) Connector: Combo Jack (XLR-3-31 type or TRS phone) balanced (INPUT 1-16); RCA pin jack unbalanced (ST IN 1,2) Analog Outputs Output Terminals: OMNI OUT 1-16, PHONES Source Impedance: 75 ohms (OMNI OUT 1-16); 100 ohms (PHONES) For Use With Nominal: 600 ohm lines (OMNI OUT 1-16); 40 ohms (PHONES) GAIN SW: +24 dBu position (default) (OMNI OUT 1-16) Nominal Output Level: +4 dBu (1.23 V) (OMNI OUT 1-16); 3 mW (PHONES) Max. Output Level Before Clip: +24 dBu (12.3 V) (OMNI OUT 1-16); 75 mW (PHONES) Connector: XLR-3-32 type balanced (OMNI OUT 1-16); stereo phone jack (TRS) unbalanced (PHONES) Digital Input/Output Terminals: USB (TO HOST), iPad Format: USB Data length 24-bit (USB TO HOST) Audio: 34 ch input / 34 ch output, PCM (USB TO HOST); Playback: MP3 or WAV file data / Record: WAV file data (iPad) Connector: USB (B type) (USB TO HOST); USB (A type) (iPad) Control I/O Terminals: NETWORK, FOOT SW Format:IEEE802.3 (NETWORK) Level: 10BASE-T/100Base-TX (NETWORK) Connector: RJ-45 (NETWORK); TS Phone (FOOT SW ) Dimensions 20.1 x 8.9 x 23.6" (510 x 225 x 599 mm) Net Weight 29.8 lb (13.5 kg)
Packaging Info
Package Weight 42.5 lb
Box Dimensions (LxWxH) 28.0 x 24.5 x 12.75"