This motor has the correct RPM and air volume output for Quadrafire pellet stoves. It is a "Plug & Play" set-up. It comes with the correct size and length of wires
and terminations, so you don't have to mess around with cutting wires
and crimping ends on them. It comes with the external cooling fan
(umbrella fan) for the motor, a new mounting gasket and basic instructions. This replacement
blower motor assembly is specifically made to replace the Quadrafire
models listed below. It is virtually identical to the original motor,
except it is Made in North America instead of China.
With
this "Quick Change" style you will reuse your existing blower housing,
so in many cases you do NOT need to disconnect the exhaust vent
connection. (Check existing clearances for removing motor). If you do
not need to disconnect your exhaust vent, this replacement can install
in about half of the time that it takes to replace the complete Blower
housing model. There are 6 screws in the mounting plate to
remove-reinstall and 2 wires to disconnect-reconnect.
Quadrafire uses a
lower RPM motor than most other manufacturers and their impeller (fan)
blade is also different. They use a 9 bladed 4-7/16" impeller, which is
much different than the larger 12 bladed 4-3/4" impellers used on many
other stoves. Be aware that there are many so
called "Universal" motors being sold here on eBay and they can probably
bolt up to your Quadrafire, but it is also highly likely that the air
performance with them is going to be considerably different because they use a higher RPM motor and a larger impeller blade.
ITEM:"Quick Change" Exhaust Blower Motor Assembly
Ceramic Gasket Replacement
Impeller Blade 4.4"
6" Mounting Plate with 2 sets of mounting holes
All assembled (See pictures)
NOTE: Dimension from mounting plate to the rear of the external motor cooling fan blade is 3-7/16".
The
"Universal" style of motors being sold that are similar to this were
designed for other stove makes. Although they could bolt up
satisfactorily, THEY ARE typically LONGER (4" - 4-3/8") than this
motor and on some models of Quadrafire could interfere with your
ability to close the side panels on the stove. This blower/motor is designed specifically as a Quadrafire replacement.
Replacement Motor, Impeller & gasket replacement for Quadrafire 812-4400 blower
MOTOR SPECS:
115 Volts - AC
AMPS - 1.0
RPM - 2900
2- Male Spade terminal leads exiting the motor wires.
1- Ground wire on motor
Ball bearing motor (Doesn't require oil)
Made by FASCO in North America
5/16" dia. stainless steel shaft
APPLICATION:
Quadrafire®
- Contour
- Castile
- Sante Fe
- Sante Fe B
This motor is different than the replacement for the For 1200 Classic Bay models.
For Classic Bay - 1200 models, see this ebay item: 161179927902
Will also work on some other Pellet Stove Makes & Models
CONDITION:
Brand New in the original box! This
item is virtually identical to the OEM part that sells for more $$ and
this one comes with a hi-temp white ceramic mounting gasket.
WARRANTY:
There is a 1 year warranty on this motor, from the date of purchase. Warranty can be filed online if needed.
USA SHIPPING:
In order to help hold your costs down, we
use economy shipping which can take up to 10 working days (14 calendar
days) to arrive. If you are going to need this item sooner, you will need to
choose an upgraded shipping option, which will result in an increase
with the shipping costs.
--> ECONOMY -FREE
- You should get your item within 3-10 working days after it is shipped. Shipping by FedEx Ground-SP or USPS Parcel Select with tracking. NO PO BOXES. NOTE: DO NOT RELY on the automated delivery time estimates by ebay. We have found them to be highly inaccurate and misleading!
Average delivery working days for ECONOMY shipping starting the day AFTER the item ships:
WESTERN States = 3-4 DAYS
MID WEST States = 4-7 DAYS
EASTERN States = 5-10 DAYS
NEW ENGLAND & SE States = 7-10.
If you need your item sooner than this, you will need to choose one of the Shipping methods below.
--> EXPEDITED -$4.95- You should get your item within 2-4 working days after it is
shipped. EXPEDITED Shipping by USPS Priority. PO Boxes accepted
--> EXPRESS -$45.00 - You should get your item within 1-2 weekdays after it ships. NOT GUARANTEED
. Shipping is by USPS Express with tracking. NOTE:
Regardless of what USPS and eBay says, it has been our experience that
USPS Express usually takes 1-2 weekdays to deliver, NOT COUNTING THE DAY THAT IT SHIPS and occasionally longer. *We do not recommend USPS EXPRESS if you live
in rural and/or remote areas or do not have a major city
(transportation hub) nearby. In these cases, we recommend Priority. In many cases, Priority will get it there just as fast. We will not refund EXPRESS costs if USPS Express doesn't get it to you when you think they should.
--> 2nd EXPRESS -$50.00 - You will get your item within 2 weekdays after it ships. FedEx 2nd Day Guaranteed. (Order must be received by Noon PST to ship same day. Weather permitting.)
CANADA SHIPPING:$24.95 - Economy shipping via USPS First Class International with tracking. Transit time: 7-21 working Days.
$32.95 - Expedited shipping via USPS Priority International with tracking. Transit time: 5-15 working Days.
Canada
buyers are responsible for all duties, fees & taxes imposed by
their Government. Please do not ask us to falsify the export documents.
RETURNS:
If
you
are not happy with the part, you can return it within 30 days
for a full refund of the purchase price. The shipping
costs that we incur to get the item to you are not refundable. The part
must be in an as received
condition and can not have been installed on your stove or any other
application. The part must be in the original box-package with all internal
contents intact. Once you install the part, it becomes a used part and
is not returnable, except under the terms of the manufacturers limited
warranty.