1 Pair - Universal Clear Lens Turn Signals
Amber Bulb
Are you tired of bumping into your old, over-sized side markers? Do you need to replace a broken OEM Turn Signal Light or just want to add to your existing system? We have just the Blinker for you. Upgrade with our bright Universal Surface Mount Turn Signals. Our Signals are designed with a High Impact PVC Plastic Lens Housing, incandescent Bulb, and a Metal Mounting Base. These Signals are universal, so you can install them on the front or rear with little to no modification, depending on your application.
Stats:
Name: Gharial
Dimensions: Multiple, please see photo(s)
Lens: Clear High Impact PVC Plastic
Bulb: Amber Incandescent Bulb, Single Filament, 12 Volt, 23 Watt, 1156 Style Base
Base: Metal Mounting Base
Wiring: Two Wire, 12 Volt Systems
Fitment Information: This is a Universal Turn Signal Light; therefore, it has unlimited uses and mounting possibilities. This includes, but is not limited too: Sportbikes, Cruisers, Scooters, ATV, Quad, UTV, MX, Dirt Bike, Enduro, Dual Sport, Golf Carts, Trailers, and even Snowmobiles.
Note:For a different color Signal, please see LuckyBike-Accessories Storefront to make appropriate choice.
Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; depending on where you decide to mount them, it may require modification to the fairing. Once you pick a mounting location, you'll need to locate the existing Turn Signal Wires on your Motorcycle and identify whether you have 2 or 3 Wire System. For a motorcycle with a 3 Wire System: your Running Light Wires are not used for this installation as our lights are not designed or marketed for that application. For a 2 Wire System: the two wires coming from your bike should be the Turn Signal Power (Positive Wire), and a Ground (Negative Wire). Attach our GRAY Turn Signal Wire to the Bikes Positive Signal Wire. Attach our BLACK Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly prior to putting everything back together. If it's good, repeat the process for the other side. Reassemble, Ride and Enjoy!
