1 Pair - Universal Amber Turn Signals
Large Cat Eye Clear Lens - Amber Single Filament Bulb

Upgrade with our bright Universal Turn Signals. These Signals are not a direct OEM Replacement, but offer a low profile designed Lens, an incandescent Bulb, and a High Impact PVC Plastic Housing. These Signals are universal, so you can install them as a Surface or Flush Mount on the front or rear of your Motorcycle, ATV, UTV, or Scooter with little to no modification required, depending on your application. Visit our Storefront to see our other available Colors and Sizes.

Stats:
Name: Lion
Dimensions: Multiple, please see photo(s)
Housing: High Impact PVC Plastic, Clear Lens
Bulb: Amber Incandescent Bulb, Single Filament, 12 Volt, 5 Watt, 1156 Style Base
Wiring: Two Wire, 12 Volt Systems, approximate Length of wires = 13.5 inch (343mm)

Fitment Information: This is a Universal Turn Signal Light; therefore, it has unlimited uses and mounting possibilities. This includes, but is not limited too: Sportbikes, Cruisers, Scooters, ATV, Quad, UTV, MX, Dirt Bike, Enduro, Dual Sport, Golf Carts, and even Snowmobiles.

Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty is low as these are a bolt on application. Once you pick a mounting location it's time to locate the existing Turn Signal Wires on your bike, you should have either a 3 or 2 wire system. 
3 Wire System: the wire for the running lights are not used in this installation.
2 Wire System: the two wires on your bike will be the Turn Signal Power (Positive Wire) and a Ground (Negative Wire). You may have to splice in an extra length of wire in order to reach from your current OEM light plugs to these aftermarket ones. Attach the YELLOW (or RED) Turn Signal Wire to the Bikes Positive Signal Wire and the BLACK Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly prior to putting everything back together. If it's good, repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque mounting nut when installing, it should be slightly over hand tight and not forcefully torqued down. For added security you could add Silicon Tape to plastic bolts and Thread locker (Blue/Medium) to metal nuts and bolts.

Signals Flashing Rapidly?
Fix it with our optional
Relays or Resistors

After you have purchased all the items you are interested in send us one consolidated payment for all items. This will ensure you have only one order in the system and we can get you the best shipping price.