Three Backlight Color Available:Blue/White/Green
For Both Electric & Water System Energy saving
Description
Features:
1. Suitable for almost all electric under floor heating systems.
2. 5+2 or 7 days 4 periods programmable. Clock controlled program mode. Each day can be split into 24 single hour periods. Each of these periods can be set to operate at either a comfort temperature, or an energy saving temperature. Both temperatures (Between 5oC & 30oC) are chosen by the user. The thermostat will operate automatically according to the time and temperature that has been set for each period. (The energy saving mode can be set to a temperature low enough that effectively means the heating is turned off) A typical example of a set program would be:
*Monday
*Comfort mode @ 25oC from 6.00a.m to 9.00a.m
* Energy save mode @ 14oC from 9:00a.m to 4:00p.m
* Comfort mode @ 25oC from 4.00p.m to 10.00p.m
* Energy save mode @14oC from 10.00p.m to 6.00 a.m.
3. 7 day timer. Each day of the week can be programmed individually.
4.Holiday mode - Temperature can be easily switched to a low level or off whilst the room is unoccupied for a long period of time.
5.The scheduled event program can be easily overridden at any time and the operating temperature can be set to a desired level. The thermostat will then revert back to the pre-set temperature at the next change of mode.
6.The scheduled event program can be switched off allowing manual operation of the thermostat if desired.
7.Combination of temperature sensor options - Air sensor / Floor sensor or Air & Floor sensor.
8.Over heating protection cut out function. (Temperature to be set by user)
9.Floor sensor with 3m cable included.
10.Air sensor built into thermostat.
11.Battery backup to save settings during power failure.
12.It is also compatible with non-underfloor heating system as sensor can be disabled.
13.The backlight can be automatically closed in working mode if you don't operate it continuously.
14.The thermostat will switch a maximum load of 16amps. (Please see advice below)
15.Blue back lit LCD screen
16.Two sensors: built-in sensor and floor sensor.
17.1 year manufacturer's warranty.
18.Full operating & installation instructions included.
TECHNICAL DATA:
| Power Supply: |
AC220V +/- 10% 50/60Hz (compatible with 110V) |
| Max Load: |
16A |
| Power Consumption: |
2W |
| Setting Range: |
5 - 30°C |
| Floor Overheating Protection: |
30 - 60 °C |
| Switching Differential: |
1.0°C |
| Ambient Temperature: |
-10 - 60°C |
| Protective Housing: |
IP20 |
| Housing Material: |
ABS & PC Fire-resistant |
| Certification: |
CE |
| Floor Sensor: |
Rubber-thermoplastic NTC 10K |
| Internal Air Sensor: |
NTC 10K
|
Package Contents:
1) 1pc Electric Heating Thermostat.
2) 1pc 3m cable for Floor sensor.
3) 1pc User Guide for operating & installation instructions.
