eBay

Product Description

Description:

User manual
VER:1.0
Thank you for purchasing this product. For optimum performance and safety please read these instructions carefully before connecting operating or adjusting this product. Please keep this manual for future reference.
1. INTRODUCTION

The HDMI Extender over Single Cat5e/6 with IR extends high de+inition video and audio signals and IR, at a distance of up to 164ft/50m over a single Cat5e/6 cable. Features EDID management, which allows and encourages source and display handshake for
seamless integration. With only one cost effective Cat5e/6 cable, high de+inition sources with HDMI outputs can be connected to high de+inition displays with HDMI inputs over long distances. Deep color video, DTS-HD or Dolby TrueHD audio is supported and compatible with the extender. In addition, the extender is also equipped with pass-through which allows for source control

The extender includes two units: transmitting unit and receiving unit. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR control signals. The extender offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application

3. Features
* Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable.
* Support copy EDID from receiver display or loop out display
* Allows for cascading via additional HDMI loop out port.
* Support Power over cable function.
* Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or Cat6 cable.
* Works with HDMI and HDCP compliant devices
* Supports up to 1080p High Definition resolution.
* Compact design for an easy and flexible installation.
4. Spec0ications
Video Bandwidth: Single-link 165Mhz 4.95Gbps
Video Support: 480i/480p/720p/1080i/1080p@60
Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
Transmission Range: HD 1080p 24-bit color up to 50m 164ft
Input TMDS Signal: 3.3 volts
Input DDC Signal: 5.0 volts/P-P
ESD Protection: Human Body model:   +/- 8 kV (air-gap discharge)
+/- 4 kV (contact discharge)
HDMI connector: Type A 19 pin female
RJ-45 connector: WE/SS 8P8C
3.5mm connector: (TX and RX) IR Receiver/IR Blaster
MECHANICAL SPECS
Housing: Metal enclosure
Power Supply: (1) 5V1A DC
Power consumption: 1.5 watts (TX); 1.0 watts (RX)
Operation temperature: 32~104 °F
Storage temperature: -4 ~140 °F
Relative humidity: 20~90 % RH (no condensation)

5. Panel descriptions

5.1 Transmitting unit

1. HDMI in: This slot is where you connect the HDMI output port of your source equipment such as DVD/Blu-ray players or Set-Top-Box with an HDMI cable.
2. EDID: The switcher can switch copy EDID function, switch to right position, the extender will copy hdmi loop out display EDID information to source. Switch to left position,
the extender will copy Receiver display EDID to source.
3. HDMI out: This slot is to connect the HDMI in put of your display such as an HDTV.
4. IR out: Connect the IR Blaster cable included in the package for IR signal transmission.
Pace the IR blaster in direct line-of-sight of the equipment to be controlled.
5. Power LED: This LED will illuminate when the device is connected with power supply.
6. CAT: Connect the CAT output of the transmitter with the CAT input of the receiver with CAT5E/6 cable.
7. Link LED: This LED will illuminate when the device is connected to HDMI source.
8. DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor to an AC outlet.

5.2 Receiver unit

1. EQ switcher: HDMI Receiver equalizer switcher.
2. HDMI out: This slot is to connect the HDMI input port of your display such as an HDTV.
3. IR in: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
4. Power LED: This LED will illuminate when the device is connected with power supply.
5. CAT: Connect the CAT input of the receiver with the CAT output of the transmitter with CAT5E/6 cable.
6. Lock LED: This LED will illuminate when the HDMI signal from the transmitter is stable.
7. DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor to an AC outlet.(For POC function, the receiver does not need power supply)

5.3 RX Equalizer distance adjust
If you see flickering or blinking image on the display, adjust the EQ switch to improve the cable skew. MAX stands for the strongest HDMI signal level for the longest possible transmission length while MIN stands for the weakest HDMI signal level for short
transmission length. Adjust the signal level from MIN to MAX until desired video quality is
displayed .

Recommended EQ setting
Position   Cable Length   Position   Cable Length

   under 15m (49.5ft)      15-30m (49.5 ft - 99ft)
    30-40m (99ft - 132ft)      40-50m(132ft -164ft)

6.CONNECTION DIAGRAM

7. CONNECT AND OPERATE
Connect a source such as a Blu-Ray Player, game
console, A/V Receiver, Cable or Satellite Receiver, etc.
to the HDMI input on the Transmitting unit.
2. Connect a display such as an HDTV or HD Projector to the HDMI output on the Receiving unit.
3. Connect a single Category 5e/6 up to 164ft/50m to the output of the Transmitting unit, and the other end to the input of the Receiving unit.
4. For power, plug both the Transmitting unit and Receiving unit with the included power supplies.
5. Power on each device in the same sequence (receiver and transmitter will already be powered when either unit is plugged in.)
At this point the display connected should display the source signal connected to the extender set. If no signal is being displayed, check the receiver EQ swithcer. If a display is having dif+iculty receiving a signal, see EDID section and perform EDID learning or access the display's menu and adjust the resolution (lowest to highest until signal is displayed). A 24 Hz vertical refresh rate may work better than 60 Hz or higher. Use the source remote at the receiver emitter to test IR functionality. If the IR remote function is not responding, check the emitters to ensure they are placed correctly and are plugged into the correct IR jacks on the Extender set receiving and transmitting
units.
Wideband IR(30KHz---60KHz) introduction


IR BLASTER (TX)
To control the source: Plug IR Blaster into IR TX port of transmitter unit; place blaster in front of the IR eye of the source.
IR RECEIVER (RX)
To control the source: Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display.

Included:

1x HDMI Transmitter
1x HDMI Receiver
1x Windband IR Tx cable
1x Windband IR Rx cable
1x 5V1A DC Power Supply Adaptor
1x Product Manual

pictures

payment

We accept PayPal only.
All major credit cards are accepted through secure payment processor PayPal.
Payment must be received within 7 business days of auction closing.
If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.

Warranty

12 months Warranty. Buy with confidence!
If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.
If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.

policies

We are not responsible for any custom duty or import tax.
We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it.
All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible.
Serious Buyer Only! Please place bid only if you agree with all the terms.
If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback.
We believe we can produce a positive outcome to any situation and will work hard to earn your praise.
If you were pleased with this transaction, Please give us 5 star rating, thanks!

Shipping

We Ship to Worldwide.
Items will be shipped within 1 business day on payment received.
Item are shipped from shenzhen using Airmail, reach most of the countries within 10 to 20.
Delivery time depends on destination and other factors, it may takes up to 20 business days.

Our office hours are 9:00 a.m to 6:00 p.m (GMT +8) of Monday to Saturday.
And our Office is closed on Sunday and public holidays.
We apologize for the late reply during the holidays.